From: josh.wu@atmel.com (Josh Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] media: atmel-isi: parse the DT parameters for vsync/hsync/pixclock polarity
Date: Fri, 18 Sep 2015 19:13:59 +0800 [thread overview]
Message-ID: <55FBF1F7.1090904@atmel.com> (raw)
In-Reply-To: <Pine.LNX.4.64.1509181144170.15589@axis700.grange>
Hi, Guennadi
On 9/18/2015 5:44 PM, Guennadi Liakhovetski wrote:
> Hi Nicolas,
>
> Patch handling is on my todo for the coming weekend...
Beside this patch, Atmel-isi still have server other patches in the
patchwork for a long time. So some patch may need to rebase.
Just for your convenience I create a branch here:
https://github.com/JoshWu/linux-at91/commits/atmel-isi-v4.3,
which collected all the Atmel-isi patches that still not merged. You can
take it as a reference.
Of cause, if you want I can sent out a pull request for it. thanks.
Best Regards,
Josh Wu
>
> Thanks
> Guennadi
>
> On Fri, 18 Sep 2015, Nicolas Ferre wrote:
>
>> Le 04/08/2015 13:22, Laurent Pinchart a ?crit :
>>> Hi Josh,
>>>
>>> Thank you for the patch.
>>>
>>> On Tuesday 04 August 2015 17:37:49 Josh Wu wrote:
>>>> This patch will get the DT parameters of vsync/hsync/pixclock polarity, and
>>>> pass to driver.
>>>>
>>>> Also add a debug information for test purpose.
>>>>
>>>> Signed-off-by: Josh Wu <josh.wu@atmel.com>
>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> Guennadi, Mauro,
>>
>> I don't see this patch in Linux-next and I'm not so used to
>> http://git.linuxtv.org but didn't find it either.
>>
>> Well in fact it's just a lengthy version of "ping" ;-)
>>
>> Bye,
>>
>>>> ---
>>>>
>>>> Changes in v3:
>>>> - add embedded sync dt property support.
>>>>
>>>> Changes in v2:
>>>> - rewrite the debug message and add pix clock polarity setup thanks to
>>>> Laurent.
>>>> - update the commit log.
>>>>
>>>> drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++
>>>> 1 file changed, 15 insertions(+)
>>>>
>>>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
>>>> b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939
>>>> 100644
>>>> --- a/drivers/media/platform/soc_camera/atmel-isi.c
>>>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
>>>> @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct
>>>> soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
>>>> cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
>>>>
>>>> + dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix
>>>> clock %s edge\n", + common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" :
>>>> "high",
>>>> + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high",
>>>> + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising");
>>>> +
>>>> if (isi->pdata.has_emb_sync)
>>>> cfg1 |= ISI_CFG1_EMB_SYNC;
>>>> if (isi->pdata.full_mode)
>>>> @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi,
>>>> return -EINVAL;
>>>> }
>>>>
>>>> + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
>>>> + isi->pdata.hsync_act_low = true;
>>>> + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
>>>> + isi->pdata.vsync_act_low = true;
>>>> + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
>>>> + isi->pdata.pclk_act_falling = true;
>>>> +
>>>> + if (ep.bus_type == V4L2_MBUS_BT656)
>>>> + isi->pdata.has_emb_sync = true;
>>>> +
>>>> return 0;
>>>> }
>>
>> --
>> Nicolas Ferre
>>
next prev parent reply other threads:[~2015-09-18 11:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-04 9:37 [PATCH v3] media: atmel-isi: parse the DT parameters for vsync/hsync/pixclock polarity Josh Wu
2015-08-04 11:22 ` Laurent Pinchart
2015-09-18 9:20 ` Nicolas Ferre
2015-09-18 9:44 ` Guennadi Liakhovetski
2015-09-18 11:13 ` Josh Wu [this message]
2015-09-18 11:21 ` Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55FBF1F7.1090904@atmel.com \
--to=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).