* [PATCH] ARM: Kconfig: Select clocksource in STM32 entry
@ 2015-05-22 21:50 Maxime Coquelin
2015-05-30 8:14 ` Maxime Coquelin
0 siblings, 1 reply; 4+ messages in thread
From: Maxime Coquelin @ 2015-05-22 21:50 UTC (permalink / raw)
To: linux-arm-kernel
STM32 clocksource driver needs to be selected if ARCH_STM32.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
Hi Arnd,
This patch applies on top of arm-soc's next/soc branch, so that you don't
get conflicts with Stefan's ARM_SINGLE_ARMV7M patch.
Regards,
Maxime
---
arch/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b7a7d15..1cb59af 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -978,6 +978,7 @@ config ARCH_STM32
depends on ARM_SINGLE_ARMV7M
select ARCH_HAS_RESET_CONTROLLER
select ARMV7M_SYSTICK
+ select CLKSRC_STM32
select RESET_CONTROLLER
help
Support for STMicroelectronics STM32 processors.
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: Kconfig: Select clocksource in STM32 entry
2015-05-22 21:50 [PATCH] ARM: Kconfig: Select clocksource in STM32 entry Maxime Coquelin
@ 2015-05-30 8:14 ` Maxime Coquelin
2015-05-30 8:16 ` Maxime Coquelin
0 siblings, 1 reply; 4+ messages in thread
From: Maxime Coquelin @ 2015-05-30 8:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On 05/22/2015 11:50 PM, Maxime Coquelin wrote:
> STM32 clocksource driver needs to be selected if ARCH_STM32.
>
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> ---
> Hi Arnd,
>
> This patch applies on top of arm-soc's next/soc branch, so that you don't
> get conflicts with Stefan's ARM_SINGLE_ARMV7M patch.Hi
>
> Regards,
> Maxime
> ---
> arch/arm/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index b7a7d15..1cb59af 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -978,6 +978,7 @@ config ARCH_STM32
> depends on ARM_SINGLE_ARMV7M
> select ARCH_HAS_RESET_CONTROLLER
> select ARMV7M_SYSTICK
> + select CLKSRC_STM32
> select RESET_CONTROLLER
> help
> Support for STMicroelectronics STM32 processors.
This patch is needed for STM32 to boot.
Can you pick it for v4.2?
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: Kconfig: Select clocksource in STM32 entry
2015-05-30 8:14 ` Maxime Coquelin
@ 2015-05-30 8:16 ` Maxime Coquelin
2015-06-01 15:56 ` Arnd Bergmann
0 siblings, 1 reply; 4+ messages in thread
From: Maxime Coquelin @ 2015-05-30 8:16 UTC (permalink / raw)
To: linux-arm-kernel
With Daniel's valid address.
On 05/30/2015 10:14 AM, Maxime Coquelin wrote:
> Hi Arnd,
>
> On 05/22/2015 11:50 PM, Maxime Coquelin wrote:
>> STM32 clocksource driver needs to be selected if ARCH_STM32.
>>
>> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
>> ---
>> Hi Arnd,
>>
>> This patch applies on top of arm-soc's next/soc branch, so that
>> you don't
>> get conflicts with Stefan's ARM_SINGLE_ARMV7M patch.Hi
>>
>> Regards,
>> Maxime
>> ---
>> arch/arm/Kconfig | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index b7a7d15..1cb59af 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -978,6 +978,7 @@ config ARCH_STM32
>> depends on ARM_SINGLE_ARMV7M
>> select ARCH_HAS_RESET_CONTROLLER
>> select ARMV7M_SYSTICK
>> + select CLKSRC_STM32
>> select RESET_CONTROLLER
>> help
>> Support for STMicroelectronics STM32 processors.
>
> This patch is needed for STM32 to boot.
> Can you pick it for v4.2?
>
> Thanks,
> Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: Kconfig: Select clocksource in STM32 entry
2015-05-30 8:16 ` Maxime Coquelin
@ 2015-06-01 15:56 ` Arnd Bergmann
0 siblings, 0 replies; 4+ messages in thread
From: Arnd Bergmann @ 2015-06-01 15:56 UTC (permalink / raw)
To: linux-arm-kernel
On Saturday 30 May 2015 10:16:12 Maxime Coquelin wrote:
> With Daniel's valid address.
>
> On 05/30/2015 10:14 AM, Maxime Coquelin wrote:
> > Hi Arnd,
> >
> > On 05/22/2015 11:50 PM, Maxime Coquelin wrote:
> >> STM32 clocksource driver needs to be selected if ARCH_STM32.
> >>
> >> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> >> ---
> >> Hi Arnd,
> >>
> >> This patch applies on top of arm-soc's next/soc branch, so that
> >> you don't
> >> get conflicts with Stefan's ARM_SINGLE_ARMV7M patch.Hi
> >>
>
Applied to next/soc, thanks!
Arnd
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-06-01 15:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-22 21:50 [PATCH] ARM: Kconfig: Select clocksource in STM32 entry Maxime Coquelin
2015-05-30 8:14 ` Maxime Coquelin
2015-05-30 8:16 ` Maxime Coquelin
2015-06-01 15:56 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).