[PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx

[michal.simek@xilinx.com (Michal Simek)]

Hi Bjorn,

On 07/21/2015 05:40 PM, Bjorn Helgaas wrote:
> On Tue, Jul 07, 2015 at 05:54:19PM +0100, Russell Joyce wrote:
>> Occasionally both MSI and INTx bits in the interrupt decode register are
>> set at once by the Xilinx AXI PCIe Bridge, so the MSI flag in the
>> interrupt message should be checked to ensure that the correct handler is
>> used.
>>
>> If this check is not in place and the interrupt message type is MSI, the
>> INTx handler will be used erroneously when both type bits are set.
>> This will also be followed by a second read of the message FIFO, which can
>> result in the function returning early and the interrupt decode register
>> not being cleared if the FIFO is now empty.
>>
>> Signed-off-by: Russell Joyce <russell.joyce@york.ac.uk>
> 
> Applied to pci/host-xilinx for v4.3, thanks.
> 
> Xilinx guys, speak up if there's any issue with this.


I had 2 weeks off and still catching on emails. I will try to test this
and let you know if there is any problem.

Thanks,
Michal