From mboxrd@z Thu Jan 1 00:00:00 1970 From: nm@ti.com (Nishanth Menon) Date: Wed, 29 Jul 2015 14:37:44 -0500 Subject: [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node In-Reply-To: <1438168187-1614-13-git-send-email-kishon@ti.com> References: <1438168187-1614-1-git-send-email-kishon@ti.com> <1438168187-1614-13-git-send-email-kishon@ti.com> Message-ID: <55B92B88.1080409@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 07/29/2015 06:09 AM, Kishon Vijay Abraham I wrote: > For beagle x15, both the vdd and io lines are connected to the > same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3. > Remove it. > > Signed-off-by: Kishon Vijay Abraham I > --- > arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts > index a63bf78..d0db5c5 100644 > --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts > +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts > @@ -579,7 +579,6 @@ > pinctrl-0 = <&mmc1_pins_default>; > > vmmc-supply = <&ldo1_reg>; > - vmmc_aux-supply = <&vdd_3v3>; > pbias-supply = <&pbias_mmc_reg>; > bus-width = <4>; > cd-gpios = <&gpio6 27 0>; /* gpio 219 */ > Acked-by: Nishanth Menon -- Regards, Nishanth Menon