From mboxrd@z Thu Jan 1 00:00:00 1970 From: tommyhebb@gmail.com (Thomas Hebb) Date: Sat, 26 Sep 2015 20:47:44 -0400 Subject: [PATCH 2/4 RESEND] ARM: dts: berlin: change BG2Q's USB PHY compatible Message-ID: <56073CB0.3060607@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently, BG2Q shares a compatible with BG2. This is incorrect, since BG2 and BG2Q use different USB PLL dividers. In reality, BG2Q shares a divider with BG2CD. Change BG2Q's USB PHY compatible string to reflect that. Signed-off-by: Thomas Hebb Cc: stable at vger.kernel.org --- This patch seems to have been missed from my original series (all the rest made it into 4.2), and as a result the BG2Q currently uses the wrong divider. arch/arm/boot/dts/berlin2q.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a4849..d4dbd28 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -152,7 +152,7 @@ }; usb_phy2: phy at a2f400 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 14>; @@ -170,7 +170,7 @@ }; usb_phy0: phy at b74000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 12>; @@ -178,7 +178,7 @@ }; usb_phy1: phy at b78000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 13>; -- 2.4.4