From mboxrd@z Thu Jan 1 00:00:00 1970 From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) Date: Wed, 05 Aug 2015 14:19:05 +0530 Subject: [PATCH-v2 1/2] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable In-Reply-To: <20150723155322.GU3436@x1> References: <1437495782-15767-1-git-send-email-vaibhav.hiremath@linaro.org> <1437495782-15767-2-git-send-email-vaibhav.hiremath@linaro.org> <20150723155322.GU3436@x1> Message-ID: <55C1CE01.7030607@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thursday 23 July 2015 09:23 PM, Lee Jones wrote: > On Tue, 21 Jul 2015, Vaibhav Hiremath wrote: > >> 88PM860 family of device supports dual phase mode on BUCK1 supply >> providing total 6A capacity. >> Note that by default they operate independently with 3A capacity. >> >> This patch updates the devicetree binding with DT property >> to enable dual-phase mode on BUCK1. >> >> Signed-off-by: Vaibhav Hiremath >> --- >> Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt >> index dec842f..2c82fcb 100644 >> --- a/Documentation/devicetree/bindings/mfd/88pm800.txt >> +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt >> @@ -9,6 +9,12 @@ Required parent device properties: >> - #interrupt-cells : should be 1. >> The cell is the 88pm80x local IRQ number >> >> +Optional properties : >> +- marvell,88pm860-buck1-dualphase-en : If set, enable dual phase on BUCK1, >> + providing 6A capacity. >> + Without this both BUCK1A and BUCK1B operates independently with 3A capacity. >> + (This property is only applicable to 88PM860) > > You need to get Mark Brown to Ack this. > Mark, Ay update on this patch? Thanks, Vaibhav