From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/4] irqchip: GICv3: Don't deactivate interrupts forwarded to a guest
Date: Mon, 17 Aug 2015 18:18:03 +0200 [thread overview]
Message-ID: <55D2093B.3000004@linaro.org> (raw)
In-Reply-To: <1439454526-1185-3-git-send-email-marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
On 08/13/2015 10:28 AM, Marc Zyngier wrote:
> Commit 0a4377de3056 ("genirq: Introduce irq_set_vcpu_affinity() to
> target an interrupt to a VCPU") added just what we needed at the
> lowest level to allow an interrupt to be deactivated by a guest.
>
> When such a request reaches the GIC, it knows it doesn't need to
> perform the deactivation anymore, and can safely leave the guest
> do its magic. This of course requires additional support in both
> VFIO and KVM.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> ---
> drivers/irqchip/irq-gic-v3.c | 35 +++++++++++++++++++++++++++++++++--
> 1 file changed, 33 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 61190fb..01c6329 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -70,6 +70,11 @@ static inline int gic_irq_in_rdist(struct irq_data *d)
> return gic_irq(d) < 32;
> }
>
> +static inline bool forwarded_irq(struct irq_data *d)
> +{
> + return d->handler_data != NULL;
> +}
> +
> static inline void __iomem *gic_dist_base(struct irq_data *d)
> {
> if (gic_irq_in_rdist(d)) /* SGI+PPI -> SGI_base for this CPU */
> @@ -231,6 +236,18 @@ static void gic_poke_irq(struct irq_data *d, u32 offset)
> static void gic_mask_irq(struct irq_data *d)
> {
> gic_poke_irq(d, GICD_ICENABLER);
> + /*
> + * When masking a forwarded interrupt, make sure it is
> + * deactivated as well.
> + *
> + * This ensures that an interrupt that is getting
> + * disabled/masked will not get "stuck", because there is
> + * noone to deactivate it (guest is being terminated).
> + */
> + if (static_key_true(&supports_deactivate)) {
> + if (forwarded_irq(d))
> + gic_poke_irq(d, GICD_ICACTIVER);
> + }
> }
>
> static void gic_unmask_irq(struct irq_data *d)
> @@ -296,8 +313,11 @@ static int gic_irq_get_irqchip_state(struct irq_data *d,
> static void gic_eoi_irq(struct irq_data *d)
> {
> if (static_key_true(&supports_deactivate)) {
> - /* No need to deactivate an LPI */
> - if (gic_irq(d) >= 8192)
> + /*
> + * No need to deactivate an LPI, or an interrupt that
> + * is is getting forwarded to a vcpu.
> + */
> + if (gic_irq(d) >= 8192 || forwarded_irq(d))
> return;
> gic_write_dir(gic_irq(d));
> } else {
> @@ -331,6 +351,16 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
> return gic_configure_irq(irq, type, base, rwp_wait);
> }
>
> +static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
> +{
> + if (static_key_true(&supports_deactivate)) {
> + d->handler_data = vcpu;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> static u64 gic_mpidr_to_affinity(u64 mpidr)
> {
> u64 aff;
> @@ -681,6 +711,7 @@ static struct irq_chip gic_chip = {
> .irq_set_affinity = gic_set_affinity,
> .irq_get_irqchip_state = gic_irq_get_irqchip_state,
> .irq_set_irqchip_state = gic_irq_set_irqchip_state,
> + .irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity,
> .flags = IRQCHIP_SET_TYPE_MASKED,
> };
>
>
next prev parent reply other threads:[~2015-08-17 16:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 8:28 [PATCH v2 0/4] irqchip: GICv2/v3: Add support for irq_vcpu_affinity Marc Zyngier
2015-08-13 8:28 ` [PATCH v2 1/4] irqchip: GICv3: Convert to EOImode == 1 Marc Zyngier
2015-08-17 16:10 ` Eric Auger
2015-08-13 8:28 ` [PATCH v2 2/4] irqchip: GICv3: Don't deactivate interrupts forwarded to a guest Marc Zyngier
2015-08-17 16:18 ` Eric Auger [this message]
2015-08-13 8:28 ` [PATCH v2 3/4] irqchip: GIC: Convert to EOImode == 1 Marc Zyngier
2015-08-17 16:27 ` Eric Auger
2015-08-13 8:28 ` [PATCH v2 4/4] irqchip: GIC: Don't deactivate interrupts forwarded to a guest Marc Zyngier
2015-08-18 8:26 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D2093B.3000004@linaro.org \
--to=eric.auger@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).