[PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers

[shannon.zhao@linaro.org (Shannon Zhao)]

On 2015/7/17 2:45, Christoffer Dall wrote:
> On Mon, Jul 06, 2015 at 10:17:33AM +0800, shannon.zhao at linaro.org wrote:
>> From: Shannon Zhao <shannon.zhao@linaro.org>
>>
>> We are about to trap and emulate acccesses to each PMU register
>> individually. This adds the context offsets for the AArch64 PMU
>> registers and their AArch32 counterparts.
>>
>> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
>> ---
>>  arch/arm64/include/asm/kvm_asm.h | 59 +++++++++++++++++++++++++++++++++++-----
>>  1 file changed, 52 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
>> index 3c5fe68..21b5d3b 100644
>> --- a/arch/arm64/include/asm/kvm_asm.h
>> +++ b/arch/arm64/include/asm/kvm_asm.h
>> @@ -56,14 +56,36 @@
>>  #define DBGWVR15_EL1	86
>>  #define MDCCINT_EL1	87	/* Monitor Debug Comms Channel Interrupt Enable Reg */
>>  
>> +/* Performance Monitors Registers */
>> +#define PMCR_EL0	88	/* Control Register */
>> +#define PMOVSSET_EL0	89	/* Overflow Flag Status Set Register */
>> +#define PMOVSCLR_EL0	90	/* Overflow Flag Status Clear Register */
>> +#define PMCCNTR_EL0	91	/* Cycle Counter Register */
>> +#define PMSELR_EL0	92	/* Event Counter Selection Register */
>> +#define PMCEID0_EL0	93	/* Common Event Identification Register 0 */
>> +#define PMCEID1_EL0	94	/* Common Event Identification Register 1 */
>> +#define PMEVCNTR0_EL0	95	/* Event Counter Register (0-30) */
> 
> why do we need these when we trap-and-emulate and we have the kvm_pmc
> structs? 
This just makes the guest work when accessing these registers.

> Is that because the kvm_pmc structs are only used when we
> actually have an active counter running and registered with perf?
> 

Right, the kvm_pmc structs are used to store the status of perf evnets,
like the event type, count number of this perf event.

On the other hand, the kernel perf codes will not directly access to the
PMEVCNTRx_EL0 and PMEVTYPERx_EL0 registers. It will firstly write the
index of select counter to PMSELR_EL0 and access to PMXEVCNTR_EL0 or
PMXEVTYPER_EL0. Then this is architecturally mapped to PMEVCNTRx_EL0 and
PMEVTYPERx_EL0.

>> +#define PMEVTYPER0_EL0	96	/* Event Type Register (0-30) */
>> +#define PMEVCNTR30_EL0	155
>> +#define PMEVTYPER30_EL0	156
>> +#define PMXEVCNTR_EL0	157	/* Selected Event Count Register */
>> +#define PMXEVTYPER_EL0	158	/* Selected Event Type Register */
>> +#define PMCNTENSET_EL0	159	/* Count Enable Set Register */
>> +#define PMCNTENCLR_EL0	160	/* Count Enable Clear Register */
>> +#define PMINTENSET_EL1	161	/* Interrupt Enable Set Register */
>> +#define PMINTENCLR_EL1	162	/* Interrupt Enable Clear Register */
>> +#define PMUSERENR_EL0	163	/* User Enable Register */
>> +#define PMCCFILTR_EL0	164	/* Cycle Count Filter Register */
>> +#define PMSWINC_EL0	165	/* Software Increment Register */
>> +
>>  /* 32bit specific registers. Keep them at the end of the range */
>> -#define	DACR32_EL2	88	/* Domain Access Control Register */
>> -#define	IFSR32_EL2	89	/* Instruction Fault Status Register */
>> -#define	FPEXC32_EL2	90	/* Floating-Point Exception Control Register */
>> -#define	DBGVCR32_EL2	91	/* Debug Vector Catch Register */
>> -#define	TEECR32_EL1	92	/* ThumbEE Configuration Register */
>> -#define	TEEHBR32_EL1	93	/* ThumbEE Handler Base Register */
>> -#define	NR_SYS_REGS	94
>> +#define	DACR32_EL2	166	/* Domain Access Control Register */
>> +#define	IFSR32_EL2	167	/* Instruction Fault Status Register */
>> +#define	FPEXC32_EL2	168	/* Floating-Point Exception Control Register */
>> +#define	DBGVCR32_EL2	169	/* Debug Vector Catch Register */
>> +#define	TEECR32_EL1	170	/* ThumbEE Configuration Register */
>> +#define	TEEHBR32_EL1	171	/* ThumbEE Handler Base Register */
>> +#define	NR_SYS_REGS	172
>>  
>>  /* 32bit mapping */
>>  #define c0_MPIDR	(MPIDR_EL1 * 2)	/* MultiProcessor ID Register */
>> @@ -85,6 +107,24 @@
>>  #define c6_IFAR		(c6_DFAR + 1)	/* Instruction Fault Address Register */
>>  #define c7_PAR		(PAR_EL1 * 2)	/* Physical Address Register */
>>  #define c7_PAR_high	(c7_PAR + 1)	/* PAR top 32 bits */
>> +
>> +/* Performance Monitors*/
>> +#define c9_PMCR		(PMCR_EL0 * 2)
>> +#define c9_PMOVSSET	(PMOVSSET_EL0 * 2)
>> +#define c9_PMOVSCLR	(PMOVSCLR_EL0 * 2)
>> +#define c9_PMCCNTR	(PMCCNTR_EL0 * 2)
>> +#define c9_PMSELR	(PMSELR_EL0 * 2)
>> +#define c9_PMCEID0	(PMCEID0_EL0 * 2)
>> +#define c9_PMCEID1	(PMCEID1_EL0 * 2)
>> +#define c9_PMXEVCNTR	(PMXEVCNTR_EL0 * 2)
>> +#define c9_PMXEVTYPER	(PMXEVTYPER_EL0 * 2)
>> +#define c9_PMCNTENSET	(PMCNTENSET_EL0 * 2)
>> +#define c9_PMCNTENCLR	(PMCNTENCLR_EL0 * 2)
>> +#define c9_PMINTENSET	(PMINTENSET_EL1 * 2)
>> +#define c9_PMINTENCLR	(PMINTENCLR_EL1 * 2)
>> +#define c9_PMUSERENR	(PMUSERENR_EL0 * 2)
>> +#define c9_PMSWINC	(PMSWINC_EL0 * 2)
>> +
>>  #define c10_PRRR	(MAIR_EL1 * 2)	/* Primary Region Remap Register */
>>  #define c10_NMRR	(c10_PRRR + 1)	/* Normal Memory Remap Register */
>>  #define c12_VBAR	(VBAR_EL1 * 2)	/* Vector Base Address Register */
>> @@ -96,6 +136,11 @@
>>  #define c10_AMAIR1	(c10_AMAIR0 + 1)/* Aux Memory Attr Indirection Reg */
>>  #define c14_CNTKCTL	(CNTKCTL_EL1 * 2) /* Timer Control Register (PL1) */
>>  
>> +/* Performance Monitors*/
>> +#define c14_PMEVCNTR0  (PMEVCNTR0_EL0 * 2)
>> +#define c14_PMEVTYPR0  (PMEVTYPER0_EL0 * 2)
>> +#define c14_PMCCFILTR  (PMCCFILTR_EL0 * 2)
>> +
>>  #define cp14_DBGDSCRext	(MDSCR_EL1 * 2)
>>  #define cp14_DBGBCR0	(DBGBCR0_EL1 * 2)
>>  #define cp14_DBGBVR0	(DBGBVR0_EL1 * 2)
>> -- 
>> 2.1.0
>>

-- 
Shannon