From: m-karicheri2@ti.com (Murali Karicheri)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] soc: ti: knav_qmss: enable accumulator queue support
Date: Tue, 13 Oct 2015 09:56:37 -0400 [thread overview]
Message-ID: <561D0D95.1040401@ti.com> (raw)
In-Reply-To: <1444679211-823-1-git-send-email-m-karicheri2@ti.com>
On 10/12/2015 03:46 PM, Murali Karicheri wrote:
> This patch series enable accumulator queue support for K2 SoCs. Accumulator
> queues are a type of qmss queue that is monitored by the PDSP firmware and
> accumulated. Host is interrupted by PDSP firmware when packets become
> available in a ring buffer shared between the host and PDSP.
>
> There was an issue raised when merging the original patch set at
> (1) https://lkml.org/lkml/2015/9/4/681
> [PATCH v1 1/2] soc: ti: display firmware file name as part of boot log
> (2) https://lkml.org/lkml/2015/9/4/680
> [PATCH v1 2/2] ARM: dts: keystone: enable accumulator channels
>
> This series fixes the issues raised against above patch set. Key issues
> addressed.
>
> - Remove the firmware filename from DT and add it to the driver.
> Use a name ks2_qmss_pdsp_acc48.bin. The idea is this can be a
> soft link pointing to the real firmware file in file system.
>
> - Move the description of the driver design from DT document to one
> under Documentation/arm/keystone/knav-qmss.txt. Update the this
> document with location of acc firmware available under
> linux-firmware.git.
>
> Additionally added accumulator queue support optional so that lack of
> firmware in the file system will not cause other queue types not available
> due to driver probe failure.
>
> Murali Karicheri (4):
> Documentation: dt: soc: move driver description to a separate document
> soc: ti: add firmware file name as part of the driver
> ARM: dts: keystone: enable accumulator channels
> soc: ti: qmss: make acc queue support optional in the driver
>
> Documentation/arm/keystone/knav-qmss.txt | 56 ++++++++++++++++++
> .../bindings/soc/ti/keystone-navigator-qmss.txt | 21 ++-----
> arch/arm/boot/dts/k2e-netcp.dtsi | 23 ++++++++
> arch/arm/boot/dts/k2hk-netcp.dtsi | 24 ++++++++
> arch/arm/boot/dts/k2l-netcp.dtsi | 23 ++++++++
> drivers/soc/ti/knav_qmss.h | 3 +-
> drivers/soc/ti/knav_qmss_acc.c | 10 +++-
> drivers/soc/ti/knav_qmss_queue.c | 67 ++++++++++++++--------
> 8 files changed, 183 insertions(+), 44 deletions(-)
> create mode 100644 Documentation/arm/keystone/knav-qmss.txt
>
Santosh, Arnd,
Could you please review and let me know if there is any comment. If
looks good, could you please merge to v4.4 next branch?
Murali
--
Murali Karicheri
Linux Kernel, Keystone
next prev parent reply other threads:[~2015-10-13 13:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-12 19:46 [PATCH v2 0/4] soc: ti: knav_qmss: enable accumulator queue support Murali Karicheri
2015-10-12 19:46 ` [PATCH 1/4] Documentation: dt: soc: move driver description to a separate document Murali Karicheri
2015-10-13 14:42 ` Rob Herring
2015-10-13 15:44 ` Murali Karicheri
2015-10-13 17:28 ` Murali Karicheri
2015-10-13 18:01 ` Rob Herring
2015-10-13 18:21 ` Murali Karicheri
2015-10-12 19:46 ` [PATCH v2 2/4] soc: ti: add firmware file name as part of the driver Murali Karicheri
2015-10-13 14:32 ` Arnd Bergmann
2015-10-12 19:46 ` [PATCH v2 3/4] ARM: dts: keystone: enable accumulator channels Murali Karicheri
2015-10-12 19:46 ` [PATCH 4/4] soc: ti: qmss: make acc queue support optional in the driver Murali Karicheri
2015-10-12 19:54 ` [PATCH v2 0/4] soc: ti: knav_qmss: enable accumulator queue support Murali Karicheri
2015-10-13 13:56 ` Murali Karicheri [this message]
2015-10-13 16:01 ` santosh shilimkar
2015-10-13 16:14 ` Murali Karicheri
2015-10-13 16:21 ` santosh shilimkar
2015-10-13 16:42 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=561D0D95.1040401@ti.com \
--to=m-karicheri2@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).