* [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
@ 2015-06-16 13:30 Fabien Dessenne
2015-06-17 12:13 ` Maxime Coquelin
2015-07-22 13:08 ` Maxime Coquelin
0 siblings, 2 replies; 4+ messages in thread
From: Fabien Dessenne @ 2015-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
first of the two bdisp devices, defining register address, interrupt and
clock.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
---
arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 208b5e8..6f40bc9 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,6 +10,10 @@
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
+ aliases {
+ bdisp0 = &bdisp0;
+ };
+
soc {
usb2_picophy1: phy2 {
compatible = "st,stih407-usb2-phy";
@@ -218,5 +222,13 @@
};
};
};
+
+ bdisp0:bdisp at 9f10000 {
+ compatible = "st,stih407-bdisp";
+ reg = <0x9f10000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+ clock-names = "bdisp";
+ clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
2015-06-16 13:30 [PATCH] ARM: DT: STiH410: Add bdisp dt nodes Fabien Dessenne
@ 2015-06-17 12:13 ` Maxime Coquelin
2015-06-17 13:52 ` Fabien DESSENNE
2015-07-22 13:08 ` Maxime Coquelin
1 sibling, 1 reply; 4+ messages in thread
From: Maxime Coquelin @ 2015-06-17 12:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi Fabien,
On 06/16/2015 03:30 PM, Fabien Dessenne wrote:
> Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
> first of the two bdisp devices, defining register address, interrupt and
> clock.
>
> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> ---
> arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 208b5e8..6f40bc9 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -10,6 +10,10 @@
> #include "stih407-family.dtsi"
> #include "stih410-pinctrl.dtsi"
> / {
> + aliases {
> + bdisp0 = &bdisp0;
> + };
> +
> soc {
> usb2_picophy1: phy2 {
> compatible = "st,stih407-usb2-phy";
> @@ -218,5 +222,13 @@
> };
> };
> };
> +
> + bdisp0:bdisp at 9f10000 {
> + compatible = "st,stih407-bdisp";
> + reg = <0x9f10000 0x1000>;
> + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
> + clock-names = "bdisp";
> + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
> + };
Isn't the bdisp also present on STiH407 SoC?
If so, could you please move this node to stih407-family file?
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
2015-06-17 12:13 ` Maxime Coquelin
@ 2015-06-17 13:52 ` Fabien DESSENNE
0 siblings, 0 replies; 4+ messages in thread
From: Fabien DESSENNE @ 2015-06-17 13:52 UTC (permalink / raw)
To: linux-arm-kernel
Hi Maxime,
> -----Original Message-----
> From: Maxime COQUELIN
> Sent: mercredi 17 juin 2015 14:13
> To: Fabien DESSENNE; Srinivas Kandagatla; Patrice CHOTARD; Rob Herring;
> Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Russell King; linux-arm-
> kernel at lists.infradead.org; kernel at stlinux.com;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org
> Cc: Benjamin Gaignard
> Subject: Re: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
>
> Hi Fabien,
>
> On 06/16/2015 03:30 PM, Fabien Dessenne wrote:
> > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
> > first of the two bdisp devices, defining register address, interrupt
> > and clock.
> >
> > Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> > ---
> > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stih410.dtsi
> > b/arch/arm/boot/dts/stih410.dtsi index 208b5e8..6f40bc9 100644
> > --- a/arch/arm/boot/dts/stih410.dtsi
> > +++ b/arch/arm/boot/dts/stih410.dtsi
> > @@ -10,6 +10,10 @@
> > #include "stih407-family.dtsi"
> > #include "stih410-pinctrl.dtsi"
> > / {
> > + aliases {
> > + bdisp0 = &bdisp0;
> > + };
> > +
> > soc {
> > usb2_picophy1: phy2 {
> > compatible = "st,stih407-usb2-phy"; @@ -218,5
> +222,13 @@
> > };
> > };
> > };
> > +
> > + bdisp0:bdisp at 9f10000 {
> > + compatible = "st,stih407-bdisp";
> > + reg = <0x9f10000 0x1000>;
> > + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
> > + clock-names = "bdisp";
> > + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
> > + };
>
> Isn't the bdisp also present on STiH407 SoC?
> If so, could you please move this node to stih407-family file?
>
> Thanks,
> Maxime
For the time being, it is not planned to be supported on STiH407. Maybe one day...
Fabien
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
2015-06-16 13:30 [PATCH] ARM: DT: STiH410: Add bdisp dt nodes Fabien Dessenne
2015-06-17 12:13 ` Maxime Coquelin
@ 2015-07-22 13:08 ` Maxime Coquelin
1 sibling, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2015-07-22 13:08 UTC (permalink / raw)
To: linux-arm-kernel
Hi Fabien,
On 06/16/2015 03:30 PM, Fabien Dessenne wrote:
> Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
> first of the two bdisp devices, defining register address, interrupt and
> clock.
>
> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> ---
> arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
>
Patch applied to sti-dt-for-v4.3.
Thanks!
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-07-22 13:08 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-16 13:30 [PATCH] ARM: DT: STiH410: Add bdisp dt nodes Fabien Dessenne
2015-06-17 12:13 ` Maxime Coquelin
2015-06-17 13:52 ` Fabien DESSENNE
2015-07-22 13:08 ` Maxime Coquelin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).