sdhci: runtime suspend/resume on card insert/removal

[vaibhav.hiremath@linaro.org (Vaibhav Hiremath)]

On Thursday 10 September 2015 01:34 PM, Jisheng Zhang wrote:
> Hi Russell,
>
> On Thu, 10 Sep 2015 09:02:33 +0100
> Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
>
>> On Thu, Sep 10, 2015 at 03:31:29PM +0800, Jisheng Zhang wrote:
>>> Hi Vaibhav,
>>>
>>> On Thu, 10 Sep 2015 12:40:48 +0530
>>> Vaibhav Hiremath <vaibhav.hiremath@linaro.org> wrote:
>>>
>>>> Hi,
>>>>
>>>> During my testing of SDHCI-PXAV3 driver on Marvell's pxa1928
>>>> based platform, I observed that runtime PM suspend/resume is having
>>>> issues with card insertion and removal.
>>>>
>>>> Let me try to explain it using execution sequence -
>>>>
>>>> During boot:
>>>>
>>>> MMC SD card gets detected as expected.
>>>>
>>>> [    2.431012] mmc1: new high speed SDHC card at address 1234
>>>> [    2.437235] mmcblk1: mmc1:1234 SA04G 3.63 GiB
>>>> [    2.444841]  mmcblk1: p1
>>>>
>>>>
>>>> Now after coming to the linux prompt, if card removal event occurs
>>>> then the call sequence is -
>>>>
>>>>    sdhci_irq() -->
>>>>     -> sdhci_thread_irq(): host->thread_isr - 0x80
>>>>        -> sdhci_card_event()
>>>>        -> mmc_detect_change()
>>>>           --> _mmc_detect_change()
>>>>               --->  mmc_sd_detect()
>>>>                     mmc_sd_remove()
>>>>                     mmc_remove_card()
>>>>                     mmc_bus_remove()
>>>>                     mmc_power_off()
>>>>                     mmc_set_initial_state()
>>>>                     sdhci_set_ios()
>>>>                     ...
>>>>          sdhci_pxav3_runtime_suspend()
>>>>          sdhci_runtime_suspend_host()
>>>>
>>>>
>>>> Till here everything looks perfect :) (if I got it right)
>>>>
>>>> Now on card insertion again, the expectation is, runtime resume should
>>>> get called as part of interrupt trigger from the SDHCI controller on
>>>> card insertion.
>>>
>>> AFAIK, card insertion => wakeup irq, this irq doesn't come from SDHCI
>>
>> Wakeup IRQs are what happens when the _system_ is in suspend, not
>> when the device is runtime suspended.
>
> Oh, yes. Sorry for misleading, I didn't express myself clearly. What
> I really means is that the card insertion/remove irq which could finally
> cause sdhci host resumed.
>

So Jisheng,

You are ok with above change, right?

Thanks,
Vaibhav