[PATCH v4] ARM: dts: mt8173: support arm64 cpuidle-dt

[PATCH v4] ARM: dts: mt8173: support arm64 cpuidle-dt

[Howard Chen]

This patch adds an idle-states node to describe the mt8173 idle states and
also adds references to the idle-states node in all CPU nodes.

Changes:

v4:
- Refine the property ordering.

v3:
- Add the local-timer-stop property.

v2:
- Remove the change to the PSCI version.
- Remove the cluster idle state.
- Fine tune the latency properties of the idle state.

Signed-off-by: Howard Chen <howard.chen@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 27237a1..5587375 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -49,6 +49,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu1: cpu at 1 {
@@ -56,6 +58,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x001>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu2: cpu at 100 {
@@ -63,6 +66,7 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x100>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu3: cpu at 101 {
@@ -70,6 +74,20 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x101>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <639>;
+				exit-latency-us = <680>;
+				min-residency-us = <1088>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
 		};
 	};
 
-- 
1.9.1

[PATCH v4] ARM: dts: mt8173: support arm64 cpuidle-dt

[Daniel Lezcano]

On 06/04/2015 09:13 AM, Howard Chen wrote:
> This patch adds an idle-states node to describe the mt8173 idle states and
> also adds references to the idle-states node in all CPU nodes.
>
> Changes:
>
> v4:
> - Refine the property ordering.
>
> v3:
> - Add the local-timer-stop property.
>
> v2:
> - Remove the change to the PSCI version.
> - Remove the cluster idle state.
> - Fine tune the latency properties of the idle state.
>
> Signed-off-by: Howard Chen <howard.chen@linaro.org>
> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

A bit late but ...

Sounds good.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[PATCH v4] ARM: dts: mt8173: support arm64 cpuidle-dt

[Matthias Brugger]

2015-06-29 10:18 GMT+02:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
> On 06/04/2015 09:13 AM, Howard Chen wrote:
>>
>> This patch adds an idle-states node to describe the mt8173 idle states and
>> also adds references to the idle-states node in all CPU nodes.
>>
>> Changes:
>>
>> v4:
>> - Refine the property ordering.
>>
>> v3:
>> - Add the local-timer-stop property.
>>
>> v2:
>> - Remove the change to the PSCI version.
>> - Remove the cluster idle state.
>> - Fine tune the latency properties of the idle state.
>>
>> Signed-off-by: Howard Chen <howard.chen@linaro.org>
>> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>
>
> A bit late but ...
>
> Sounds good.
>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

I deleted the change log part and applied it to v4.2-next/arm64

Thanks,
Matthias