From mboxrd@z Thu Jan  1 00:00:00 1970
From: vladimir_zapolskiy@mentor.com (Vladimir Zapolskiy)
Date: Thu, 25 Jun 2015 19:22:07 +0300
Subject: [PATCH v2 2/2] clk: imx: clk-imx6q: Provide initial IPU clock
 settings for mx6dl
In-Reply-To: <1435241830-20187-2-git-send-email-fabio.estevam@freescale.com>
References: <1435241830-20187-1-git-send-email-fabio.estevam@freescale.com>
 <1435241830-20187-2-git-send-email-fabio.estevam@freescale.com>
Message-ID: <558C2AAF.1010707@mentor.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Fabio,

On 25.06.2015 17:17, Fabio Estevam wrote:
> Currently it is not possible to use HDMI and LVDS at the same time on a 
> imx6dl-sabresd board.
> 
> Fix this usecase by setting IMX6QDL_CLK_PLL3_PFD1_540M to 540MHz and
> also by setting it as the parent of IMX6QDL_CLK_IPU1_SEL.
> 
> Based on the configuration done in the FSL kernel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - None. Newly introduced.
> 
>  drivers/clk/imx/clk-imx6q.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
> index d046f8e..d735d8f 100644
> --- a/drivers/clk/imx/clk-imx6q.c
> +++ b/drivers/clk/imx/clk-imx6q.c
> @@ -494,6 +494,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  		clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>  	}
>  
> +	if (clk_on_imx6dl()) {
> +		clk_set_rate(clk[IMX6QDL_CLK_PLL3_PFD1_540M], 540000000);

I believe here IMX6QDL_CLK_PLL3_PFD1_540M rate can be set independently
of SoC flavour.

> +		clk_set_parent(clk[IMX6QDL_CLK_IPU1_SEL], clk[IMX6QDL_CLK_PLL3_PFD1_540M]);
> +	}
> +
>  	clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>  	clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
>  	clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
> 

--
With best wishes,
Vladimir