From mboxrd@z Thu Jan  1 00:00:00 1970
From: marc.zyngier@arm.com (Marc Zyngier)
Date: Fri, 14 Aug 2015 16:16:06 +0100
Subject: commit a71b092 "ARM: Convert handle_IRQ to use
 __handle_domain_irq" breaks DNS-323
In-Reply-To: <55CDF78F.6070001@free-electrons.com>
References: <55CDF5C3.7080204@vollmann.ch>
 <55CDF78F.6070001@free-electrons.com>
Message-ID: <55CE0636.3050205@arm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 14/08/15 15:13, Gregory CLEMENT wrote:
> Hi Detlef,
> 
> On 14/08/2015 16:05, Detlef Vollmann wrote:
>> Hello,
>>
>> this commit:
>>  > commit a71b092a9c68685a270ebdde7b5986ba8787e575
>>  > Author: Marc Zyngier <marc.zyngier@arm.com>
>>  > Date:   Tue Aug 26 11:03:18 2014 +0100
>>  >
>>  >     ARM: Convert handle_IRQ to use __handle_domain_irq
>> [...]
>> causes the kernel not to boot anymore on my DNS-323.
>> Soc: MV88F5182 Rev 2
>> CPU: ARM926 (Rev 0) running @ 500Mhz
>> CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f
>> Orion ID: MV88F5182-A2. TCLK=166666667.
>> DNS-323: Identified HW revision B1
>>
>> Boot stops after "Uncompressing Linux... done, booting the kernel."
>> Reverting the commit works fine for me.
>> Tested 4.1.2 and 4.2.0-rc6 with orion5x_defconfig.
> 
> Could you try the following patch ?
> 
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/356501.html

As a side note, having to revert that patch to get your system up and
running is a reliable indication that something is wrong with your
interrupt mapping, and that you are using 0 as a valid interrupt number
(which has been declared invalid a long time ago by the chief penguin).

Hopefully Gregory has put you in the right direction.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...