From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits
Date: Thu, 06 Aug 2015 13:46:31 +0100 [thread overview]
Message-ID: <55C35727.6060208@arm.com> (raw)
In-Reply-To: <20150806115436.GC4657@cbox>
Hi Christoffer,
On 06/08/15 12:54, Christoffer Dall wrote:
> On Wed, Aug 05, 2015 at 05:11:37PM +0100, Marc Zyngier wrote:
>> On 16/07/15 22:29, Mario Smarduch wrote:
>>> This patch only saves and restores FP/SIMD registers on Guest access. To do
>>> this cptr_el2 FP/SIMD trap is set on Guest entry and later checked on exit.
>>> lmbench, hackbench show significant improvements, for 30-50% exits FP/SIMD
>>> context is not saved/restored
>>>
>>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>>
>> So this patch seems to break 32bit guests on arm64. I've had a look,
>> squashed a few bugs that I dangerously overlooked during the review, but
>> it still doesn't work (it doesn't crash anymore, but I get random
>> illegal VFP instructions in 32bit guests).
>>
>> I'd be glad if someone could eyeball the following patch and tell me
>> what's going wrong. If we don't find the root cause quickly enough, I'll
>> have to drop the series from -next, and that'd be a real shame.
>>
>> Thanks,
>>
>> M.
>>
>> commit 5777dc55fbc170426a85e00c26002dd5a795cfa5
>> Author: Marc Zyngier <marc.zyngier@arm.com>
>> Date: Wed Aug 5 16:53:01 2015 +0100
>>
>> KVM: arm64: NOTAFIX: Prevent crash when 32bit guest uses VFP
>>
>> Since we switch FPSIMD in a lazy way, access to FPEXC32_EL2
>> must be guarded by skip_fpsimd_state. Otherwise, all hell
>> break loose.
>>
>> Also, FPEXC32_EL2 must be restored when we trap to EL2 to
>> enable floating point.
>>
>> Note that while it prevents the host from catching fire, the
>> guest still doesn't work properly, and I don't understand why just
>> yet.
>>
>> Not-really-signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
>>
>> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
>> index c8e0c70..b53ec5d 100644
>> --- a/arch/arm64/kvm/hyp.S
>> +++ b/arch/arm64/kvm/hyp.S
>> @@ -431,10 +431,12 @@
>> add x3, x2, #CPU_SYSREG_OFFSET(DACR32_EL2)
>> mrs x4, dacr32_el2
>> mrs x5, ifsr32_el2
>> - mrs x6, fpexc32_el2
>> stp x4, x5, [x3]
>> - str x6, [x3, #16]
>>
>> + skip_fpsimd_state x8, 3f
>> + mrs x6, fpexc32_el2
>> + str x6, [x3, #16]
>> +3:
>> skip_debug_state x8, 2f
>> mrs x7, dbgvcr32_el2
>> str x7, [x3, #24]
>> @@ -461,10 +463,8 @@
>>
>> add x3, x2, #CPU_SYSREG_OFFSET(DACR32_EL2)
>> ldp x4, x5, [x3]
>> - ldr x6, [x3, #16]
>> msr dacr32_el2, x4
>> msr ifsr32_el2, x5
>> - msr fpexc32_el2, x6
>>
>> skip_debug_state x8, 2f
>> ldr x7, [x3, #24]
>> @@ -669,12 +669,14 @@ __restore_debug:
>> ret
>>
>> __save_fpsimd:
>> + skip_fpsimd_state x3, 1f
>> save_fpsimd
>> - ret
>> +1: ret
>>
>> __restore_fpsimd:
>> + skip_fpsimd_state x3, 1f
>> restore_fpsimd
>> - ret
>> +1: ret
>>
>> switch_to_guest_fpsimd:
>> push x4, lr
>> @@ -682,6 +684,7 @@ switch_to_guest_fpsimd:
>> mrs x2, cptr_el2
>> bic x2, x2, #CPTR_EL2_TFP
>> msr cptr_el2, x2
>> + isb
>
> ah, EL2 accesses themselves trap too, ouch.
Yeah, the FP architecture has all kind of nasty tricks like this.
>>
>> mrs x0, tpidr_el2
>>
>> @@ -692,6 +695,10 @@ switch_to_guest_fpsimd:
>> add x2, x0, #VCPU_CONTEXT
>> bl __restore_fpsimd
>>
>> + skip_32bit_state x3, 1f
>> + ldr x4, [x2, #CPU_SYSREG_OFFSET(FPEXC32_EL2)]
>> + msr fpexc32_el2, x4
>> +1:
>
> wait, it looks like you're missing a store of the host fpsimd state in
> the switch_to_guest_fpsimd situation.
A store of FPEXC32_EL2 for the host? No, this register has no
significance whatsoever for a 64bit host. Its sole purpose is to
accommodate a 32bit guest (see D7.2.31). Or are you thinking of
something else?
> It think this would be easier to follow if the aarch32 FP registers were
> handled as part of the __save_fpsimd and __restore_fpsimd routines
> instead.
Maybe. This code needs some rework...
> Does this help anything?
Not really, sorry... :-(
> Otherwise, I assume you've tested thoroughly between something like
> v4.2-rc2 and this patch, so that you're sure we didn't have the 32-bit
> processed crash before?
Without the lazy switching, we seem to be rock solid. With lazy
switching, I get these illegal instructions, always on VFP ops. My
current thinking is that it has something to do with CPACR_EL1, and the
fact that the 32bit kernel turns it VFP on/off all the time.
/me puzzled...
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2015-08-06 12:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 21:29 [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits Mario Smarduch
2015-07-16 21:29 ` [PATCH v4 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore " Mario Smarduch
2015-08-05 16:11 ` Marc Zyngier
2015-08-06 11:54 ` Christoffer Dall
2015-08-06 12:46 ` Marc Zyngier [this message]
2015-08-19 17:49 ` Christoffer Dall
2015-08-19 21:52 ` Mario Smarduch
2015-08-19 22:28 ` Marc Zyngier
2015-08-19 23:21 ` Mario Smarduch
2015-07-16 21:29 ` [PATCH v4 2/2] arm: KVM: keep arm vfp/simd exit handling consistent with arm64 Mario Smarduch
2015-07-17 9:28 ` [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits Christoffer Dall
2015-07-17 10:28 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C35727.6060208@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).