From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
Date: Mon, 29 Jun 2015 14:45:15 +0200 [thread overview]
Message-ID: <55913DDB.2000008@free-electrons.com> (raw)
In-Reply-To: <1434628373-11834-3-git-send-email-simon.guinot@sequanux.org>
Hi Simon,
On 18/06/2015 13:52, Simon Guinot wrote:
> This patch adds DT entries for the LEDs found on the Kirkwood-based
> LaCie boards 2Big and 5Big Network v2.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
> ---
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thanks,
Gregory
> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
> 2 files changed, 140 insertions(+)
>
> diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
> index 36155b749d9f..3cc5e469df06 100644
> --- a/arch/arm/boot/dts/kirkwood-net5big.dts
> +++ b/arch/arm/boot/dts/kirkwood-net5big.dts
> @@ -86,6 +86,66 @@
> clock-frequency = <32768>;
> };
> };
> +
> + netxbig-leds {
> + blue-sata2 {
> + label = "netxbig:blue:sata2";
> + mode-addr = <5>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata2 {
> + label = "netxbig:red:sata2";
> + mode-addr = <5>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata3 {
> + label = "netxbig:blue:sata3";
> + mode-addr = <6>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata3 {
> + label = "netxbig:red:sata3";
> + mode-addr = <6>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata4 {
> + label = "netxbig:blue:sata4";
> + mode-addr = <7>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata4 {
> + label = "netxbig:red:sata4";
> + mode-addr = <7>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + };
> };
>
> &mdio {
> diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> index b0cfb7cd30b9..5e7ed1c7e1b2 100644
> --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> @@ -13,6 +13,7 @@
> * warranty of any kind, whether express or implied.
> */
>
> +#include <dt-bindings/leds/leds-netxbig.h>
> #include "kirkwood.dtsi"
> #include "kirkwood-6281.dtsi"
>
> @@ -105,6 +106,85 @@
> gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + netxbig_gpio_ext: netxbig-gpio-ext {
> + compatible = "lacie,netxbig-gpio-ext";
> +
> + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
> + &gpio1 16 GPIO_ACTIVE_HIGH
> + &gpio1 17 GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
> + &gpio1 13 GPIO_ACTIVE_HIGH
> + &gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> + };
> +
> + netxbig-leds {
> + compatible = "lacie,netxbig-leds";
> +
> + gpio-ext = <&netxbig_gpio_ext>;
> +
> + timers = <NETXBIG_LED_TIMER1 500 500
> + NETXBIG_LED_TIMER2 500 1000>;
> +
> + blue-power {
> + label = "netxbig:blue:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 1
> + NETXBIG_LED_TIMER1 3
> + NETXBIG_LED_TIMER2 7>;
> + bright-addr = <1>;
> + bright-max = <7>;
> + };
> + red-power {
> + label = "netxbig:red:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <1>;
> + bright-max = <7>;
> + };
> + blue-sata0 {
> + label = "netxbig:blue:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata0 {
> + label = "netxbig:red:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata1 {
> + label = "netxbig:blue:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata1 {
> + label = "netxbig:red:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + };
> };
>
> &mdio {
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2015-06-29 12:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 11:52 [PATCH v2 0/3] Add DT support for netxbig LEDs Simon Guinot
2015-06-18 11:52 ` [PATCH v2 1/3] leds: netxbig: add device tree binding Simon Guinot
2015-06-18 11:52 ` [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards Simon Guinot
2015-06-29 12:45 ` Gregory CLEMENT [this message]
2015-06-18 11:52 ` [PATCH v2 3/3] ARM: mvebu: remove static LED setup " Simon Guinot
2015-06-29 12:45 ` Gregory CLEMENT
2015-07-25 14:54 ` [PATCH v2 0/3] Add DT support for netxbig LEDs Gregory CLEMENT
2015-07-25 19:36 ` Jacek Anaszewski
2015-07-25 20:45 ` Jacek Anaszewski
2015-07-28 10:30 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55913DDB.2000008@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).