linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: cyrille.pitchen@atmel.com (Cyrille Pitchen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
Date: Wed, 22 Jul 2015 18:25:20 +0200	[thread overview]
Message-ID: <55AFC3F0.5050002@atmel.com> (raw)
In-Reply-To: <201507221541.46135.marex@denx.de>

Hi Marek,

Le 22/07/2015 15:41, Marek Vasut a ?crit :
> On Wednesday, July 22, 2015 at 03:17:06 PM, Cyrille Pitchen wrote:
>> Once the Quad SPI mode has been enabled on a Micron flash memory, this
>> device expects ALL the following commands to use the SPI 4-4-4 protocol.
>> The (Q)SPI controller needs to be notified about the protocol change so it
>> can adapt and keep on dialoging with the Micron memory.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>> ---
>>  drivers/mtd/spi-nor/spi-nor.c | 17 +++++++++++++++++
>>  include/linux/mtd/spi-nor.h   | 13 +++++++++++++
>>  2 files changed, 30 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index d78831b4422b..93627d4e6be8 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -163,6 +163,18 @@ static inline int write_disable(struct spi_nor *nor)
>>  	return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0);
>>  }
>>
>> +/*
>> + * Notify the (Q)SPI controller about the new protocol to be used.
> 
> Hi!
> 
> Can you please just reword this a little, so that it is absolutelly clear
> even to the less bright of us (like me) that this is a notification coming
> from the upper layers (ie. the spi-nor framework) toward the hardware ?
> 
Sure, no problem! what about the following?

/*
 * Let the spi-nor framework notify lower layers, especially the driver of the
 * (Q)SPI controller, about the new protocol to be used. Indeed, once the
 * spi-nor framework has sent manufacturer specific commands to a memory to
 * enable its Quad SPI mode, it should immediately after tell the QSPI
 * controller to use the very same Quad SPI protocol as expected by the memory.
 */

>> + */
>> +static inline int spi_nor_set_protocol(struct spi_nor *nor,
>> +				       enum spi_protocol proto)
>> +{
>> +	if (nor->set_protocol)
>> +		return nor->set_protocol(nor, proto);
>> +
>> +	return 0;
>> +}
>> +
>>  static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
>>  {
>>  	return mtd->priv;
> 
> [...]
> 
> Best regards,
> Marek Vasut
> 
Best regards,

Cyrille

  reply	other threads:[~2015-07-22 16:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-22 13:17 [PATCH v2 0/5] add driver for Atmel QSPI controller Cyrille Pitchen
2015-07-22 13:17 ` [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change Cyrille Pitchen
2015-07-22 13:41   ` Marek Vasut
2015-07-22 16:25     ` Cyrille Pitchen [this message]
2015-07-23  7:00       ` Marek Vasut
2015-07-22 13:17 ` [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles Cyrille Pitchen
2015-07-22 13:43   ` Marek Vasut
2015-07-22 16:59     ` Cyrille Pitchen
2015-07-23  7:02       ` Marek Vasut
2015-07-22 13:17 ` [PATCH v2 3/5] mtd: spi-nor: allow to tune " Cyrille Pitchen
2015-07-22 13:17 ` [PATCH v2 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver Cyrille Pitchen
2015-07-22 13:17 ` [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller Cyrille Pitchen
2015-07-22 13:50   ` Marek Vasut
2015-07-27  8:41     ` Cyrille Pitchen
2015-07-27 10:53       ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55AFC3F0.5050002@atmel.com \
    --to=cyrille.pitchen@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).