linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] ARM: OMAP2+: Add support for initializing dm814x clocks
Date: Thu, 16 Jul 2015 11:25:06 -0700	[thread overview]
Message-ID: <55A7F702.6040408@codeaurora.org> (raw)
In-Reply-To: <20150716093746.GL17550@atomide.com>

On 07/16/2015 02:37 AM, Tony Lindgren wrote:
>
> Here's this patch updated with the above removed.
>

Ok. I fixed up Mike's email in case he wants to look at it. Looks fine 
to me though.

>
> 8< -------------
> From: Tony Lindgren <tony@atomide.com>
> Date: Thu, 16 Jul 2015 01:55:57 -0700
> Subject: [PATCH] ARM: OMAP2+: Add support for initializing dm814x clocks
>
> Let's add a minimal clocks for dm814x to get it booted. This is
> mostly a placeholder and relies on the PLLs being on from the
> bootloader.
>
> Note that the divider clocks work the same way as on dm816x and
> am335x.
>
> Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
> Cc: Mike Turquette <mturquette@linaro.org>
> Cc: Paul Walmsley <paul@pwsan.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Acked-by: Stephen Boyd <sboyd@codeaurora.org>

>
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -558,7 +558,7 @@ void __init ti814x_init_early(void)
>   	ti81xx_hwmod_init();
>   	omap_hwmod_init_postsetup();
>   	if (of_have_populated_dt())
> -		omap_clk_soc_init = ti81xx_dt_clk_init;
> +		omap_clk_soc_init = dm814x_dt_clk_init;
>   }
>   
>   void __init ti816x_init_early(void)
> @@ -575,7 +575,7 @@ void __init ti816x_init_early(void)
>   	ti81xx_hwmod_init();
>   	omap_hwmod_init_postsetup();
>   	if (of_have_populated_dt())
> -		omap_clk_soc_init = ti81xx_dt_clk_init;
> +		omap_clk_soc_init = dm816x_dt_clk_init;
>   }
>   #endif
>   
> --- a/drivers/clk/ti/Makefile
> +++ b/drivers/clk/ti/Makefile
> @@ -2,7 +2,7 @@ obj-y					+= clk.o autoidle.o clockdomain.o
>   clk-common				= dpll.o composite.o divider.o gate.o \
>   					  fixed-factor.o mux.o apll.o
>   obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o
> -obj-$(CONFIG_SOC_TI81XX)		+= $(clk-common) fapll.o clk-816x.o
> +obj-$(CONFIG_SOC_TI81XX)		+= $(clk-common) fapll.o clk-814x.o clk-816x.o
>   obj-$(CONFIG_ARCH_OMAP2)		+= $(clk-common) interface.o clk-2xxx.o
>   obj-$(CONFIG_ARCH_OMAP3)		+= $(clk-common) interface.o \
>   					   clk-3xxx.o
> --- /dev/null
> +++ b/drivers/clk/ti/clk-814x.c
> @@ -0,0 +1,31 @@
> +/*
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clk/ti.h>
> +
> +static struct ti_dt_clk dm814_clks[] = {
> +	DT_CLK(NULL, "devosc_ck", "devosc_ck"),
> +	DT_CLK(NULL, "mpu_ck", "mpu_ck"),
> +	DT_CLK(NULL, "sysclk4_ck", "sysclk4_ck"),
> +	DT_CLK(NULL, "sysclk6_ck", "sysclk6_ck"),
> +	DT_CLK(NULL, "sysclk10_ck", "sysclk10_ck"),
> +	DT_CLK(NULL, "sysclk18_ck", "sysclk18_ck"),
> +	DT_CLK(NULL, "timer_sys_ck", "devosc_ck"),
> +	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
> +	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
> +	{ .node_name = NULL },
> +};
> +
> +int __init dm814x_dt_clk_init(void)
> +{
> +	ti_dt_clocks_register(dm814_clks);
> +	omap2_clk_disable_autoidle_all();
> +	omap2_clk_enable_init_clocks(NULL, 0);
> +
> +	return 0;
> +}
> --- a/drivers/clk/ti/clk-816x.c
> +++ b/drivers/clk/ti/clk-816x.c
> @@ -42,7 +42,7 @@ static const char *enable_init_clks[] = {
>   	"ddr_pll_clk3",
>   };
>   
> -int __init ti81xx_dt_clk_init(void)
> +int __init dm816x_dt_clk_init(void)
>   {
>   	ti_dt_clocks_register(dm816x_clks);
>   	omap2_clk_disable_autoidle_all();
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -329,7 +329,8 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
>   int omap3430_dt_clk_init(void);
>   int omap3630_dt_clk_init(void);
>   int am35xx_dt_clk_init(void);
> -int ti81xx_dt_clk_init(void);
> +int dm814x_dt_clk_init(void);
> +int dm816x_dt_clk_init(void);
>   int omap4xxx_dt_clk_init(void);
>   int omap5xxx_dt_clk_init(void);
>   int dra7xx_dt_clk_init(void);


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2015-07-16 18:25 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-03 16:23 [PATCH 00/12] Minimal support for dm814x-evm and hp t410 thin client Tony Lindgren
2015-06-03 16:23 ` [PATCH 01/12] ARM: OMAP2+: Fix dm814x DT_MACHINE_START Tony Lindgren
2015-06-03 16:23 ` [PATCH 02/12] ARM: OMAP2+: Fix scrm compatible for dm814x Tony Lindgren
2015-06-03 19:08   ` Sergei Shtylyov
2015-06-03 19:38     ` Tony Lindgren
2015-07-16  9:11       ` Tony Lindgren
2015-06-03 16:23 ` [PATCH 03/12] ARM: OMAP2+: Add minimal clockdomains " Tony Lindgren
2015-06-03 16:23 ` [PATCH 04/12] ARM: OMAP2+: Add custom prwdm_operations for 81xx to support dm814x Tony Lindgren
2015-06-03 16:23 ` [PATCH 05/12] ARM: OMAP2+: Add support for initializing dm814x clocks Tony Lindgren
2015-06-04 18:42   ` Stephen Boyd
2015-06-04 22:28     ` Tony Lindgren
2015-07-16  9:37       ` Tony Lindgren
2015-07-16 18:25         ` Stephen Boyd [this message]
2015-07-17  5:06           ` Tony Lindgren
2015-06-03 16:23 ` [PATCH 06/12] ARM: OMAP2+: Prepare dm81xx hwmod code for adding minimal dm814x support Tony Lindgren
2015-06-03 16:23 ` [PATCH 07/12] ARM: OMAP2: Add minimal dm814x hwmod support Tony Lindgren
2015-06-03 16:23 ` [PATCH 08/12] ARM: dts: Add minimal dm814x support Tony Lindgren
2015-06-03 16:23 ` [PATCH 09/12] ARM: dts: Add minimal clocks for dm814x Tony Lindgren
2015-06-03 16:23 ` [PATCH 10/12] ARM: dts: Add minimal dts support for dm8148-evm Tony Lindgren
2015-06-03 16:23 ` [PATCH 11/12] ARM: dts: Add minimal support for HP T410 Tony Lindgren
2015-06-03 16:23 ` [PATCH 12/12] ARM: OMAP2+: Add custom abort handler for t410 Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55A7F702.6040408@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).