From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Wed, 27 May 2015 17:39:40 +0530 Subject: [PATCH 1/3] phy-sun4i-usb: Add a sunxi specific function for setting squelch-detect In-Reply-To: <20150526153816.GK26599@saruman.tx.rr.com> References: <1427626248-6257-1-git-send-email-hdegoede@redhat.com> <1427626248-6257-2-git-send-email-hdegoede@redhat.com> <20150526153816.GK26599@saruman.tx.rr.com> Message-ID: <5565B404.1050003@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Felipe, On Tuesday 26 May 2015 09:08 PM, Felipe Balbi wrote: > On Sun, Mar 29, 2015 at 12:50:46PM +0200, Hans de Goede wrote: >> The sunxi otg phy has a bug where it wrongly detects a high speed squelch >> when reset on the root port gets de-asserted with a lo-speed device. >> >> The workaround for this is to disable squelch detect before de-asserting >> reset, and re-enabling it after the reset de-assert is done. Add a sunxi >> specific phy function to allow the sunxi-musb glue to do this. >> >> Signed-off-by: Hans de Goede > > Kishon, do you want to take this patch? This patch should go along with the other patch in the series. So I think it's better you take this series along with the musb sunxi patch series. Acked-by: Kishon Vijay Abraham I Thanks Kishon