From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: lager: use generic pinctrl properties
Date: Thu, 17 Mar 2016 08:20:06 +0200 [thread overview]
Message-ID: <56086705.DPAS05EZY7@avalon> (raw)
In-Reply-To: <1458090189-25803-1-git-send-email-horms+renesas@verge.net.au>
Hi Simon,
Thank you for the patch.
On Wednesday 16 March 2016 10:03:09 Simon Horman wrote:
> Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and
> groups properties") renesas pfc drivers accept generic "function", "pins"
> and "groups" properties.
>
> This patch updates the lager device tree to use the generic
> rather than renesas-specific properties.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Based on renesas-devel-20160315-v4.5
> ---
> arch/arm/boot/dts/r8a7790-lager.dts | 92 ++++++++++++++++-----------------
> 1 file changed, 46 insertions(+), 46 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts index aa6ca92a9485..a5828721ab7c
> 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -314,119 +314,119 @@
> pinctrl-names = "default";
>
> du_pins: du {
> - renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
> - renesas,function = "du";
> + groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
> + function = "du";
> };
>
> scif0_pins: serial0 {
> - renesas,groups = "scif0_data";
> - renesas,function = "scif0";
> + groups = "scif0_data";
> + function = "scif0";
> };
>
> scif_clk_pins: scif_clk {
> - renesas,groups = "scif_clk";
> - renesas,function = "scif_clk";
> + groups = "scif_clk";
> + function = "scif_clk";
> };
>
> ether_pins: ether {
> - renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
> - renesas,function = "eth";
> + groups = "eth_link", "eth_mdio", "eth_rmii";
> + function = "eth";
> };
>
> phy1_pins: phy1 {
> - renesas,groups = "intc_irq0";
> - renesas,function = "intc";
> + groups = "intc_irq0";
> + function = "intc";
> };
>
> scifa1_pins: serial1 {
> - renesas,groups = "scifa1_data";
> - renesas,function = "scifa1";
> + groups = "scifa1_data";
> + function = "scifa1";
> };
>
> sdhi0_pins: sd0 {
> - renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
> - renesas,function = "sdhi0";
> + groups = "sdhi0_data4", "sdhi0_ctrl";
> + function = "sdhi0";
> };
>
> sdhi2_pins: sd2 {
> - renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
> - renesas,function = "sdhi2";
> + groups = "sdhi2_data4", "sdhi2_ctrl";
> + function = "sdhi2";
> };
>
> mmc1_pins: mmc1 {
> - renesas,groups = "mmc1_data8", "mmc1_ctrl";
> - renesas,function = "mmc1";
> + groups = "mmc1_data8", "mmc1_ctrl";
> + function = "mmc1";
> };
>
> qspi_pins: spi0 {
> - renesas,groups = "qspi_ctrl", "qspi_data4";
> - renesas,function = "qspi";
> + groups = "qspi_ctrl", "qspi_data4";
> + function = "qspi";
> };
>
> msiof1_pins: spi2 {
> - renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
> + groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
> "msiof1_tx";
> - renesas,function = "msiof1";
> + function = "msiof1";
> };
>
> i2c0_pins: i2c0 {
> - renesas,groups = "i2c0";
> - renesas,function = "i2c0";
> + groups = "i2c0";
> + function = "i2c0";
> };
>
> iic0_pins: iic0 {
> - renesas,groups = "iic0";
> - renesas,function = "iic0";
> + groups = "iic0";
> + function = "iic0";
> };
>
> iic1_pins: iic1 {
> - renesas,groups = "iic1";
> - renesas,function = "iic1";
> + groups = "iic1";
> + function = "iic1";
> };
>
> iic2_pins: iic2 {
> - renesas,groups = "iic2";
> - renesas,function = "iic2";
> + groups = "iic2";
> + function = "iic2";
> };
>
> iic3_pins: iic3 {
> - renesas,groups = "iic3";
> - renesas,function = "iic3";
> + groups = "iic3";
> + function = "iic3";
> };
>
> hsusb_pins: hsusb {
> - renesas,groups = "usb0_ovc_vbus";
> - renesas,function = "usb0";
> + groups = "usb0_ovc_vbus";
> + function = "usb0";
> };
>
> usb0_pins: usb0 {
> - renesas,groups = "usb0";
> - renesas,function = "usb0";
> + groups = "usb0";
> + function = "usb0";
> };
>
> usb1_pins: usb1 {
> - renesas,groups = "usb1";
> - renesas,function = "usb1";
> + groups = "usb1";
> + function = "usb1";
> };
>
> usb2_pins: usb2 {
> - renesas,groups = "usb2";
> - renesas,function = "usb2";
> + groups = "usb2";
> + function = "usb2";
> };
>
> vin1_pins: vin {
> - renesas,groups = "vin1_data8", "vin1_clk";
> - renesas,function = "vin1";
> + groups = "vin1_data8", "vin1_clk";
> + function = "vin1";
> };
>
> sound_pins: sound {
> - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> - renesas,function = "ssi";
> + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> + function = "ssi";
> };
>
> sound_clk_pins: sound_clk {
> - renesas,groups = "audio_clk_a";
> - renesas,function = "audio_clk";
> + groups = "audio_clk_a";
> + function = "audio_clk";
> };
> };
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2016-03-17 6:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-16 1:03 [PATCH] ARM: dts: lager: use generic pinctrl properties Simon Horman
2016-03-16 8:56 ` Geert Uytterhoeven
2016-03-17 2:14 ` Simon Horman
2016-03-17 6:20 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56086705.DPAS05EZY7@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).