linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller
Date: Sat, 22 Aug 2015 16:23:41 +0300	[thread overview]
Message-ID: <55D877DD.3010400@cogentembedded.com> (raw)
In-Reply-To: <1440207911-17666-3-git-send-email-chunfeng.yun@mediatek.com>

Hello.

On 8/22/2015 4:45 AM, Chunfeng Yun wrote:

> add a DT binding documentation of xHCI host controller for the
> MT8173 SoC from Mediatek.

> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>   .../devicetree/bindings/usb/mt8173-xhci.txt        | 52 ++++++++++++++++++++++
>   1 file changed, 52 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> new file mode 100644
> index 0000000..8e6e463
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> @@ -0,0 +1,52 @@
> +mt65XX xHCI

    The file is called mt8173-xhci.txt. Are you sure MT65xx should be here?

> +
> +The device node for Mediatek SOC usb3.0 host controller
> +
> +Required properties:
> + - compatible : should contain "mediatek,mt8173-xhci"
> + - reg : specifies physical base address and size of the registers,
> +	the first one for MAC, the second for IPPC
> + - interrupts : interrupt used by the controller
> + - power-domains : a phandle to USB power domain node to control usb's

    USB's -- be consistent, please.

> +	mtcmos
> + - vusb33-supply : regulator of usb avdd3.3v
> +
> + - clocks : a list of phandle + clock-specifier pairs, one for each
> +	entry in clock-names
> + - clock-names : must contain
> +	"sys_ck": for clock of xHCI MAC
> +	"wakeup_deb_p0": for usb wakeup debounce clock of port0
> +	"wakeup_deb_p0": for usb wakeup debounce clock of port1

    USB.

> +
> + - phys : a list of phandle + phy specifier pairs
> + - usb3-lpm-capable : supports USB3 LPM
> + - mediatek,syscon-wakeup : phandle to syscon used to access usb wakeup
> +	control register
> + - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
> +	mode; others means don't enable wakeup source of usb

    "Others mean" and "USB".

[...]

MBR, Sergei

  reply	other threads:[~2015-08-22 13:23 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-22  1:45 Mediatek xHCI support Chunfeng Yun
2015-08-22  1:45 ` [PATCH v6 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-08-22  1:45 ` [PATCH v6 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-08-22 13:23   ` Sergei Shtylyov [this message]
2015-09-01 11:46     ` chunfeng yun
2015-08-22  1:45 ` [PATCH v6 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-08-22  1:45 ` [PATCH v6 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-08-26 21:18   ` Daniel Thompson
2015-09-01 12:29     ` chunfeng yun
2015-08-22  1:45 ` [PATCH v6 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55D877DD.3010400@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).