[PATCH 08/18] ARM/ks8695/time: Migrate to new 'set-state' interface

[gerg@uclinux.org (Greg Ungerer)]

Hi Viresh,

On 06/07/15 20:54, Viresh Kumar wrote:
> Migrate ks8695 driver to the new 'set-state' interface provided by
> clockevents core, the earlier 'set-mode' interface is marked obsolete
> now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> There is nothing to be done for oneshot or shutdown states and so are
> not implemented.
>
> Cc: Greg Ungerer <gerg@uclinux.org>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Acked-by: Greg Ungerer <gerg@uclinux.org>

Regards
Greg



> ---
>   arch/arm/mach-ks8695/time.c | 43 +++++++++++++++++++++----------------------
>   1 file changed, 21 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
> index a197874bf382..18eb0fbd8d82 100644
> --- a/arch/arm/mach-ks8695/time.c
> +++ b/arch/arm/mach-ks8695/time.c
> @@ -54,28 +54,25 @@
>   /* Timer0 Timeout Counter Register */
>   #define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
>   
> -static void ks8695_set_mode(enum clock_event_mode mode,
> -			    struct clock_event_device *evt)
> +static int ks8695_set_periodic(struct clock_event_device *evt)
>   {
> +	u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
> +	u32 half = DIV_ROUND_CLOSEST(rate, 2);
>   	u32 tmcon;
>   
> -	if (mode == CLOCK_EVT_FEAT_PERIODIC) {
> -		u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
> -		u32 half = DIV_ROUND_CLOSEST(rate, 2);
> -
> -		/* Disable timer 1 */
> -		tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
> -		tmcon &= ~TMCON_T1EN;
> -		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> +	/* Disable timer 1 */
> +	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
> +	tmcon &= ~TMCON_T1EN;
> +	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
>   
> -		/* Both registers need to count down */
> -		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
> -		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
> +	/* Both registers need to count down */
> +	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
> +	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
>   
> -		/* Re-enable timer1 */
> -		tmcon |= TMCON_T1EN;
> -		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> -	}
> +	/* Re-enable timer1 */
> +	tmcon |= TMCON_T1EN;
> +	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> +	return 0;
>   }
>   
>   static int ks8695_set_next_event(unsigned long cycles,
> @@ -102,11 +99,13 @@ static int ks8695_set_next_event(unsigned long cycles,
>   }
>   
>   static struct clock_event_device clockevent_ks8695 = {
> -	.name		= "ks8695_t1tc",
> -	.rating		= 300, /* Reasonably fast and accurate clock event */
> -	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
> -	.set_next_event	= ks8695_set_next_event,
> -	.set_mode	= ks8695_set_mode,
> +	.name			= "ks8695_t1tc",
> +	/* Reasonably fast and accurate clock event */
> +	.rating			= 300,
> +	.features		= CLOCK_EVT_FEAT_ONESHOT |
> +				  CLOCK_EVT_FEAT_PERIODIC,
> +	.set_next_event		= ks8695_set_next_event,
> +	.set_state_periodic	= ks8695_set_periodic,
>   };
>   
>   /*