From mboxrd@z Thu Jan  1 00:00:00 1970
From: nicolas.ferre@atmel.com (Nicolas Ferre)
Date: Thu, 4 Jun 2015 10:02:41 +0200
Subject: [PATCH] ARM: at91/dts: kizbox: fix mismatch LED PWM device
In-Reply-To: <1433324663-20208-1-git-send-email-g.portay@overkiz.com>
References: <1433324663-20208-1-git-send-email-g.portay@overkiz.com>
Message-ID: <55700621.4080900@atmel.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Le 03/06/2015 11:44, Ga?l PORTAY a ?crit :
> The network_red LED uses the 4th PWM device.
> 
> Signed-off-by: Ga?l PORTAY <g.portay@overkiz.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

And stacked on at91-4.2-dt.

Bye,

> ---
>  arch/arm/boot/dts/at91-kizbox.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index a0e63ff..cf1628f 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -205,7 +205,7 @@
>  
>  		network_red {
>  			label = "pwm:red:network";
> -			pwms = <&tcb_pwm 3 10000000 PWM_POLARITY_INVERTED>;
> +			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
>  			max-brightness = <255>;
>  			linux,default-trigger = "default-on";
>  		};
> 


-- 
Nicolas Ferre