linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] KVM: arm: rename pause into power_off
Date: Tue, 07 Jul 2015 16:08:55 +0200	[thread overview]
Message-ID: <559BDD77.7050202@linaro.org> (raw)
In-Reply-To: <20150707133629.GF3381@hawk.localdomain>

Hi Andrew,
On 07/07/2015 03:36 PM, Andrew Jones wrote:
> On Mon, Jul 06, 2015 at 02:49:55PM +0200, Eric Auger wrote:
>> The kvm_vcpu_arch pause field is renamed into power_off to prepare
>> for the introduction of a new pause field.
>>
>> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>>
>> v4 -> v5:
>> - fix compilation issue on arm64 (add power_off field in kvm_host.h)
>> ---
>>  arch/arm/include/asm/kvm_host.h   |  4 ++--
>>  arch/arm/kvm/arm.c                | 10 +++++-----
>>  arch/arm/kvm/psci.c               | 10 +++++-----
>>  arch/arm64/include/asm/kvm_host.h |  4 ++--
>>  4 files changed, 14 insertions(+), 14 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
>> index e896d2c..304004d 100644
>> --- a/arch/arm/include/asm/kvm_host.h
>> +++ b/arch/arm/include/asm/kvm_host.h
>> @@ -129,8 +129,8 @@ struct kvm_vcpu_arch {
>>  	 * here.
>>  	 */
>>  
>> -	/* Don't run the guest on this vcpu */
>> -	bool pause;
> 
> This patch should leave pause in. kvm_arch_vcpu_ioctl_set_mpstate still
> references it, compilation is broken until the next patch comes.
Effectively that's definitively wrong.
> 
>> +	/* vcpu power-off state */
>> +	bool power_off;
>>  
>>  	/* IO related fields */
>>  	struct kvm_decode mmio_decode;
>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
>> index bcdf799..7537e68 100644
>> --- a/arch/arm/kvm/arm.c
>> +++ b/arch/arm/kvm/arm.c
>> @@ -475,7 +475,7 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
>>  {
>>  	wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
>>  
>> -	wait_event_interruptible(*wq, !vcpu->arch.pause);
>> +	wait_event_interruptible(*wq, !vcpu->arch.power_off);
> 
> Leaving pause in would allow this to already be
> 
> +       wait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
> +                                      (!vcpu->arch.pause)));
> 
> which feels better. The function name is vcpu_pause, so it's nice
> to see state named 'pause' in there.
agreed

Thanks for the review!

Eric
> 
>>  }
>>  
>>  static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
>> @@ -525,7 +525,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
>>  
>>  		update_vttbr(vcpu->kvm);
>>  
>> -		if (vcpu->arch.pause)
>> +		if (vcpu->arch.power_off)
>>  			vcpu_pause(vcpu);
>>  
>>  		/*
>> @@ -766,12 +766,12 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
>>  	vcpu_reset_hcr(vcpu);
>>  
>>  	/*
>> -	 * Handle the "start in power-off" case by marking the VCPU as paused.
>> +	 * Handle the "start in power-off" case.
>>  	 */
>>  	if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features))
>> -		vcpu->arch.pause = true;
>> +		vcpu->arch.power_off = true;
>>  	else
>> -		vcpu->arch.pause = false;
>> +		vcpu->arch.power_off = false;
>>  
>>  	return 0;
>>  }
>> diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
>> index 4b94b51..134971a 100644
>> --- a/arch/arm/kvm/psci.c
>> +++ b/arch/arm/kvm/psci.c
>> @@ -63,7 +63,7 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
>>  
>>  static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
>>  {
>> -	vcpu->arch.pause = true;
>> +	vcpu->arch.power_off = true;
>>  }
>>  
>>  static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
>> @@ -87,7 +87,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
>>  	 */
>>  	if (!vcpu)
>>  		return PSCI_RET_INVALID_PARAMS;
>> -	if (!vcpu->arch.pause) {
>> +	if (!vcpu->arch.power_off) {
>>  		if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
>>  			return PSCI_RET_ALREADY_ON;
>>  		else
>> @@ -115,7 +115,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
>>  	 * the general puspose registers are undefined upon CPU_ON.
>>  	 */
>>  	*vcpu_reg(vcpu, 0) = context_id;
>> -	vcpu->arch.pause = false;
>> +	vcpu->arch.power_off = false;
>>  	smp_mb();		/* Make sure the above is visible */
>>  
>>  	wq = kvm_arch_vcpu_wq(vcpu);
>> @@ -152,7 +152,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
>>  	kvm_for_each_vcpu(i, tmp, kvm) {
>>  		mpidr = kvm_vcpu_get_mpidr_aff(tmp);
>>  		if (((mpidr & target_affinity_mask) == target_affinity) &&
>> -		    !tmp->arch.pause) {
>> +		    !tmp->arch.power_off) {
>>  			return PSCI_0_2_AFFINITY_LEVEL_ON;
>>  		}
>>  	}
>> @@ -175,7 +175,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)
>>  	 * re-initialized.
>>  	 */
>>  	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
>> -		tmp->arch.pause = true;
>> +		tmp->arch.power_off = true;
>>  		kvm_vcpu_kick(tmp);
>>  	}
>>  
>> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
>> index 2709db2..009da6b 100644
>> --- a/arch/arm64/include/asm/kvm_host.h
>> +++ b/arch/arm64/include/asm/kvm_host.h
>> @@ -122,8 +122,8 @@ struct kvm_vcpu_arch {
>>  	 * here.
>>  	 */
>>  
>> -	/* Don't run the guest */
>> -	bool pause;
>> +	/* vcpu power-off state */
>> +	bool power_off;
>>  
>>  	/* IO related fields */
>>  	struct kvm_decode mmio_decode;
>> -- 
>> 1.9.1
> 
> Thanks,
> drew
> 

  reply	other threads:[~2015-07-07 14:08 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-06 12:49 [PATCH 0/2] KVM: arm/arm64: Guest synchronous halt/resume Eric Auger
2015-07-06 12:49 ` [PATCH 1/2] KVM: arm: rename pause into power_off Eric Auger
2015-07-07 13:36   ` Andrew Jones
2015-07-07 14:08     ` Eric Auger [this message]
2015-07-18  9:09   ` Christoffer Dall
2015-08-07 12:36     ` Eric Auger
2015-07-06 12:49 ` [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt,resume]_guest Eric Auger
2015-07-07 13:41   ` [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest Andrew Jones
2015-07-07 14:10     ` Eric Auger
2015-07-18  9:18   ` Christoffer Dall
2015-08-07 12:56     ` Eric Auger
2015-08-07 16:17     ` Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=559BDD77.7050202@linaro.org \
    --to=eric.auger@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).