From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] irqchip: GICv3: Don't deactivate interrupts forwarded to a guest
Date: Tue, 11 Aug 2015 12:03:12 +0200 [thread overview]
Message-ID: <55C9C860.4020107@linaro.org> (raw)
In-Reply-To: <1436447951-22357-6-git-send-email-marc.zyngier@arm.com>
On 07/09/2015 03:19 PM, Marc Zyngier wrote:
> Commit 0a4377de3056 ("genirq: Introduce irq_set_vcpu_affinity() to
> target an interrupt to a VCPU") added just what we needed at the
> lowest level to allow an interrupt to be deactivated by a guest.
>
> When such a request reaches the GIC, it knows it doesn't need to
> perform the deactivation anymore, and can safely leave the guest
> do its magic. This of course requires additional support in both
> VFIO and KVM.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> ---
> drivers/irqchip/irq-gic-v3.c | 29 +++++++++++++++++++++++++++--
> 1 file changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index e02592b..a1ca9e6 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -70,6 +70,11 @@ static inline int gic_irq_in_rdist(struct irq_data *d)
> return gic_irq(d) < 32;
> }
>
> +static inline bool forwarded_irq(struct irq_data *d)
> +{
> + return d->handler_data != NULL;
> +}
> +
> static inline void __iomem *gic_dist_base(struct irq_data *d)
> {
> if (gic_irq_in_rdist(d)) /* SGI+PPI -> SGI_base for this CPU */
> @@ -231,6 +236,12 @@ static void gic_poke_irq(struct irq_data *d, u32 offset)
> static void gic_mask_irq(struct irq_data *d)
> {
> gic_poke_irq(d, GICD_ICENABLER);
> + /*
> + * When masking a forwarded interrupt, make sure it is
> + * deactivated as well.
To me it is not straightforward to understand why a forwarded IRQ would
need to be DIR'ed when masked. This is needed because of the disable_irq
optimisation, I would add a related comment.
Eric
> + */
> + if (static_key_true(&supports_deactivate) && forwarded_irq(d))
> + gic_poke_irq(d, GICD_ICACTIVER);
> }
>
> static void gic_unmask_irq(struct irq_data *d)
> @@ -296,8 +307,11 @@ static int gic_irq_get_irqchip_state(struct irq_data *d,
> static void gic_eoi_irq(struct irq_data *d)
> {
> if (static_key_true(&supports_deactivate)) {
> - /* No need to deactivate an LPI */
> - if (gic_irq(d) >= 8192)
> + /*
> + * No need to deactivate an LPI, or an interrupt that
> + * is is getting forwarded to a vcpu.
> + */
> + if (gic_irq(d) >= 8192 || forwarded_irq(d))
> return;
> gic_write_dir(gic_irq(d));
> } else {
> @@ -331,6 +345,16 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
> return gic_configure_irq(irq, type, base, rwp_wait);
> }
>
> +static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
> +{
> + if (static_key_true(&supports_deactivate)) {
> + d->handler_data = vcpu;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> static u64 gic_mpidr_to_affinity(u64 mpidr)
> {
> u64 aff;
> @@ -678,6 +702,7 @@ static struct irq_chip gic_chip = {
> .irq_set_affinity = gic_set_affinity,
> .irq_get_irqchip_state = gic_irq_get_irqchip_state,
> .irq_set_irqchip_state = gic_irq_set_irqchip_state,
> + .irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity,
> .flags = IRQCHIP_SET_TYPE_MASKED,
> };
>
>
next prev parent reply other threads:[~2015-08-11 10:03 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-09 13:19 [PATCH 0/6] irqchip: GICv2/v3: Add support for irq_vcpu_affinity Marc Zyngier
2015-07-09 13:19 ` [PATCH 1/6] irqchip: GICv3: Convert to EOImode == 1 Marc Zyngier
2015-08-11 9:14 ` Eric Auger
2015-08-12 12:38 ` Marc Zyngier
2015-07-09 13:19 ` [PATCH 2/6] irqchip: GIC: " Marc Zyngier
2015-08-11 9:15 ` Eric Auger
2015-08-12 13:31 ` Marc Zyngier
2015-08-12 17:40 ` Catalin Marinas
2015-07-09 13:19 ` [PATCH 3/6] irqchip: GICv3: Skip LPI deactivation Marc Zyngier
2015-08-11 9:42 ` Eric Auger
2015-08-12 13:34 ` Marc Zyngier
2015-08-12 14:28 ` Eric Auger
2015-07-09 13:19 ` [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts Marc Zyngier
2015-07-09 21:33 ` Thomas Gleixner
2015-07-10 7:52 ` Marc Zyngier
2015-07-10 8:17 ` Jiang Liu
2015-07-10 8:21 ` Marc Zyngier
2015-08-11 9:45 ` Eric Auger
2015-08-12 13:41 ` Marc Zyngier
2015-07-09 13:19 ` [PATCH 5/6] irqchip: GICv3: Don't deactivate interrupts forwarded to a guest Marc Zyngier
2015-08-11 10:03 ` Eric Auger [this message]
2015-08-12 14:20 ` Marc Zyngier
2015-08-12 15:09 ` Eric Auger
2015-08-12 15:40 ` Marc Zyngier
2015-08-12 15:51 ` Eric Auger
2015-07-09 13:19 ` [PATCH 6/6] irqchip: GIC: " Marc Zyngier
2015-08-11 10:06 ` [PATCH 0/6] irqchip: GICv2/v3: Add support for irq_vcpu_affinity Eric Auger
2015-08-12 14:21 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C9C860.4020107@linaro.org \
--to=eric.auger@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).