From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Tue, 25 Aug 2015 12:06:55 +0530 Subject: [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node In-Reply-To: <55B92B88.1080409@ti.com> References: <1438168187-1614-1-git-send-email-kishon@ti.com> <1438168187-1614-13-git-send-email-kishon@ti.com> <55B92B88.1080409@ti.com> Message-ID: <55DC0D07.7030504@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Tony, On Thursday 30 July 2015 01:07 AM, Nishanth Menon wrote: > On 07/29/2015 06:09 AM, Kishon Vijay Abraham I wrote: >> For beagle x15, both the vdd and io lines are connected to the >> same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3. >> Remove it. >> >> Signed-off-by: Kishon Vijay Abraham I >> --- >> arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 - >> 1 file changed, 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts >> index a63bf78..d0db5c5 100644 >> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts >> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts >> @@ -579,7 +579,6 @@ >> pinctrl-0 = <&mmc1_pins_default>; >> >> vmmc-supply = <&ldo1_reg>; >> - vmmc_aux-supply = <&vdd_3v3>; >> pbias-supply = <&pbias_mmc_reg>; >> bus-width = <4>; >> cd-gpios = <&gpio6 27 0>; /* gpio 219 */ >> > Acked-by: Nishanth Menon Can you pick this one or you want me to resend it? Thanks Kishon