From mboxrd@z Thu Jan 1 00:00:00 1970 From: jonathanh@nvidia.com (Jon Hunter) Date: Fri, 11 Sep 2015 15:08:32 +0100 Subject: [GIT PULL 9/9] ARM: tegra: Default configuration updates for v4.3-rc1 In-Reply-To: <20150911135738.GA23109@ulmo.nvidia.com> References: <20150819091358.GA26627@ulmo> <1439977724.4135.90.camel@collabora.co.uk> <20150819103305.GF26627@ulmo> <55F2AF45.5040706@nvidia.com> <20150911123759.GA8473@ulmo> <55F2D3D4.5090608@nvidia.com> <20150911132113.GA21673@ulmo> <55F2D995.50906@nvidia.com> <20150911135738.GA23109@ulmo.nvidia.com> Message-ID: <55F2E060.9080106@nvidia.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/09/15 14:57, Thierry Reding wrote: [snip] > Then I did the following: > > -sh-4.3# modprobe snd-hda-tegra > [ 2243.786143] hdaudio hdaudioC0D3: Unable to bind the codec > -sh-4.3# lsmod > Module Size Used by > snd_hda_tegra 4764 0 > snd_hda_codec 75955 1 snd_hda_tegra > snd_hda_core 26603 2 snd_hda_codec,snd_hda_tegra > snd_pcm 69108 3 snd_hda_codec,snd_hda_tegra,snd_hda_core > snd_timer 17264 1 snd_pcm > snd 42248 4 snd_timer,snd_pcm,snd_hda_codec,snd_hda_tegra > soundcore 858 1 snd > nouveau 1302185 0 > tegra_devfreq 5375 0 > ttm 65238 1 nouveau > -sh-4.3# modprobe snd-hda-codec-hdmi > -sh-4.3# modprobe -r snd-hda-tegra > -sh-4.3# modprobe snd-hda-tegra > [ 2263.934328] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 > > So all worked just fine. That's interesting. For me (as per my earlier email), I did not see the "unable to bind the codec" and modprobe attempted to load snd-hda-codec-hdmi after snd-hda-tega. Puzzled. Jon