[PATCH 02/74] clockevents/drivers/arm_global_timer: Migrate to new 'set-state' interface

[PATCH 02/74] clockevents/drivers/arm_global_timer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate arm_global_timer driver to the new 'set-state' interface
provided by the clockevents core, the earlier 'set-mode' interface is
marked obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/arm_global_timer.c | 37 ++++++++++++++++------------------
 1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
index e683377..29ea50a 100644
--- a/drivers/clocksource/arm_global_timer.c
+++ b/drivers/clocksource/arm_global_timer.c
@@ -107,26 +107,21 @@ static void gt_compare_set(unsigned long delta, int periodic)
 	writel(ctrl, gt_base + GT_CONTROL);
 }
 
-static void gt_clockevent_set_mode(enum clock_event_mode mode,
-				   struct clock_event_device *clk)
+static int gt_clockevent_shutdown(struct clock_event_device *evt)
 {
 	unsigned long ctrl;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl = readl(gt_base + GT_CONTROL);
-		ctrl &= ~(GT_CONTROL_COMP_ENABLE |
-				GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC);
-		writel(ctrl, gt_base + GT_CONTROL);
-		break;
-	default:
-		break;
-	}
+	ctrl = readl(gt_base + GT_CONTROL);
+	ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
+		  GT_CONTROL_AUTO_INC);
+	writel(ctrl, gt_base + GT_CONTROL);
+	return 0;
+}
+
+static int gt_clockevent_set_periodic(struct clock_event_device *evt)
+{
+	gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
+	return 0;
 }
 
 static int gt_clockevent_set_next_event(unsigned long evt,
@@ -155,7 +150,7 @@ static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
 	 *	the Global Timer flag _after_ having incremented
 	 *	the Comparator register	value to a higher value.
 	 */
-	if (evt->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(evt))
 		gt_compare_set(ULONG_MAX, 0);
 
 	writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);
@@ -171,7 +166,9 @@ static int gt_clockevents_init(struct clock_event_device *clk)
 	clk->name = "arm_global_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 		CLOCK_EVT_FEAT_PERCPU;
-	clk->set_mode = gt_clockevent_set_mode;
+	clk->set_state_shutdown = gt_clockevent_shutdown;
+	clk->set_state_periodic = gt_clockevent_set_periodic;
+	clk->set_state_oneshot = gt_clockevent_shutdown;
 	clk->set_next_event = gt_clockevent_set_next_event;
 	clk->cpumask = cpumask_of(cpu);
 	clk->rating = 300;
@@ -184,7 +181,7 @@ static int gt_clockevents_init(struct clock_event_device *clk)
 
 static void gt_clockevents_stop(struct clock_event_device *clk)
 {
-	gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+	gt_clockevent_shutdown(clk);
 	disable_percpu_irq(clk->irq);
 }
 
-- 
1.9.1

[PATCH 08/74] clockevents/drivers/exynos_mct: Remove unneeded container_of()

[Daniel Lezcano]

From: Alexey Klimov <klimov.linux@gmail.com>

Patch removes unneeded container_of() macro in exynos4_local_timer_setup().
Instead let's pass mevt pointer to setup and stop functions from
exynos4_mct_cpu_notify() and let them get evt pointer.

Tested on odroid-xu3.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 9064ff7..4d2330a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -442,13 +442,11 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int exynos4_local_timer_setup(struct clock_event_device *evt)
+static int exynos4_local_timer_setup(struct mct_clock_event_device *mevt)
 {
-	struct mct_clock_event_device *mevt;
+	struct clock_event_device *evt = &mevt->evt;
 	unsigned int cpu = smp_processor_id();
 
-	mevt = container_of(evt, struct mct_clock_event_device, evt);
-
 	mevt->base = EXYNOS4_MCT_L_BASE(cpu);
 	snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
 
@@ -477,8 +475,10 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
 	return 0;
 }
 
-static void exynos4_local_timer_stop(struct clock_event_device *evt)
+static void exynos4_local_timer_stop(struct mct_clock_event_device *mevt)
 {
+	struct clock_event_device *evt = &mevt->evt;
+
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI) {
 		if (evt->irq != -1)
@@ -500,11 +500,11 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self,
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_STARTING:
 		mevt = this_cpu_ptr(&percpu_mct_tick);
-		exynos4_local_timer_setup(&mevt->evt);
+		exynos4_local_timer_setup(mevt);
 		break;
 	case CPU_DYING:
 		mevt = this_cpu_ptr(&percpu_mct_tick);
-		exynos4_local_timer_stop(&mevt->evt);
+		exynos4_local_timer_stop(mevt);
 		break;
 	}
 
@@ -570,7 +570,7 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem
 		goto out_irq;
 
 	/* Immediately configure the timer on the boot CPU */
-	exynos4_local_timer_setup(&mevt->evt);
+	exynos4_local_timer_setup(mevt);
 	return;
 
 out_irq:
-- 
1.9.1

[PATCH 12/74] clockevents/drivers/cadence_ttc: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate cadence_ttc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>
---
 drivers/clocksource/cadence_ttc_timer.c | 59 ++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 27 deletions(-)

diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 510c8a1..e47e0e0 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -191,40 +191,42 @@ static int ttc_set_next_event(unsigned long cycles,
 }
 
 /**
- * ttc_set_mode - Sets the mode of timer
+ * ttc_set_{shutdown|oneshot|periodic} - Sets the state of timer
  *
- * @mode:	Mode to be set
  * @evt:	Address of clock event instance
  **/
-static void ttc_set_mode(enum clock_event_mode mode,
-					struct clock_event_device *evt)
+static int ttc_shutdown(struct clock_event_device *evt)
 {
 	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
 	struct ttc_timer *timer = &ttce->ttc;
 	u32 ctrl_reg;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ttc_set_interval(timer, DIV_ROUND_CLOSEST(ttce->ttc.freq,
-						PRESCALE * HZ));
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl_reg = readl_relaxed(timer->base_addr +
-					TTC_CNT_CNTRL_OFFSET);
-		ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
-		writel_relaxed(ctrl_reg,
-				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		ctrl_reg = readl_relaxed(timer->base_addr +
-					TTC_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
-		writel_relaxed(ctrl_reg,
-				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
-		break;
-	}
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	return 0;
+}
+
+static int ttc_set_periodic(struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+
+	ttc_set_interval(timer,
+			 DIV_ROUND_CLOSEST(ttce->ttc.freq, PRESCALE * HZ));
+	return 0;
+}
+
+static int ttc_resume(struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+	u32 ctrl_reg;
+
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	return 0;
 }
 
 static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
@@ -430,7 +432,10 @@ static void __init ttc_setup_clockevent(struct clk *clk,
 	ttcce->ce.name = "ttc_clockevent";
 	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ttcce->ce.set_next_event = ttc_set_next_event;
-	ttcce->ce.set_mode = ttc_set_mode;
+	ttcce->ce.set_state_shutdown = ttc_shutdown;
+	ttcce->ce.set_state_periodic = ttc_set_periodic;
+	ttcce->ce.set_state_oneshot = ttc_shutdown;
+	ttcce->ce.tick_resume = ttc_resume;
 	ttcce->ce.rating = 200;
 	ttcce->ce.irq = irq;
 	ttcce->ce.cpumask = cpu_possible_mask;
-- 
1.9.1

[PATCH 13/74] clockevents/drivers/clps711x: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate clps711x driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/clps711x-timer.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
index d83ec1f..cdd86e3 100644
--- a/drivers/clocksource/clps711x-timer.c
+++ b/drivers/clocksource/clps711x-timer.c
@@ -61,11 +61,6 @@ static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
-					 struct clock_event_device *evt)
-{
-}
-
 static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
 					unsigned int irq)
 {
@@ -91,7 +86,6 @@ static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
 	clkevt->name = "clps711x-clockevent";
 	clkevt->rating = 300;
 	clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
-	clkevt->set_mode = clps711x_clockevent_set_mode;
 	clkevt->cpumask = cpumask_of(0);
 	clockevents_config_and_register(clkevt, HZ, 0, 0);
 
-- 
1.9.1

[PATCH 18/74] clockevents/drivers/meson6: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate meson6 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Carlo Caione <carlo@caione.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Carlo Caione <carlo@caione.org>
---
 drivers/clocksource/meson6_timer.c | 50 ++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/meson6_timer.c b/drivers/clocksource/meson6_timer.c
index 5c15cba..1fa22c4 100644
--- a/drivers/clocksource/meson6_timer.c
+++ b/drivers/clocksource/meson6_timer.c
@@ -67,25 +67,25 @@ static void meson6_clkevt_time_start(unsigned char timer, bool periodic)
 	writel(val | TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
 }
 
-static void meson6_clkevt_mode(enum clock_event_mode mode,
-			       struct clock_event_device *clk)
+static int meson6_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		meson6_clkevt_time_stop(CED_ID);
-		meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC/HZ - 1);
-		meson6_clkevt_time_start(CED_ID, true);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		meson6_clkevt_time_stop(CED_ID);
-		meson6_clkevt_time_start(CED_ID, false);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		meson6_clkevt_time_stop(CED_ID);
-		break;
-	}
+	meson6_clkevt_time_stop(CED_ID);
+	return 0;
+}
+
+static int meson6_set_oneshot(struct clock_event_device *evt)
+{
+	meson6_clkevt_time_stop(CED_ID);
+	meson6_clkevt_time_start(CED_ID, false);
+	return 0;
+}
+
+static int meson6_set_periodic(struct clock_event_device *evt)
+{
+	meson6_clkevt_time_stop(CED_ID);
+	meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC / HZ - 1);
+	meson6_clkevt_time_start(CED_ID, true);
+	return 0;
 }
 
 static int meson6_clkevt_next_event(unsigned long evt,
@@ -99,11 +99,15 @@ static int meson6_clkevt_next_event(unsigned long evt,
 }
 
 static struct clock_event_device meson6_clockevent = {
-	.name		= "meson6_tick",
-	.rating		= 400,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= meson6_clkevt_mode,
-	.set_next_event	= meson6_clkevt_next_event,
+	.name			= "meson6_tick",
+	.rating			= 400,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= meson6_shutdown,
+	.set_state_periodic	= meson6_set_periodic,
+	.set_state_oneshot	= meson6_set_oneshot,
+	.tick_resume		= meson6_shutdown,
+	.set_next_event		= meson6_clkevt_next_event,
 };
 
 static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 22/74] clockevents/drivers/mtk: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate mtk driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/mtk_timer.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 68ab423..50f0641 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -102,27 +102,20 @@ static void mtk_clkevt_time_start(struct mtk_clock_event_device *evt,
 	       evt->gpt_base + TIMER_CTRL_REG(timer));
 }
 
-static void mtk_clkevt_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk)
+static int mtk_clkevt_shutdown(struct clock_event_device *clk)
+{
+	mtk_clkevt_time_stop(to_mtk_clk(clk), GPT_CLK_EVT);
+	return 0;
+}
+
+static int mtk_clkevt_set_periodic(struct clock_event_device *clk)
 {
 	struct mtk_clock_event_device *evt = to_mtk_clk(clk);
 
 	mtk_clkevt_time_stop(evt, GPT_CLK_EVT);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		mtk_clkevt_time_setup(evt, evt->ticks_per_jiffy, GPT_CLK_EVT);
-		mtk_clkevt_time_start(evt, true, GPT_CLK_EVT);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Timer is enabled in set_next_event */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		/* No more interrupts will occur as source is disabled */
-		break;
-	}
+	mtk_clkevt_time_setup(evt, evt->ticks_per_jiffy, GPT_CLK_EVT);
+	mtk_clkevt_time_start(evt, true, GPT_CLK_EVT);
+	return 0;
 }
 
 static int mtk_clkevt_next_event(unsigned long event,
@@ -196,7 +189,10 @@ static void __init mtk_timer_init(struct device_node *node)
 	evt->dev.name = "mtk_tick";
 	evt->dev.rating = 300;
 	evt->dev.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	evt->dev.set_mode = mtk_clkevt_mode;
+	evt->dev.set_state_shutdown = mtk_clkevt_shutdown;
+	evt->dev.set_state_periodic = mtk_clkevt_set_periodic;
+	evt->dev.set_state_oneshot = mtk_clkevt_shutdown;
+	evt->dev.tick_resume = mtk_clkevt_shutdown;
 	evt->dev.set_next_event = mtk_clkevt_next_event;
 	evt->dev.cpumask = cpu_possible_mask;
 
-- 
1.9.1

[PATCH 27/74] clockevents/drivers/rockchip: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate rockchip driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything for oneshot or resume modes, and so the
callbacks aren't provided.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/rockchip_timer.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/clocksource/rockchip_timer.c b/drivers/clocksource/rockchip_timer.c
index a35993b..bb2c2b0 100644
--- a/drivers/clocksource/rockchip_timer.c
+++ b/drivers/clocksource/rockchip_timer.c
@@ -82,23 +82,18 @@ static inline int rk_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static inline void rk_timer_set_mode(enum clock_event_mode mode,
-				     struct clock_event_device *ce)
+static int rk_timer_shutdown(struct clock_event_device *ce)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		rk_timer_disable(ce);
-		rk_timer_update_counter(rk_timer(ce)->freq / HZ - 1, ce);
-		rk_timer_enable(ce, TIMER_MODE_FREE_RUNNING);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		rk_timer_disable(ce);
-		break;
-	}
+	rk_timer_disable(ce);
+	return 0;
+}
+
+static int rk_timer_set_periodic(struct clock_event_device *ce)
+{
+	rk_timer_disable(ce);
+	rk_timer_update_counter(rk_timer(ce)->freq / HZ - 1, ce);
+	rk_timer_enable(ce, TIMER_MODE_FREE_RUNNING);
+	return 0;
 }
 
 static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
@@ -107,7 +102,7 @@ static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
 
 	rk_timer_interrupt_clear(ce);
 
-	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(ce))
 		rk_timer_disable(ce);
 
 	ce->event_handler(ce);
@@ -161,7 +156,8 @@ static void __init rk_timer_init(struct device_node *np)
 	ce->name = TIMER_NAME;
 	ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ce->set_next_event = rk_timer_set_next_event;
-	ce->set_mode = rk_timer_set_mode;
+	ce->set_state_shutdown = rk_timer_shutdown;
+	ce->set_state_periodic = rk_timer_set_periodic;
 	ce->irq = irq;
 	ce->cpumask = cpumask_of(0);
 	ce->rating = 250;
-- 
1.9.1

[PATCH 32/74] clockevents/drivers/sun4i: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sun4i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clocksource/sun4i_timer.c | 41 +++++++++++++++++++++------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 1928a89..6f3719d 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -81,25 +81,25 @@ static void sun4i_clkevt_time_start(u8 timer, bool periodic)
 	       timer_base + TIMER_CTL_REG(timer));
 }
 
-static void sun4i_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *clk)
+static int sun4i_clkevt_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		sun4i_clkevt_time_stop(0);
-		sun4i_clkevt_time_setup(0, ticks_per_jiffy);
-		sun4i_clkevt_time_start(0, true);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		sun4i_clkevt_time_stop(0);
-		sun4i_clkevt_time_start(0, false);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		sun4i_clkevt_time_stop(0);
-		break;
-	}
+	sun4i_clkevt_time_stop(0);
+	return 0;
+}
+
+static int sun4i_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+	sun4i_clkevt_time_stop(0);
+	sun4i_clkevt_time_start(0, false);
+	return 0;
+}
+
+static int sun4i_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	sun4i_clkevt_time_stop(0);
+	sun4i_clkevt_time_setup(0, ticks_per_jiffy);
+	sun4i_clkevt_time_start(0, true);
+	return 0;
 }
 
 static int sun4i_clkevt_next_event(unsigned long evt,
@@ -116,7 +116,10 @@ static struct clock_event_device sun4i_clockevent = {
 	.name = "sun4i_tick",
 	.rating = 350,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sun4i_clkevt_mode,
+	.set_state_shutdown = sun4i_clkevt_shutdown,
+	.set_state_periodic = sun4i_clkevt_set_periodic,
+	.set_state_oneshot = sun4i_clkevt_set_oneshot,
+	.tick_resume = sun4i_clkevt_shutdown,
 	.set_next_event = sun4i_clkevt_next_event,
 };
 
-- 
1.9.1

[PATCH 35/74] clockevents/drivers/efm32: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate efm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

There is nothing to be done for resume state and so isn't implemented.

Cc: Uwe Kleine-K?nig <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/time-efm32.c | 66 +++++++++++++++++++++-------------------
 1 file changed, 35 insertions(+), 31 deletions(-)

diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/time-efm32.c
index 5b6e3d5..b06e4c2 100644
--- a/drivers/clocksource/time-efm32.c
+++ b/drivers/clocksource/time-efm32.c
@@ -48,40 +48,42 @@ struct efm32_clock_event_ddata {
 	unsigned periodic_top;
 };
 
-static void efm32_clock_event_set_mode(enum clock_event_mode mode,
-				       struct clock_event_device *evtdev)
+static int efm32_clock_event_shutdown(struct clock_event_device *evtdev)
 {
 	struct efm32_clock_event_ddata *ddata =
 		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-		writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
-		writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-			       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-			       TIMERn_CTRL_MODE_DOWN,
-			       ddata->base + TIMERn_CTRL);
-		writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-		writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-			       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-			       TIMERn_CTRL_OSMEN |
-			       TIMERn_CTRL_MODE_DOWN,
-			       ddata->base + TIMERn_CTRL);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+	return 0;
+}
+
+static int efm32_clock_event_set_oneshot(struct clock_event_device *evtdev)
+{
+	struct efm32_clock_event_ddata *ddata =
+		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+		       TIMERn_CTRL_OSMEN |
+		       TIMERn_CTRL_MODE_DOWN,
+		       ddata->base + TIMERn_CTRL);
+	return 0;
+}
+
+static int efm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+{
+	struct efm32_clock_event_ddata *ddata =
+		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+	writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
+	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+		       TIMERn_CTRL_MODE_DOWN,
+		       ddata->base + TIMERn_CTRL);
+	writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
+	return 0;
 }
 
 static int efm32_clock_event_set_next_event(unsigned long evt,
@@ -112,7 +114,9 @@ static struct efm32_clock_event_ddata clock_event_ddata = {
 	.evtdev = {
 		.name = "efm32 clockevent",
 		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_mode = efm32_clock_event_set_mode,
+		.set_state_shutdown = efm32_clock_event_shutdown,
+		.set_state_periodic = efm32_clock_event_set_periodic,
+		.set_state_oneshot = efm32_clock_event_set_oneshot,
 		.set_next_event = efm32_clock_event_set_next_event,
 		.rating = 200,
 	},
-- 
1.9.1

[PATCH 37/74] clockevents/drivers/atlas7: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate atlas7 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-atlas7.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-atlas7.c b/drivers/clocksource/timer-atlas7.c
index 60f9de3..27fa136 100644
--- a/drivers/clocksource/timer-atlas7.c
+++ b/drivers/clocksource/timer-atlas7.c
@@ -76,7 +76,7 @@ static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
 	/* clear timer interrupt */
 	writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
 
-	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(ce))
 		sirfsoc_timer_count_disable(cpu);
 
 	ce->event_handler(ce);
@@ -117,18 +117,11 @@ static int sirfsoc_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *ce)
+/* Oneshot is enabled in set_next_event */
+static int sirfsoc_timer_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* enable in set_next_event */
-		break;
-	default:
-		break;
-	}
-
 	sirfsoc_timer_count_disable(smp_processor_id());
+	return 0;
 }
 
 static void sirfsoc_clocksource_suspend(struct clocksource *cs)
@@ -193,7 +186,9 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce)
 	ce->name = "local_timer";
 	ce->features = CLOCK_EVT_FEAT_ONESHOT;
 	ce->rating = 200;
-	ce->set_mode = sirfsoc_timer_set_mode;
+	ce->set_state_shutdown = sirfsoc_timer_shutdown;
+	ce->set_state_oneshot = sirfsoc_timer_shutdown;
+	ce->tick_resume = sirfsoc_timer_shutdown;
 	ce->set_next_event = sirfsoc_timer_set_next_event;
 	clockevents_calc_mult_shift(ce, atlas7_timer_rate, 60);
 	ce->max_delta_ns = clockevent_delta2ns(-2, ce);
-- 
1.9.1

[PATCH 40/74] clockevents/drivers/digicolor: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate digicolor driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/clocksource/timer-digicolor.c | 41 +++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-digicolor.c b/drivers/clocksource/timer-digicolor.c
index 7f8388c..e73947f0f 100644
--- a/drivers/clocksource/timer-digicolor.c
+++ b/drivers/clocksource/timer-digicolor.c
@@ -87,27 +87,27 @@ static inline void dc_timer_set_count(struct clock_event_device *ce,
 	writel(count, dt->base + COUNT(dt->timer_id));
 }
 
-static void digicolor_clkevt_mode(enum clock_event_mode mode,
-				  struct clock_event_device *ce)
+static int digicolor_clkevt_shutdown(struct clock_event_device *ce)
+{
+	dc_timer_disable(ce);
+	return 0;
+}
+
+static int digicolor_clkevt_set_oneshot(struct clock_event_device *ce)
+{
+	dc_timer_disable(ce);
+	dc_timer_enable(ce, CONTROL_MODE_ONESHOT);
+	return 0;
+}
+
+static int digicolor_clkevt_set_periodic(struct clock_event_device *ce)
 {
 	struct digicolor_timer *dt = dc_timer(ce);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		dc_timer_disable(ce);
-		dc_timer_set_count(ce, dt->ticks_per_jiffy);
-		dc_timer_enable(ce, CONTROL_MODE_PERIODIC);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		dc_timer_disable(ce);
-		dc_timer_enable(ce, CONTROL_MODE_ONESHOT);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		dc_timer_disable(ce);
-		break;
-	}
+	dc_timer_disable(ce);
+	dc_timer_set_count(ce, dt->ticks_per_jiffy);
+	dc_timer_enable(ce, CONTROL_MODE_PERIODIC);
+	return 0;
 }
 
 static int digicolor_clkevt_next_event(unsigned long evt,
@@ -125,7 +125,10 @@ static struct digicolor_timer dc_timer_dev = {
 		.name = "digicolor_tick",
 		.rating = 340,
 		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-		.set_mode = digicolor_clkevt_mode,
+		.set_state_shutdown = digicolor_clkevt_shutdown,
+		.set_state_periodic = digicolor_clkevt_set_periodic,
+		.set_state_oneshot = digicolor_clkevt_set_oneshot,
+		.tick_resume = digicolor_clkevt_shutdown,
 		.set_next_event = digicolor_clkevt_next_event,
 	},
 	.timer_id = TIMER_C,
-- 
1.9.1

[PATCH 42/74] clockevents/drivers/keystone: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate keystone driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also pass the mode-mask to keystone_timer_config() instead of the mode
as mode macro's aren't valid anymore.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-keystone.c | 44 +++++++++++++-----------------------
 1 file changed, 16 insertions(+), 28 deletions(-)

diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
index 0250354..edacf39 100644
--- a/drivers/clocksource/timer-keystone.c
+++ b/drivers/clocksource/timer-keystone.c
@@ -72,10 +72,10 @@ static inline void keystone_timer_barrier(void)
 
 /**
  * keystone_timer_config: configures timer to work in oneshot/periodic modes.
- * @ mode: mode to configure
+ * @ mask: mask of the mode to configure
  * @ period: cycles number to configure for
  */
-static int keystone_timer_config(u64 period, enum clock_event_mode mode)
+static int keystone_timer_config(u64 period, int mask)
 {
 	u32 tcr;
 	u32 off;
@@ -84,16 +84,7 @@ static int keystone_timer_config(u64 period, enum clock_event_mode mode)
 	off = tcr & ~(TCR_ENAMODE_MASK);
 
 	/* set enable mode */
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		tcr |= TCR_ENAMODE_ONESHOT_MASK;
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-		tcr |= TCR_ENAMODE_PERIODIC_MASK;
-		break;
-	default:
-		return -1;
-	}
+	tcr |= mask;
 
 	/* disable timer */
 	keystone_timer_writel(off, TCR);
@@ -138,24 +129,19 @@ static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
 static int keystone_set_next_event(unsigned long cycles,
 				  struct clock_event_device *evt)
 {
-	return keystone_timer_config(cycles, evt->mode);
+	return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK);
 }
 
-static void keystone_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *evt)
+static int keystone_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		keystone_timer_config(timer.hz_period, CLOCK_EVT_MODE_PERIODIC);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_ONESHOT:
-		keystone_timer_disable();
-		break;
-	default:
-		break;
-	}
+	keystone_timer_disable();
+	return 0;
+}
+
+static int keystone_set_periodic(struct clock_event_device *evt)
+{
+	keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK);
+	return 0;
 }
 
 static void __init keystone_timer_init(struct device_node *np)
@@ -222,7 +208,9 @@ static void __init keystone_timer_init(struct device_node *np)
 	/* setup clockevent */
 	event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	event_dev->set_next_event = keystone_set_next_event;
-	event_dev->set_mode = keystone_set_mode;
+	event_dev->set_state_shutdown = keystone_shutdown;
+	event_dev->set_state_periodic = keystone_set_periodic;
+	event_dev->set_state_oneshot = keystone_shutdown;
 	event_dev->cpumask = cpu_all_mask;
 	event_dev->owner = THIS_MODULE;
 	event_dev->name = TIMER_NAME;
-- 
1.9.1

[PATCH 43/74] clockevents/drivers/prima2: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate prima2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-prima2.c | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index ce18d57..78de982 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -104,26 +104,21 @@ static int sirfsoc_timer_set_next_event(unsigned long delta,
 	return next - now > delta ? -ETIME : 0;
 }
 
-static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *ce)
+static int sirfsoc_timer_shutdown(struct clock_event_device *evt)
 {
 	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		WARN_ON(1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(val | BIT(0),
-			sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel_relaxed(val & ~BIT(0),
-			sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+
+	writel_relaxed(val & ~BIT(0),
+		       sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+	return 0;
+}
+
+static int sirfsoc_timer_set_oneshot(struct clock_event_device *evt)
+{
+	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+
+	writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+	return 0;
 }
 
 static void sirfsoc_clocksource_suspend(struct clocksource *cs)
@@ -157,7 +152,8 @@ static struct clock_event_device sirfsoc_clockevent = {
 	.name = "sirfsoc_clockevent",
 	.rating = 200,
 	.features = CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sirfsoc_timer_set_mode,
+	.set_state_shutdown = sirfsoc_timer_shutdown,
+	.set_state_oneshot = sirfsoc_timer_set_oneshot,
 	.set_next_event = sirfsoc_timer_set_next_event,
 };
 
-- 
1.9.1

[PATCH 44/74] clockevents/drivers/stm32: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate stm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
 drivers/clocksource/timer-stm32.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index a97e8b5..f3dcb76 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -40,24 +40,25 @@ struct stm32_clock_event_ddata {
 	void __iomem *base;
 };
 
-static void stm32_clock_event_set_mode(enum clock_event_mode mode,
-				       struct clock_event_device *evtdev)
+static int stm32_clock_event_shutdown(struct clock_event_device *evtdev)
 {
 	struct stm32_clock_event_ddata *data =
 		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
 	void *base = data->base;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel_relaxed(data->periodic_top, base + TIM_ARR);
-		writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
-		break;
+	writel_relaxed(0, base + TIM_CR1);
+	return 0;
+}
 
-	case CLOCK_EVT_MODE_ONESHOT:
-	default:
-		writel_relaxed(0, base + TIM_CR1);
-		break;
-	}
+static int stm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+{
+	struct stm32_clock_event_ddata *data =
+		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+	void *base = data->base;
+
+	writel_relaxed(data->periodic_top, base + TIM_ARR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
+	return 0;
 }
 
 static int stm32_clock_event_set_next_event(unsigned long evt,
@@ -88,7 +89,10 @@ static struct stm32_clock_event_ddata clock_event_ddata = {
 	.evtdev = {
 		.name = "stm32 clockevent",
 		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_mode = stm32_clock_event_set_mode,
+		.set_state_shutdown = stm32_clock_event_shutdown,
+		.set_state_periodic = stm32_clock_event_set_periodic,
+		.set_state_oneshot = stm32_clock_event_shutdown,
+		.tick_resume = stm32_clock_event_shutdown,
 		.set_next_event = stm32_clock_event_set_next_event,
 		.rating = 200,
 	},
-- 
1.9.1

[PATCH 45/74] clockevents/drivers/sun5i: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sun5i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clocksource/timer-sun5i.c | 45 ++++++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 0ffb4ea..bca9573 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -103,27 +103,31 @@ static void sun5i_clkevt_time_start(struct sun5i_timer_clkevt *ce, u8 timer, boo
 	       ce->timer.base + TIMER_CTL_REG(timer));
 }
 
-static void sun5i_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *clkevt)
+static int sun5i_clkevt_shutdown(struct clock_event_device *clkevt)
 {
 	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		sun5i_clkevt_time_stop(ce, 0);
-		sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy);
-		sun5i_clkevt_time_start(ce, 0, true);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		sun5i_clkevt_time_stop(ce, 0);
-		sun5i_clkevt_time_start(ce, 0, false);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		sun5i_clkevt_time_stop(ce, 0);
-		break;
-	}
+	sun5i_clkevt_time_stop(ce, 0);
+	return 0;
+}
+
+static int sun5i_clkevt_set_oneshot(struct clock_event_device *clkevt)
+{
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
+	sun5i_clkevt_time_stop(ce, 0);
+	sun5i_clkevt_time_start(ce, 0, false);
+	return 0;
+}
+
+static int sun5i_clkevt_set_periodic(struct clock_event_device *clkevt)
+{
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
+	sun5i_clkevt_time_stop(ce, 0);
+	sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy);
+	sun5i_clkevt_time_start(ce, 0, true);
+	return 0;
 }
 
 static int sun5i_clkevt_next_event(unsigned long evt,
@@ -286,7 +290,10 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	ce->clkevt.name = node->name;
 	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ce->clkevt.set_next_event = sun5i_clkevt_next_event;
-	ce->clkevt.set_mode = sun5i_clkevt_mode;
+	ce->clkevt.set_state_shutdown = sun5i_clkevt_shutdown;
+	ce->clkevt.set_state_periodic = sun5i_clkevt_set_periodic;
+	ce->clkevt.set_state_oneshot = sun5i_clkevt_set_oneshot;
+	ce->clkevt.tick_resume = sun5i_clkevt_shutdown;
 	ce->clkevt.rating = 340;
 	ce->clkevt.irq = irq;
 	ce->clkevt.cpumask = cpu_possible_mask;
-- 
1.9.1

[PATCH 46/74] clockevents/drivers/u300: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate u300 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/clocksource/timer-u300.c | 155 +++++++++++++++++++--------------------
 1 file changed, 77 insertions(+), 78 deletions(-)

diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
index 5dcf756..1744b24 100644
--- a/drivers/clocksource/timer-u300.c
+++ b/drivers/clocksource/timer-u300.c
@@ -187,85 +187,82 @@ struct u300_clockevent_data {
 	unsigned ticks_per_jiffy;
 };
 
+static int u300_shutdown(struct clock_event_device *evt)
+{
+	/* Disable interrupts on GP1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_DGPT1);
+	return 0;
+}
+
 /*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
+ * If we have oneshot timer active, the oneshot scheduling function
  * u300_set_next_event() is called immediately after.
  */
-static void u300_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
+static int u300_set_oneshot(struct clock_event_device *evt)
+{
+	/* Just return; here? */
+	/*
+	 * The actual event will be programmed by the next event hook,
+	 * so we just set a dummy value somewhere at the end of the
+	 * universe here.
+	 */
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_DGPT1);
+	/*
+	 * Expire far in the future, u300_set_next_event() will be
+	 * called soon...
+	 */
+	writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
+	/* We run one shot per tick here! */
+	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+	       u300_timer_base + U300_TIMER_APP_SGPT1M);
+	/* Enable interrupts for this timer */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Enable timer */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_EGPT1);
+	return 0;
+}
+
+static int u300_set_periodic(struct clock_event_device *evt)
 {
 	struct u300_clockevent_data *cevdata =
 		container_of(evt, struct u300_clockevent_data, cevd);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Set the periodic mode to a certain number of ticks per
-		 * jiffy.
-		 */
-		writel(cevdata->ticks_per_jiffy,
-		       u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/*
-		 * Set continuous mode, so the timer keeps triggering
-		 * interrupts.
-		 */
-		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable timer interrupts */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Then enable the OS timer again */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Just break; here? */
-		/*
-		 * The actual event will be programmed by the next event hook,
-		 * so we just set a dummy value somewhere at the end of the
-		 * universe here.
-		 */
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Expire far in the future, u300_set_next_event() will be
-		 * called soon...
-		 */
-		writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/* We run one shot per tick here! */
-		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable interrupts for this timer */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Enable timer */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* Disable interrupts on GP1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Ignore this call */
-		break;
-	}
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_DGPT1);
+	/*
+	 * Set the periodic mode to a certain number of ticks per
+	 * jiffy.
+	 */
+	writel(cevdata->ticks_per_jiffy,
+	       u300_timer_base + U300_TIMER_APP_GPT1TC);
+	/*
+	 * Set continuous mode, so the timer keeps triggering
+	 * interrupts.
+	 */
+	writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+	       u300_timer_base + U300_TIMER_APP_SGPT1M);
+	/* Enable timer interrupts */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Then enable the OS timer again */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_EGPT1);
+	return 0;
 }
 
 /*
@@ -309,13 +306,15 @@ static int u300_set_next_event(unsigned long cycles,
 static struct u300_clockevent_data u300_clockevent_data = {
 	/* Use general purpose timer 1 as clock event */
 	.cevd = {
-		.name		= "GPT1",
+		.name			= "GPT1",
 		/* Reasonably fast and accurate clock event */
-		.rating		= 300,
-		.features	= CLOCK_EVT_FEAT_PERIODIC |
-			CLOCK_EVT_FEAT_ONESHOT,
-		.set_next_event	= u300_set_next_event,
-		.set_mode	= u300_set_mode,
+		.rating			= 300,
+		.features		= CLOCK_EVT_FEAT_PERIODIC |
+					  CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event		= u300_set_next_event,
+		.set_state_shutdown	= u300_shutdown,
+		.set_state_periodic	= u300_set_periodic,
+		.set_state_oneshot	= u300_set_oneshot,
 	},
 };
 
-- 
1.9.1

[PATCH 48/74] clockevents/drivers/vt8500: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate vt8500 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/vt8500_timer.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 1098ed3..a92e94b 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -88,29 +88,20 @@ static int vt8500_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void vt8500_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
+static int vt8500_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel(readl(regbase + TIMER_CTRL_VAL) | 1,
-			regbase + TIMER_CTRL_VAL);
-		writel(0, regbase + TIMER_IER_VAL);
-		break;
-	}
+	writel(readl(regbase + TIMER_CTRL_VAL) | 1, regbase + TIMER_CTRL_VAL);
+	writel(0, regbase + TIMER_IER_VAL);
+	return 0;
 }
 
 static struct clock_event_device clockevent = {
-	.name           = "vt8500_timer",
-	.features       = CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.set_next_event = vt8500_timer_set_next_event,
-	.set_mode       = vt8500_timer_set_mode,
+	.name			= "vt8500_timer",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= vt8500_timer_set_next_event,
+	.set_state_shutdown	= vt8500_shutdown,
+	.set_state_oneshot	= vt8500_shutdown,
 };
 
 static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 50/74] clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate tcb_clksrc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/tcb_clksrc.c | 93 ++++++++++++++++++++++------------------
 1 file changed, 51 insertions(+), 42 deletions(-)

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 8bdbc45..d28d2fe 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -91,55 +91,62 @@ static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
  */
 static u32 timer_clock;
 
-static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
+static int tc_shutdown(struct clock_event_device *d)
 {
 	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
 	void __iomem		*regs = tcd->regs;
 
-	if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
-			|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
-		__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
-		__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
-		clk_disable(tcd->clk);
-	}
+	__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
+	__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
+	clk_disable(tcd->clk);
 
-	switch (m) {
+	return 0;
+}
 
-	/* By not making the gentime core emulate periodic mode on top
-	 * of oneshot, we get lower overhead and improved accuracy.
-	 */
-	case CLOCK_EVT_MODE_PERIODIC:
-		clk_enable(tcd->clk);
+static int tc_set_oneshot(struct clock_event_device *d)
+{
+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+	void __iomem		*regs = tcd->regs;
 
-		/* slow clock, count up to RC, then irq and restart */
-		__raw_writel(timer_clock
-				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-				regs + ATMEL_TC_REG(2, CMR));
-		__raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+	if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+		tc_shutdown(d);
 
-		/* Enable clock and interrupts on RC compare */
-		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+	clk_enable(tcd->clk);
 
-		/* go go gadget! */
-		__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
-				regs + ATMEL_TC_REG(2, CCR));
-		break;
+	/* slow clock, count up to RC, then irq and stop */
+	__raw_writel(timer_clock | ATMEL_TC_CPCSTOP | ATMEL_TC_WAVE |
+		     ATMEL_TC_WAVESEL_UP_AUTO, regs + ATMEL_TC_REG(2, CMR));
+	__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
 
-	case CLOCK_EVT_MODE_ONESHOT:
-		clk_enable(tcd->clk);
+	/* set_next_event() configures and starts the timer */
+	return 0;
+}
 
-		/* slow clock, count up to RC, then irq and stop */
-		__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
-				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-				regs + ATMEL_TC_REG(2, CMR));
-		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+static int tc_set_periodic(struct clock_event_device *d)
+{
+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+	void __iomem		*regs = tcd->regs;
 
-		/* set_next_event() configures and starts the timer */
-		break;
+	if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+		tc_shutdown(d);
 
-	default:
-		break;
-	}
+	/* By not making the gentime core emulate periodic mode on top
+	 * of oneshot, we get lower overhead and improved accuracy.
+	 */
+	clk_enable(tcd->clk);
+
+	/* slow clock, count up to RC, then irq and restart */
+	__raw_writel(timer_clock | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+		     regs + ATMEL_TC_REG(2, CMR));
+	__raw_writel((32768 + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+
+	/* Enable clock and interrupts on RC compare */
+	__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+	/* go go gadget! */
+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, regs +
+		     ATMEL_TC_REG(2, CCR));
+	return 0;
 }
 
 static int tc_next_event(unsigned long delta, struct clock_event_device *d)
@@ -154,13 +161,15 @@ static int tc_next_event(unsigned long delta, struct clock_event_device *d)
 
 static struct tc_clkevt_device clkevt = {
 	.clkevt	= {
-		.name		= "tc_clkevt",
-		.features	= CLOCK_EVT_FEAT_PERIODIC
-					| CLOCK_EVT_FEAT_ONESHOT,
+		.name			= "tc_clkevt",
+		.features		= CLOCK_EVT_FEAT_PERIODIC |
+					  CLOCK_EVT_FEAT_ONESHOT,
 		/* Should be lower than at91rm9200's system timer */
-		.rating		= 125,
-		.set_next_event	= tc_next_event,
-		.set_mode	= tc_mode,
+		.rating			= 125,
+		.set_next_event		= tc_next_event,
+		.set_state_shutdown	= tc_shutdown,
+		.set_state_periodic	= tc_set_periodic,
+		.set_state_oneshot	= tc_set_oneshot,
 	},
 };
 
-- 
1.9.1

[PATCH 51/74] clockevents/drivers/exynos_mct: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate exynos_mct driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/exynos_mct.c | 85 +++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 45 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 4d2330a..029f96a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -257,15 +257,14 @@ static void exynos4_mct_comp0_stop(void)
 	exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
 }
 
-static void exynos4_mct_comp0_start(enum clock_event_mode mode,
-				    unsigned long cycles)
+static void exynos4_mct_comp0_start(bool periodic, unsigned long cycles)
 {
 	unsigned int tcon;
 	cycle_t comp_cycle;
 
 	tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
 
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+	if (periodic) {
 		tcon |= MCT_G_TCON_COMP0_AUTO_INC;
 		exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
 	}
@@ -283,38 +282,38 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
 static int exynos4_comp_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
-	exynos4_mct_comp0_start(evt->mode, cycles);
+	exynos4_mct_comp0_start(false, cycles);
 
 	return 0;
 }
 
-static void exynos4_comp_set_mode(enum clock_event_mode mode,
-				  struct clock_event_device *evt)
+static int mct_set_state_shutdown(struct clock_event_device *evt)
 {
-	unsigned long cycles_per_jiffy;
 	exynos4_mct_comp0_stop();
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_jiffy =
-			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
-		exynos4_mct_comp0_start(mode, cycles_per_jiffy);
-		break;
+static int mct_set_state_periodic(struct clock_event_device *evt)
+{
+	unsigned long cycles_per_jiffy;
 
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
+			    >> evt->shift);
+	exynos4_mct_comp0_stop();
+	exynos4_mct_comp0_start(true, cycles_per_jiffy);
+	return 0;
 }
 
 static struct clock_event_device mct_comp_device = {
-	.name		= "mct-comp",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 250,
-	.set_next_event	= exynos4_comp_set_next_event,
-	.set_mode	= exynos4_comp_set_mode,
+	.name			= "mct-comp",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 250,
+	.set_next_event		= exynos4_comp_set_next_event,
+	.set_state_periodic	= mct_set_state_periodic,
+	.set_state_shutdown	= mct_set_state_shutdown,
+	.set_state_oneshot	= mct_set_state_shutdown,
+	.tick_resume		= mct_set_state_shutdown,
 };
 
 static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
@@ -390,39 +389,32 @@ static int exynos4_tick_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
-					 struct clock_event_device *evt)
+static int set_state_shutdown(struct clock_event_device *evt)
+{
+	exynos4_mct_tick_stop(this_cpu_ptr(&percpu_mct_tick));
+	return 0;
+}
+
+static int set_state_periodic(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
 	unsigned long cycles_per_jiffy;
 
+	cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
+			    >> evt->shift);
 	exynos4_mct_tick_stop(mevt);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_jiffy =
-			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
-		exynos4_mct_tick_start(cycles_per_jiffy, mevt);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	exynos4_mct_tick_start(cycles_per_jiffy, mevt);
+	return 0;
 }
 
 static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
-	struct clock_event_device *evt = &mevt->evt;
-
 	/*
 	 * This is for supporting oneshot mode.
 	 * Mct would generate interrupt periodically
 	 * without explicit stopping.
 	 */
-	if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+	if (!clockevent_state_periodic(&mevt->evt))
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
@@ -453,7 +445,10 @@ static int exynos4_local_timer_setup(struct mct_clock_event_device *mevt)
 	evt->name = mevt->name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
-	evt->set_mode = exynos4_tick_set_mode;
+	evt->set_state_periodic = set_state_periodic;
+	evt->set_state_shutdown = set_state_shutdown;
+	evt->set_state_oneshot = set_state_shutdown;
+	evt->tick_resume = set_state_shutdown;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 450;
 
@@ -479,7 +474,7 @@ static void exynos4_local_timer_stop(struct mct_clock_event_device *mevt)
 {
 	struct clock_event_device *evt = &mevt->evt;
 
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	evt->set_state_shutdown(evt);
 	if (mct_int_type == MCT_INT_SPI) {
 		if (evt->irq != -1)
 			disable_irq_nosync(evt->irq);
-- 
1.9.1

[PATCH 42/74] clockevents/drivers/keystone: Migrate to new 'set-state' interface

[santosh.shilimkar at oracle.com]

On 8/10/15 2:51 AM, Daniel Lezcano wrote:
> From: Viresh Kumar <viresh.kumar@linaro.org>
>
> Migrate keystone driver to the new 'set-state' interface provided by
> clockevents core, the earlier 'set-mode' interface is marked obsolete
> now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> Also pass the mode-mask to keystone_timer_config() instead of the mode
> as mode macro's aren't valid anymore.
>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>