From mboxrd@z Thu Jan  1 00:00:00 1970
From: marc.zyngier@arm.com (Marc Zyngier)
Date: Thu, 10 Sep 2015 15:49:00 +0100
Subject: [PATCH] arm64: Add support for hardware updates of the access
 and dirty pte bits
In-Reply-To: <55F193BE.90608@citrix.com>
References: <1436545468-1549-1-git-send-email-catalin.marinas@arm.com>
 <55F06A87.3000204@citrix.com> <55F17F2E.7080808@arm.com>
 <55F193BE.90608@citrix.com>
Message-ID: <55F1985C.8050602@arm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 10/09/15 15:29, Julien Grall wrote:
> On 10/09/15 14:01, Marc Zyngier wrote:
>> Hi Julien,
>>
>> On 09/09/15 18:21, Julien Grall wrote:
>>> Hi Catalin,
>>>
>>> I've tried to boot the latest linus/master (a794b4f) which include this
>>> patch as DOM0 on xgene. This is failing late in the boot with
>>> a BUG (see trace below).
>>>
>>> The bisector pointed me to this patch. When I disable
>>> CONFIG_ARM64_HW_AFDBM, I'm able to boot the kernel and use it
>>> without any issue.
>>>
>>> Although, I'm not sure to understand how this patch could
>>> possibly break the filesystem subsystem.
>>>
>>> Do you have any insight for debugging this problem?
>>
>> I've just given it a good shake on the Mustang we have here, and I'm not
>> experiencing anything like this. Any chance you could print out the
>> ID_AA64MMFR1_EL1 register value, just in case?
> 
> The value of ID_AA64MMFR1_EL1 is 0000000000000000
> 
> I'm using Debian Jessie for the userspace with an LVM partition for the
> home. U-boot is used to boot the kernel.

Similar setup here (except for LVM). The box seems quite solid (multiple
kernel compiles, and nothing is screaming).

My u-boot says:

CPU0: APM ARM 64-bit Potenza Rev A3 2400MHz PCP 2400MHz
     32 KB ICACHE, 32 KB DCACHE
     SOC 2000MHz IOBAXI 400MHz AXI 250MHz AHB 200MHz GFC 125MHz

How does this compares to yours?

	M.
-- 
Jazz is not dead. It just smells funny...