From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Sat, 12 Sep 2015 12:58:51 -0700 Subject: [PATCH 2/7] Documentation: dt: brcmstb: add waketimer documentation In-Reply-To: <1434672696-13632-3-git-send-email-computersforpeace@gmail.com> References: <1434672696-13632-1-git-send-email-computersforpeace@gmail.com> <1434672696-13632-3-git-send-email-computersforpeace@gmail.com> Message-ID: <55F483FB.1010109@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Le 06/18/15 17:11, Brian Norris a ?crit : > Signed-off-by: Brian Norris Although the binding looks good to me, I am not applying this one just yet since we would want to merge the wake-timer driver and its binding at the same time, thanks! > --- > .../bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt > > diff --git a/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt > new file mode 100644 > index 000000000000..68c4329b6af0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt > @@ -0,0 +1,20 @@ > +* Broadcom STB Wake-up Timer > + > +The Broadcom STB wake-up timer provides a high-resolution timer, with the > +ability to wake up the system from low-power suspend/standby modes. > + > +Required properties: > +- compatible : should contain "brcm,brcmstb-waketimer" > +- reg : the register start and length for the WKTMR block > +- interrupts : The TIMER interrupt > +- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2 > + interrupt controller node > + > +Example: > + > +waketimer at f0411580 { > + compatible = "brcm,brcmstb-waketimer"; > + reg = <0xf0411580 0x14>; > + interrupts = <0x3>; > + interrupt-parent = <&aon_pm_l2_intc>; > +}; > -- Florian