From mboxrd@z Thu Jan  1 00:00:00 1970
From: julien.grall@citrix.com (Julien Grall)
Date: Thu, 10 Sep 2015 16:10:15 +0100
Subject: [PATCH] arm64: Add support for hardware updates of the access
 and dirty pte bits
In-Reply-To: <55F199AE.2020003@arm.com>
References: <1436545468-1549-1-git-send-email-catalin.marinas@arm.com>
 <55F06A87.3000204@citrix.com> <20150910100753.GE12294@localhost>
 <55F19785.4090106@citrix.com> <55F199AE.2020003@arm.com>
Message-ID: <55F19D57.70209@citrix.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 10/09/15 15:54, Marc Zyngier wrote:
> On 10/09/15 15:45, Julien Grall wrote:
>> Hi,
>>
>> On 10/09/15 11:07, Catalin Marinas wrote:
>>> On Wed, Sep 09, 2015 at 06:21:11PM +0100, Julien Grall wrote:
>>>> I've tried to boot the latest linus/master (a794b4f) which include this
>>>> patch as DOM0 on xgene. This is failing late in the boot with
>>>> a BUG (see trace below).
>>>>
>>>> The bisector pointed me to this patch. When I disable
>>>> CONFIG_ARM64_HW_AFDBM, I'm able to boot the kernel and use it
>>>> without any issue.
>>>>
>>>> Although, I'm not sure to understand how this patch could
>>>> possibly break the filesystem subsystem.
>>>
>>> I don't understand either. It seems that the kernel raises a BUG on
>>> !PagePrivate but this patch never touches the page structure, only ptes.
>>>
>>> I recall to have tested it on XGene but I can try it again (bare metal).
>>> Is the bare metal error for you the same?
>>
>> Same on bare-metal. I'm using Debian Jessie for the userspace and boot
>> using U-boot:
>>
>> U-Boot 2013.04-mustang_sw_1.15.12 (May 20 2015 - 10:03:33)
>>
>> CPU0: APM ARM 64-bit Potenza Rev A3 2400MHz PCP 2400MHz
>>      32 KB ICACHE, 32 KB DCACHE
>>      SOC 2000MHz IOBAXI 400MHz AXI 250MHz AHB 200MHz GFC 125MHz
>> Boot from SPI-NOR
>> Slimpro FW:
>>         Ver: 2.1
>> Board: Mustang - AppliedMicro APM883208-xNA24SPT Reference Board
>> I2C:   ready
>> DRAM:  ECC 16 GiB @ 1600MHz
>> SF: Detected N25Q256 with page size 256 Bytes, total 32 MiB
> 
> Here's mine:
> 
> U-Boot 2013.04-mustang_sw_1.13.28-beta (Aug 25 2014 - 14:16:10)
> 
> CPU0: APM ARM 64-bit Potenza Rev A3 2400MHz PCP 2400MHz
>      32 KB ICACHE, 32 KB DCACHE
>      SOC 2000MHz IOBAXI 400MHz AXI 250MHz AHB 200MHz GFC 125MHz
> Boot from SPI-NOR
> SLIMpro FW 2.2
> Board: Mustang - AppliedMicro APM887408 Reference Board
> I2C:   ready
> DRAM:  ECC 16 GiB @ 1600MHz
> SF: Detected N25Q256 with page size 256 Bytes, total 32 MiB
> 
> Same core, different board apparently. And of course an ancient U-Boot.

IIRC we had to update our firmware in order to get the correct GICD
region [1].

Regards,

[1] http://lists.xen.org/archives/html/xen-devel/2015-04/msg02816.html

-- 
Julien Grall