linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sudeep.holla@arm.com (Sudeep Holla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno
Date: Wed, 22 Jul 2015 16:40:30 +0100	[thread overview]
Message-ID: <55AFB96E.1050406@arm.com> (raw)
In-Reply-To: <20150722132809.GG14923@e106497-lin.cambridge.arm.com>



On 22/07/15 14:28, Liviu Dudau wrote:
> On Mon, Jun 08, 2015 at 11:40:00AM +0100, Sudeep Holla wrote:
>> This patch adds support for the MHU mailbox peripheral used on Juno by
>> application processors to communicate with remote SCP handling most of
>> the CPU/system power management. It also adds the SRAM reserving the
>> shared memory and SCPI message protocol using that shared memory.
>>
>> Cc: Liviu Dudau <Liviu.Dudau@arm.com>
>> Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>> ---
>>   arch/arm64/boot/dts/arm/juno-base.dtsi   | 31 +++++++++++++++++++++++++++++++
>>   arch/arm64/boot/dts/arm/juno-clocks.dtsi | 23 +++++++++++++++++++++++
>>   2 files changed, 54 insertions(+)
>>

[..]

>> diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
>> index 25352ed943e6..64af7370815a 100644
>> --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
>> +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
>> @@ -42,3 +42,26 @@
>>   		clock-frequency = <400000000>;
>>   		clock-output-names = "faxi_clk";
>>   	};
>> +
>> +	scpi {
>> +		compatible = "arm,scpi";
>> +		mboxes = <&mailbox 1>;
>> +		shmem = <&cpu_scp_hpri>;
>> +
>> +		clocks {
>> +			compatible = "arm,scpi-clocks";
>> +
>> +			scpi_dvfs: scpi_clocks at 0 {
>> +				compatible = "arm,scpi-dvfs-clocks";
>> +				#clock-cells = <1>;
>> +				clock-indices = <0>, <1>, <2>;
>> +				clock-output-names = "vbig", "vlittle", "vgpu";
>> +			};
>> +			scpi_clk: scpi_clocks at 3 {
>> +				compatible = "arm,scpi-variable-clocks";
>> +				#clock-cells = <1>;
>> +				clock-indices = <3>, <4>;
>
> Subject to you addressing Mark's comments regarding the indices values (maybe choose
> a different property to show the fact that the index is actually an SCPI index
> rather than the clock's), you can add my
>

I don't understand why we need to do that. I will anyway follow up on
that thread.

> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>

Thanks for all the ACKs.

Regards,
Sudeep

  reply	other threads:[~2015-07-22 15:40 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-08 10:39 [PATCH v4 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol Sudeep Holla
2015-07-08 13:59   ` Sudeep Holla
2015-07-22  8:43   ` Liviu Dudau
2015-07-22  9:25     ` Sudeep Holla
2015-07-22  9:55   ` Mark Rutland
2015-07-22 15:56     ` Sudeep Holla
2015-07-22 16:23       ` Mark Rutland
2015-06-08 10:39 ` [PATCH v4 2/8] firmware: add support " Sudeep Holla
2015-06-11 11:54   ` Jassi Brar
2015-06-11 13:23     ` Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor) Sudeep Holla
2015-07-02 17:23   ` Stephen Boyd
2015-07-03 14:52     ` Sudeep Holla
2015-07-03 16:12       ` Sudeep Holla
2015-07-06 19:52       ` Stephen Boyd
2015-07-07 16:03         ` Sudeep Holla
2015-07-08  1:46           ` Stephen Boyd
2015-07-16 16:11             ` Sudeep Holla
2015-07-16 19:31               ` Stephen Boyd
2015-07-17 11:17                 ` Sudeep Holla
2015-07-17 18:13                   ` Stephen Boyd
2015-07-20  8:54                     ` Sudeep Holla
2015-07-21 18:05                       ` Stephen Boyd
2015-07-22 14:19                         ` Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 4/8] clk: scpi: add support for cpufreq virtual device Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 5/8] cpufreq: arm_big_little: add SCPI interface driver Sudeep Holla
2015-06-08 10:40 ` [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno Sudeep Holla
2015-06-08 13:51   ` Jon Medhurst (Tixy)
2015-06-08 14:32     ` Sudeep Holla
2015-06-08 14:35     ` Liviu Dudau
2015-07-22 13:28   ` Liviu Dudau
2015-07-22 15:40     ` Sudeep Holla [this message]
2015-07-22 16:06       ` Liviu Dudau
2015-07-22 16:16         ` Sudeep Holla
2015-06-08 10:40 ` [PATCH v4 7/8] arm64: dts: add CPU topology " Sudeep Holla
2015-07-22 13:31   ` Liviu Dudau
2015-06-08 10:40 ` [PATCH v4 8/8] arm64: dts: add clock support for all the cpus Sudeep Holla
2015-07-22 13:32   ` Liviu Dudau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55AFB96E.1050406@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).