From mboxrd@z Thu Jan 1 00:00:00 1970 From: robh@kernel.org (Rob Herring) Date: Tue, 15 Sep 2015 14:43:53 -0500 Subject: [PATCH v9 5/6] Documentation: DT: Add HiSilicon PCIe host binding In-Reply-To: <1442321361-174300-6-git-send-email-wangzhou1@hisilicon.com> References: <1442321361-174300-1-git-send-email-wangzhou1@hisilicon.com> <1442321361-174300-6-git-send-email-wangzhou1@hisilicon.com> Message-ID: <55F874F9.1060804@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/15/2015 07:49 AM, Zhou Wang wrote: > This patch adds related DTS binding document for HiSilicon PCIe host driver. > > Signed-off-by: Zhou Wang > --- > .../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > > diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > new file mode 100644 > index 0000000..2afc9d1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > @@ -0,0 +1,46 @@ > +HiSilicon PCIe host bridge DT description > + > +HiSilicon PCIe host controller is based on Designware PCI core. > +It shares common functions with PCIe Designware core driver and inherits > +common properties defined in > +Documentation/devicetree/bindings/pci/designware-pci.txt. > + > +Additional properties are described here: > + > +Required properties: > +- compatible: Should contain "hisilicon,hip05-pcie". > +- reg: Should contain rc_dbi, subctrl, config registers location and length. > +- reg-names: Must include the following entries: > + "rc_dbi": controller configuration registers; > + "subctrl": whole PCIe hosts configuration registers; > + "config": PCIe configuration space registers. > +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. > +- port-id: Should be 0, 1, 2 or 3. What is port-id for? Use of instance indexes need to have good reason. Rob