From mboxrd@z Thu Jan  1 00:00:00 1970
From: nicolas.ferre@atmel.com (Nicolas Ferre)
Date: Thu, 4 Jun 2015 10:01:42 +0200
Subject: [PATCH v2 16/16] ARM: at91/dt: Add Acme Arietta G25
In-Reply-To: <1433334258-14741-17-git-send-email-alexandre.belloni@free-electrons.com>
References: <1433334258-14741-1-git-send-email-alexandre.belloni@free-electrons.com>
 <1433334258-14741-17-git-send-email-alexandre.belloni@free-electrons.com>
Message-ID: <557005E6.3090403@atmel.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Le 03/06/2015 14:24, Alexandre Belloni a ?crit :
> Add a minimum Device Tree for Acme Arietta G25.
> http://acme.systems/arietta
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Cc: Sergio Tanzilli <tanzilli@acmesystems.it>

BTW Sergio, can I add your "Acked-by" tag?

Bye,

> ---
>  arch/arm/boot/dts/Makefile            |  1 +
>  arch/arm/boot/dts/at91-ariettag25.dts | 79 +++++++++++++++++++++++++++++++++++
>  2 files changed, 80 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-ariettag25.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8c3da289a00b..b224a3a56f09 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
>  	at91sam9n12ek.dtb \
>  	at91sam9rlek.dtb \
>  	at91-ariag25.dtb \
> +	at91-ariettag25.dtb \
>  	at91-cosino_mega2560.dtb \
>  	at91-kizboxmini.dtb \
>  	at91sam9g15ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
> new file mode 100644
> index 000000000000..c514502081d2
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-ariettag25.dts
> @@ -0,0 +1,79 @@
> +/*
> + * Device Tree file for Arietta G25
> + * This device tree is minimal, to activate more peripherals, see:
> + * http://dts.acmesystems.it/arietta/
> + */
> +/dts-v1/;
> +#include "at91sam9g25.dtsi"
> +/ {
> +	model = "Acme Systems Arietta G25";
> +	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
> +
> +	aliases {
> +		serial0 = &dbgu;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		reg = <0x20000000 0x8000000>;
> +	};
> +
> +	clocks {
> +		slow_xtal {
> +			clock-frequency = <32768>;
> +		};
> +
> +		main_xtal {
> +			clock-frequency = <12000000>;
> +		};
> +	};
> +
> +	ahb {
> +		apb {
> +			mmc0: mmc at f0008000 {
> +				pinctrl-0 = <
> +				  &pinctrl_mmc0_slot0_clk_cmd_dat0
> +				  &pinctrl_mmc0_slot0_dat1_3>;
> +				status = "okay";
> +
> +				slot at 0 {
> +					reg = <0>;
> +					bus-width = <4>;
> +				};
> +			};
> +
> +			usb2: gadget at f803c000 {
> +				status = "okay";
> +			};
> +
> +			dbgu: serial at fffff200 {
> +				status = "okay";
> +			};
> +
> +			rtc at fffffeb0 {
> +				status = "okay";
> +			};
> +		};
> +
> +		usb0: ohci at 00600000 {
> +			status = "okay";
> +			num-ports = <3>;
> +		};
> +
> +		usb1: ehci at 00700000 {
> +			status = "okay";
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		arietta_led {
> +			label = "arietta_led";
> +			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> 


-- 
Nicolas Ferre