[PATCH 04/10] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR

[eric.auger@linaro.org (Eric Auger)]

On 06/08/2015 07:03 PM, Marc Zyngier wrote:
> Now that struct vgic_lr supports the LR_HW bit and carries a hwirq
> field, we can encode that information into the list registers.
> 
> This patch provides implementations for both GICv2 and GICv3.
> 
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> ---
>  include/linux/irqchip/arm-gic-v3.h |  3 +++
>  include/linux/irqchip/arm-gic.h    |  3 ++-
>  virt/kvm/arm/vgic-v2.c             | 16 +++++++++++++++-
>  virt/kvm/arm/vgic-v3.c             | 21 ++++++++++++++++++---
>  4 files changed, 38 insertions(+), 5 deletions(-)
> 
> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
> index ffbc034..cf637d6 100644
> --- a/include/linux/irqchip/arm-gic-v3.h
> +++ b/include/linux/irqchip/arm-gic-v3.h
> @@ -268,9 +268,12 @@
>  
>  #define ICH_LR_EOI			(1UL << 41)
>  #define ICH_LR_GROUP			(1UL << 60)
> +#define ICH_LR_HW			(1UL << 61)
>  #define ICH_LR_STATE			(3UL << 62)
>  #define ICH_LR_PENDING_BIT		(1UL << 62)
>  #define ICH_LR_ACTIVE_BIT		(1UL << 63)
> +#define ICH_LR_PHYS_ID_SHIFT		32
> +#define ICH_LR_PHYS_ID_MASK		(0x3ffUL << ICH_LR_PHYS_ID_SHIFT)
>  
>  #define ICH_MISR_EOI			(1 << 0)
>  #define ICH_MISR_U			(1 << 1)
> diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
> index 9de976b..ca88dad 100644
> --- a/include/linux/irqchip/arm-gic.h
> +++ b/include/linux/irqchip/arm-gic.h
> @@ -71,11 +71,12 @@
>  
>  #define GICH_LR_VIRTUALID		(0x3ff << 0)
>  #define GICH_LR_PHYSID_CPUID_SHIFT	(10)
> -#define GICH_LR_PHYSID_CPUID		(7 << GICH_LR_PHYSID_CPUID_SHIFT)
> +#define GICH_LR_PHYSID_CPUID		(0x3ff << GICH_LR_PHYSID_CPUID_SHIFT)
>  #define GICH_LR_STATE			(3 << 28)
>  #define GICH_LR_PENDING_BIT		(1 << 28)
>  #define GICH_LR_ACTIVE_BIT		(1 << 29)
>  #define GICH_LR_EOI			(1 << 19)
> +#define GICH_LR_HW			(1 << 31)
>  
>  #define GICH_VMCR_CTRL_SHIFT		0
>  #define GICH_VMCR_CTRL_MASK		(0x21f << GICH_VMCR_CTRL_SHIFT)
> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
> index f9b9c7c..8d7b04d 100644
> --- a/virt/kvm/arm/vgic-v2.c
> +++ b/virt/kvm/arm/vgic-v2.c
> @@ -48,6 +48,10 @@ static struct vgic_lr vgic_v2_get_lr(const struct kvm_vcpu *vcpu, int lr)
>  		lr_desc.state |= LR_STATE_ACTIVE;
>  	if (val & GICH_LR_EOI)
>  		lr_desc.state |= LR_EOI_INT;
> +	if (val & GICH_LR_HW) {
> +		lr_desc.state |= LR_HW;
> +		lr_desc.hwirq = (val & GICH_LR_PHYSID_CPUID) >> GICH_LR_PHYSID_CPUID_SHIFT;
> +	}
>  
>  	return lr_desc;
>  }
> @@ -55,7 +59,9 @@ static struct vgic_lr vgic_v2_get_lr(const struct kvm_vcpu *vcpu, int lr)
>  static void vgic_v2_set_lr(struct kvm_vcpu *vcpu, int lr,
>  			   struct vgic_lr lr_desc)
>  {
> -	u32 lr_val = (lr_desc.source << GICH_LR_PHYSID_CPUID_SHIFT) | lr_desc.irq;
> +	u32 lr_val;
> +
> +	lr_val = lr_desc.irq;
>  
>  	if (lr_desc.state & LR_STATE_PENDING)
>  		lr_val |= GICH_LR_PENDING_BIT;
> @@ -64,6 +70,14 @@ static void vgic_v2_set_lr(struct kvm_vcpu *vcpu, int lr,
>  	if (lr_desc.state & LR_EOI_INT)
>  		lr_val |= GICH_LR_EOI;
>  
> +	if (lr_desc.state & LR_HW) {
> +		lr_val |= GICH_LR_HW;
> +		lr_val |= (u32)lr_desc.hwirq << GICH_LR_PHYSID_CPUID_SHIFT;
shouldn't we test somewhere that the hwirq is between 16 and 1019. Else
behavior is unpredictable according to v2 spec. when queuing into the LR
we currently check the linux irq vlr.irq >= VGIC_NR_SGIS if I am not wrong.

besides Reviewed-by: Eric Auger <eric.auger@linaro.org>

Eric
> +	}
> +
> +	if (lr_desc.irq < VGIC_NR_SGIS)
> +		lr_val |= (lr_desc.source << GICH_LR_PHYSID_CPUID_SHIFT);
> +
>  	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = lr_val;
>  }
>  
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index dff0602..afbf925 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -67,6 +67,10 @@ static struct vgic_lr vgic_v3_get_lr(const struct kvm_vcpu *vcpu, int lr)
>  		lr_desc.state |= LR_STATE_ACTIVE;
>  	if (val & ICH_LR_EOI)
>  		lr_desc.state |= LR_EOI_INT;
> +	if (val & ICH_LR_HW) {
> +		lr_desc.state |= LR_HW;
> +		lr_desc.hwirq = (val >> ICH_LR_PHYS_ID_SHIFT) & GENMASK(9, 0);
> +	}
>  
>  	return lr_desc;
>  }
> @@ -84,10 +88,17 @@ static void vgic_v3_set_lr(struct kvm_vcpu *vcpu, int lr,
>  	 * Eventually we want to make this configurable, so we may revisit
>  	 * this in the future.
>  	 */
> -	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
> +	switch (vcpu->kvm->arch.vgic.vgic_model) {
> +	case KVM_DEV_TYPE_ARM_VGIC_V3:
>  		lr_val |= ICH_LR_GROUP;
not related to that patch but why LR_GROUP setting does depend on guest
view? Why isn'it always set to 1?
> -	else
> -		lr_val |= (u32)lr_desc.source << GICH_LR_PHYSID_CPUID_SHIFT;
> +		break;
> +	case  KVM_DEV_TYPE_ARM_VGIC_V2:
> +		if (lr_desc.irq < VGIC_NR_SGIS)
> +			lr_val |= (u32)lr_desc.source << GICH_LR_PHYSID_CPUID_SHIFT;
> +		break;
> +	default:
> +		BUG();
> +	}
>  
>  	if (lr_desc.state & LR_STATE_PENDING)
>  		lr_val |= ICH_LR_PENDING_BIT;
> @@ -95,6 +106,10 @@ static void vgic_v3_set_lr(struct kvm_vcpu *vcpu, int lr,
>  		lr_val |= ICH_LR_ACTIVE_BIT;
>  	if (lr_desc.state & LR_EOI_INT)
>  		lr_val |= ICH_LR_EOI;
> +	if (lr_desc.state & LR_HW) {
> +		lr_val |= ICH_LR_HW;
> +		lr_val |= ((u64)lr_desc.hwirq) << ICH_LR_PHYS_ID_SHIFT;
> +	}
>  
>  	vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[LR_INDEX(lr)] = lr_val;
>  }
>