* [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property
@ 2015-10-13 13:32 Sudeep Holla
2015-10-13 13:32 ` [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean Sudeep Holla
` (3 more replies)
0 siblings, 4 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-13 13:32 UTC (permalink / raw)
To: linux-arm-kernel
The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
two boolean properties to enable gpio buttons as wakeup source:
1. "wakeup-source" or
2. the legacy "gpio-key,wakeup"
However juno, ste-snowball and emev2-kzm9d dts file have a undetected
"wakeup" property to indictate the wakeup source.
This patch fixes it by making use of "wakeup-source" property.
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++----
arch/arm/boot/dts/ste-snowball.dts | 10 +++++-----
arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 955c24ee4a8c..8c24975e8f9d 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -35,28 +35,28 @@
button at 1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-1";
linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
button at 2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-2";
linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
button at 3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-3";
linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
button at 4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-4";
linux,code = <KEY_4>;
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 32a5ccb14e7e..e80e42163883 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -47,35 +47,35 @@
button at 1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0 0x4>;
};
button at 2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <3>;
label = "extkb1";
gpios = <&gpio4 23 0x4>;
};
button at 3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <4>;
label = "extkb2";
gpios = <&gpio4 24 0x4>;
};
button at 4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <5>;
label = "extkb3";
gpios = <&gpio5 1 0x4>;
};
button at 5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <6>;
label = "extkb4";
gpios = <&gpio5 2 0x4>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 05e461dc6c1f..a15e1fb4d192 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -61,42 +61,42 @@
button at 1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
button at 2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
button at 3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
button at 4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
button at 5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
button at 6 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <99>;
label = "NMI";
gpios = <&iofpga_gpio0 5 0x4>;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean
2015-10-13 13:32 [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property Sudeep Holla
@ 2015-10-13 13:32 ` Sudeep Holla
2015-10-13 14:07 ` Rob Herring
2015-10-13 14:38 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property Sudeep Holla
2015-10-14 0:13 ` [PATCH 1/2] ARM: dts: fix gpio-keys " Simon Horman
` (2 subsequent siblings)
3 siblings, 2 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-13 13:32 UTC (permalink / raw)
To: linux-arm-kernel
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.
Few dts files assign value "1" to gpio-key,wakeup and in one instance a
value "0" is assigned probably assuming it won't be enabled as a wakeup
source. Since the presence of the boolean property indicates it is
enabled, value of "0" have no value.
This patch removes the property where value "0" is assigned and removes
the value "1" in most of the other cases.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip at lists.infradead.org
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: spear-devel at list.st.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 3 +--
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
arch/arm/boot/dts/spear1340-evb.dts | 2 +-
arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
11 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index c0273755431a..71a15772cda6 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -74,7 +74,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
debounce-interval = <100>;
};
button at 1 {
@@ -82,7 +82,6 @@
linux,code = <104>;
label = "GPIO Key Vol-";
linux,input-type = <1>;
- gpio-key,wakeup = <0>;
debounce-interval = <100>;
};
/* VOL+ comes somehow thru the ADC */
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index e36383c701dc..72bf52a04506 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -65,7 +65,7 @@
#size-cells = <0>;
button at 0 {
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5d2b05..ba6b174777e7 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -63,7 +63,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e7894b05..ab013155f04f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -103,7 +103,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 20fa0ef0b96b..4fa2dedd0c7a 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -67,7 +67,7 @@
#size-cells = <0>;
button at 0 {
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index f82b956ebf17..9b7f389c38e5 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -74,7 +74,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc73c8a4..2ee425523f5c 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -73,7 +73,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index e48857249ce7..6673d74ab0c0 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -161,7 +161,7 @@
linux,code = <0x100>;
gpios = <&gpio0 7 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index c611f5606dfe..9071344fa47c 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -223,7 +223,7 @@
linux,code = <0x100>;
gpios = <&gpio1 1 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0aa6fef5ce22..3c5b28c0fce4 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -141,7 +141,7 @@
linux,code = <0x100>;
gpios = <&stmpegpio 3 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
};
button at 2 {
@@ -149,7 +149,7 @@
linux,code = <0x200>;
gpios = <&stmpegpio 2 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 401a81231eb9..58a2829d9ea7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -71,7 +71,7 @@
pinctrl-0 = <&pwr_key>;
button at 0 {
- gpio-key,wakeup = <1>;
+ gpio-key,wakeup;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean
2015-10-13 13:32 ` [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean Sudeep Holla
@ 2015-10-13 14:07 ` Rob Herring
2015-10-13 14:26 ` Sudeep Holla
2015-10-13 14:38 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property Sudeep Holla
1 sibling, 1 reply; 12+ messages in thread
From: Rob Herring @ 2015-10-13 14:07 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 13, 2015 at 8:32 AM, Sudeep Holla <sudeep.holla@arm.com> wrote:
> Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
> "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
> source.
>
> Few dts files assign value "1" to gpio-key,wakeup and in one instance a
> value "0" is assigned probably assuming it won't be enabled as a wakeup
> source. Since the presence of the boolean property indicates it is
> enabled, value of "0" have no value.
>
> This patch removes the property where value "0" is assigned and removes
> the value "1" in most of the other cases.
Why don't you just change everything to wakeup-source.
Rob
>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: linux-rockchip at lists.infradead.org
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: spear-devel at list.st.com
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> arch/arm/boot/dts/rk3066a-bqcurie2.dts | 3 +--
> arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
> arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
> arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
> arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
> arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
> arch/arm/boot/dts/rk3288-r89.dts | 2 +-
> arch/arm/boot/dts/spear1310-evb.dts | 2 +-
> arch/arm/boot/dts/spear1340-evb.dts | 2 +-
> arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
> arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
> 11 files changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> index c0273755431a..71a15772cda6 100644
> --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> @@ -74,7 +74,7 @@
> linux,code = <116>;
> label = "GPIO Key Power";
> linux,input-type = <1>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> debounce-interval = <100>;
> };
> button at 1 {
> @@ -82,7 +82,6 @@
> linux,code = <104>;
> label = "GPIO Key Vol-";
> linux,input-type = <1>;
> - gpio-key,wakeup = <0>;
> debounce-interval = <100>;
> };
> /* VOL+ comes somehow thru the ADC */
> diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
> index e36383c701dc..72bf52a04506 100644
> --- a/arch/arm/boot/dts/rk3066a-rayeager.dts
> +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
> @@ -65,7 +65,7 @@
> #size-cells = <0>;
>
> button at 0 {
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
> label = "GPIO Power";
> linux,code = <116>;
> diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
> index d2180e5d2b05..ba6b174777e7 100644
> --- a/arch/arm/boot/dts/rk3188-radxarock.dts
> +++ b/arch/arm/boot/dts/rk3188-radxarock.dts
> @@ -63,7 +63,7 @@
> linux,code = <116>;
> label = "GPIO Key Power";
> linux,input-type = <1>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> debounce-interval = <100>;
> };
> };
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
> index f6d2e7894b05..ab013155f04f 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -103,7 +103,7 @@
> linux,code = <116>;
> label = "GPIO Key Power";
> linux,input-type = <1>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> debounce-interval = <100>;
> };
> };
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
> index 20fa0ef0b96b..4fa2dedd0c7a 100644
> --- a/arch/arm/boot/dts/rk3288-firefly.dtsi
> +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
> @@ -67,7 +67,7 @@
> #size-cells = <0>;
>
> button at 0 {
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> label = "GPIO Power";
> linux,code = <116>;
> diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
> index f82b956ebf17..9b7f389c38e5 100644
> --- a/arch/arm/boot/dts/rk3288-popmetal.dts
> +++ b/arch/arm/boot/dts/rk3288-popmetal.dts
> @@ -74,7 +74,7 @@
> linux,code = <116>;
> label = "GPIO Key Power";
> linux,input-type = <1>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> debounce-interval = <100>;
> };
> };
> diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
> index 14b9fc73c8a4..2ee425523f5c 100644
> --- a/arch/arm/boot/dts/rk3288-r89.dts
> +++ b/arch/arm/boot/dts/rk3288-r89.dts
> @@ -73,7 +73,7 @@
> linux,code = <116>;
> label = "GPIO Key Power";
> linux,input-type = <1>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> debounce-interval = <100>;
> };
> };
> diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
> index e48857249ce7..6673d74ab0c0 100644
> --- a/arch/arm/boot/dts/spear1310-evb.dts
> +++ b/arch/arm/boot/dts/spear1310-evb.dts
> @@ -161,7 +161,7 @@
> linux,code = <0x100>;
> gpios = <&gpio0 7 0x4>;
> debounce-interval = <20>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> };
> };
>
> diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
> index c611f5606dfe..9071344fa47c 100644
> --- a/arch/arm/boot/dts/spear1340-evb.dts
> +++ b/arch/arm/boot/dts/spear1340-evb.dts
> @@ -223,7 +223,7 @@
> linux,code = <0x100>;
> gpios = <&gpio1 1 0x4>;
> debounce-interval = <20>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> };
> };
>
> diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
> index 0aa6fef5ce22..3c5b28c0fce4 100644
> --- a/arch/arm/boot/dts/spear320-hmi.dts
> +++ b/arch/arm/boot/dts/spear320-hmi.dts
> @@ -141,7 +141,7 @@
> linux,code = <0x100>;
> gpios = <&stmpegpio 3 0x4>;
> debounce-interval = <20>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> };
>
> button at 2 {
> @@ -149,7 +149,7 @@
> linux,code = <0x200>;
> gpios = <&stmpegpio 2 0x4>;
> debounce-interval = <20>;
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
> index 401a81231eb9..58a2829d9ea7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
> @@ -71,7 +71,7 @@
> pinctrl-0 = <&pwr_key>;
>
> button at 0 {
> - gpio-key,wakeup = <1>;
> + gpio-key,wakeup;
> gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> label = "GPIO Power";
> linux,code = <116>;
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean
2015-10-13 14:07 ` Rob Herring
@ 2015-10-13 14:26 ` Sudeep Holla
0 siblings, 0 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-13 14:26 UTC (permalink / raw)
To: linux-arm-kernel
On 13/10/15 15:07, Rob Herring wrote:
> On Tue, Oct 13, 2015 at 8:32 AM, Sudeep Holla <sudeep.holla@arm.com> wrote:
>> Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
>> "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
>> source.
>>
>> Few dts files assign value "1" to gpio-key,wakeup and in one instance a
>> value "0" is assigned probably assuming it won't be enabled as a wakeup
>> source. Since the presence of the boolean property indicates it is
>> enabled, value of "0" have no value.
>>
>> This patch removes the property where value "0" is assigned and removes
>> the value "1" in most of the other cases.
>
> Why don't you just change everything to wakeup-source.
>
Agreed, I wanted to do that but was not sure if that's acceptable.
I will update it, now I know that you are fine with it.
I also plan to find all the variety of bindings we have and fix them
retaining only those which are handled in the current kernel code as
legacy support.
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property
2015-10-13 13:32 ` [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean Sudeep Holla
2015-10-13 14:07 ` Rob Herring
@ 2015-10-13 14:38 ` Sudeep Holla
2015-10-13 15:08 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key,wakeup " Viresh Kumar
2015-10-13 17:52 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup " Heiko Stübner
1 sibling, 2 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-13 14:38 UTC (permalink / raw)
To: linux-arm-kernel
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.
Few dts files assign value "1" to gpio-key,wakeup and in one instance a
value "0" is assigned probably assuming it won't be enabled as a wakeup
source. Since the presence of the boolean property indicates it is
enabled, value of "0" have no value.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property which inturn fixes the above mentioned issue.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip at lists.infradead.org
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 3 +--
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
arch/arm/boot/dts/spear1340-evb.dts | 2 +-
arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
11 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index c0273755431a..93be8f066e6d 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -74,7 +74,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
debounce-interval = <100>;
};
button at 1 {
@@ -82,7 +82,6 @@
linux,code = <104>;
label = "GPIO Key Vol-";
linux,input-type = <1>;
- gpio-key,wakeup = <0>;
debounce-interval = <100>;
};
/* VOL+ comes somehow thru the ADC */
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index e36383c701dc..da1c37a721c0 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -65,7 +65,7 @@
#size-cells = <0>;
button at 0 {
- gpio-key,wakeup = <1>;
+ wakeup-source;
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5d2b05..acd3bb940e9a 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -63,7 +63,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e7894b05..e35cebc69e87 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -103,7 +103,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 20fa0ef0b96b..c5dd26139b63 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -67,7 +67,7 @@
#size-cells = <0>;
button at 0 {
- gpio-key,wakeup = <1>;
+ wakeup-source;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index f82b956ebf17..34a0b063b3ec 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -74,7 +74,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc73c8a4..dc2f83a38d4f 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -73,7 +73,7 @@
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index e48857249ce7..84101e4eebbf 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -161,7 +161,7 @@
linux,code = <0x100>;
gpios = <&gpio0 7 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index c611f5606dfe..6565f3cb866f 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -223,7 +223,7 @@
linux,code = <0x100>;
gpios = <&gpio1 1 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0aa6fef5ce22..0d0da1f65f0e 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -141,7 +141,7 @@
linux,code = <0x100>;
gpios = <&stmpegpio 3 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
button at 2 {
@@ -149,7 +149,7 @@
linux,code = <0x200>;
gpios = <&stmpegpio 2 0x4>;
debounce-interval = <20>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 401a81231eb9..730bac3a1c0a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -71,7 +71,7 @@
pinctrl-0 = <&pwr_key>;
button at 0 {
- gpio-key,wakeup = <1>;
+ wakeup-source;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key,wakeup with wakeup-source property
2015-10-13 14:38 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property Sudeep Holla
@ 2015-10-13 15:08 ` Viresh Kumar
2015-10-13 17:52 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup " Heiko Stübner
1 sibling, 0 replies; 12+ messages in thread
From: Viresh Kumar @ 2015-10-13 15:08 UTC (permalink / raw)
To: linux-arm-kernel
On 13-10-15, 15:38, Sudeep Holla wrote:
> Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
> "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
> source.
>
> Few dts files assign value "1" to gpio-key,wakeup and in one instance a
> value "0" is assigned probably assuming it won't be enabled as a wakeup
> source. Since the presence of the boolean property indicates it is
> enabled, value of "0" have no value.
>
> This patch replaces the legacy "gpio-key,wakeup" with the unified
> "wakeup-source" property which inturn fixes the above mentioned issue.
>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: linux-rockchip at lists.infradead.org
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> arch/arm/boot/dts/spear1310-evb.dts | 2 +-
> arch/arm/boot/dts/spear1340-evb.dts | 2 +-
> arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property
2015-10-13 14:38 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property Sudeep Holla
2015-10-13 15:08 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key,wakeup " Viresh Kumar
@ 2015-10-13 17:52 ` Heiko Stübner
1 sibling, 0 replies; 12+ messages in thread
From: Heiko Stübner @ 2015-10-13 17:52 UTC (permalink / raw)
To: linux-arm-kernel
Am Dienstag, 13. Oktober 2015, 15:38:53 schrieb Sudeep Holla:
> Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
> "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
> source.
>
> Few dts files assign value "1" to gpio-key,wakeup and in one instance a
> value "0" is assigned probably assuming it won't be enabled as a wakeup
> source. Since the presence of the boolean property indicates it is
> enabled, value of "0" have no value.
>
> This patch replaces the legacy "gpio-key,wakeup" with the unified
> "wakeup-source" property which inturn fixes the above mentioned issue.
>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: linux-rockchip at lists.infradead.org
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> arch/arm/boot/dts/rk3066a-bqcurie2.dts | 3 +--
> arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
> arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
> arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
> arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
> arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
> arch/arm/boot/dts/rk3288-r89.dts | 2 +-
[...]
> arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property
2015-10-13 13:32 [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property Sudeep Holla
2015-10-13 13:32 ` [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean Sudeep Holla
@ 2015-10-14 0:13 ` Simon Horman
2015-10-14 9:01 ` Sudeep Holla
2015-10-14 15:27 ` Sudeep Holla
2015-10-15 14:57 ` Linus Walleij
3 siblings, 1 reply; 12+ messages in thread
From: Simon Horman @ 2015-10-14 0:13 UTC (permalink / raw)
To: linux-arm-kernel
[cc linux-sh]
On Tue, Oct 13, 2015 at 02:32:43PM +0100, Sudeep Holla wrote:
> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
> two boolean properties to enable gpio buttons as wakeup source:
> 1. "wakeup-source" or
> 2. the legacy "gpio-key,wakeup"
>
> However juno, ste-snowball and emev2-kzm9d dts file have a undetected
> "wakeup" property to indictate the wakeup source.
>
> This patch fixes it by making use of "wakeup-source" property.
>
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++----
> arch/arm/boot/dts/ste-snowball.dts | 10 +++++-----
> arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------
> 3 files changed, 15 insertions(+), 15 deletions(-)
emev2-kzm9d portion:
Acked-by: Simon Horman <horms+renesas@verge.net.au>
My preferred course of action would be to take that portion through the
renesas tree if it was broken out into a separate patch. But I won't
object if someone wants to take the whole patch/series.
> diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
> index 955c24ee4a8c..8c24975e8f9d 100644
> --- a/arch/arm/boot/dts/emev2-kzm9d.dts
> +++ b/arch/arm/boot/dts/emev2-kzm9d.dts
> @@ -35,28 +35,28 @@
>
> button at 1 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> label = "DSW2-1";
> linux,code = <KEY_1>;
> gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> };
> button at 2 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> label = "DSW2-2";
> linux,code = <KEY_2>;
> gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> };
> button at 3 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> label = "DSW2-3";
> linux,code = <KEY_3>;
> gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> };
> button at 4 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> label = "DSW2-4";
> linux,code = <KEY_4>;
> gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
> index 32a5ccb14e7e..e80e42163883 100644
> --- a/arch/arm/boot/dts/ste-snowball.dts
> +++ b/arch/arm/boot/dts/ste-snowball.dts
> @@ -47,35 +47,35 @@
>
> button at 1 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <2>;
> label = "userpb";
> gpios = <&gpio1 0 0x4>;
> };
> button at 2 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <3>;
> label = "extkb1";
> gpios = <&gpio4 23 0x4>;
> };
> button at 3 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <4>;
> label = "extkb2";
> gpios = <&gpio4 24 0x4>;
> };
> button at 4 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <5>;
> label = "extkb3";
> gpios = <&gpio5 1 0x4>;
> };
> button at 5 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <6>;
> label = "extkb4";
> gpios = <&gpio5 2 0x4>;
> diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> index 05e461dc6c1f..a15e1fb4d192 100644
> --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> @@ -61,42 +61,42 @@
>
> button at 1 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <116>;
> label = "POWER";
> gpios = <&iofpga_gpio0 0 0x4>;
> };
> button at 2 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <102>;
> label = "HOME";
> gpios = <&iofpga_gpio0 1 0x4>;
> };
> button at 3 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <152>;
> label = "RLOCK";
> gpios = <&iofpga_gpio0 2 0x4>;
> };
> button at 4 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <115>;
> label = "VOL+";
> gpios = <&iofpga_gpio0 3 0x4>;
> };
> button at 5 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <114>;
> label = "VOL-";
> gpios = <&iofpga_gpio0 4 0x4>;
> };
> button at 6 {
> debounce_interval = <50>;
> - wakeup = <1>;
> + wakeup-source;
> linux,code = <99>;
> label = "NMI";
> gpios = <&iofpga_gpio0 5 0x4>;
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property
2015-10-14 0:13 ` [PATCH 1/2] ARM: dts: fix gpio-keys " Simon Horman
@ 2015-10-14 9:01 ` Sudeep Holla
0 siblings, 0 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-14 9:01 UTC (permalink / raw)
To: linux-arm-kernel
On 14/10/15 01:13, Simon Horman wrote:
> [cc linux-sh]
>
> On Tue, Oct 13, 2015 at 02:32:43PM +0100, Sudeep Holla wrote:
>> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
>> two boolean properties to enable gpio buttons as wakeup source:
>> 1. "wakeup-source" or
>> 2. the legacy "gpio-key,wakeup"
>>
>> However juno, ste-snowball and emev2-kzm9d dts file have a undetected
>> "wakeup" property to indictate the wakeup source.
>>
>> This patch fixes it by making use of "wakeup-source" property.
>>
>> Cc: Simon Horman <horms@verge.net.au>
>> Cc: Magnus Damm <magnus.damm@gmail.com>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>> ---
>> arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++----
>> arch/arm/boot/dts/ste-snowball.dts | 10 +++++-----
>> arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------
>> 3 files changed, 15 insertions(+), 15 deletions(-)
>
> emev2-kzm9d portion:
>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>
>
> My preferred course of action would be to take that portion through the
> renesas tree if it was broken out into a separate patch. But I won't
> object if someone wants to take the whole patch/series.
I can split this patch, but it is more like a bug fix IMO, I can't use
these GPIO as wakeup on Juno. So I hope arm-soc guys take it directly.
If not, I can split and sent it separately.
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property
2015-10-13 13:32 [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property Sudeep Holla
2015-10-13 13:32 ` [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean Sudeep Holla
2015-10-14 0:13 ` [PATCH 1/2] ARM: dts: fix gpio-keys " Simon Horman
@ 2015-10-14 15:27 ` Sudeep Holla
2015-10-15 14:57 ` Linus Walleij
3 siblings, 0 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-14 15:27 UTC (permalink / raw)
To: linux-arm-kernel
Hi Linus,
On 13/10/15 14:32, Sudeep Holla wrote:
> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
> two boolean properties to enable gpio buttons as wakeup source:
> 1. "wakeup-source" or
> 2. the legacy "gpio-key,wakeup"
>
> However juno, ste-snowball and emev2-kzm9d dts file have a undetected
> "wakeup" property to indictate the wakeup source.
>
> This patch fixes it by making use of "wakeup-source" property.
>
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
Please review this and provide ack if you are fine with the change for
ste-snowball. I can then ask arm-soc guys to pick this up as fix for v4.3
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property
2015-10-13 13:32 [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property Sudeep Holla
` (2 preceding siblings ...)
2015-10-14 15:27 ` Sudeep Holla
@ 2015-10-15 14:57 ` Linus Walleij
2015-10-15 15:21 ` Sudeep Holla
3 siblings, 1 reply; 12+ messages in thread
From: Linus Walleij @ 2015-10-15 14:57 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 13, 2015 at 3:32 PM, Sudeep Holla <sudeep.holla@arm.com> wrote:
> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
> two boolean properties to enable gpio buttons as wakeup source:
> 1. "wakeup-source" or
> 2. the legacy "gpio-key,wakeup"
>
> However juno, ste-snowball and emev2-kzm9d dts file have a undetected
> "wakeup" property to indictate the wakeup source.
>
> This patch fixes it by making use of "wakeup-source" property.
>
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
OK nice,
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property
2015-10-15 14:57 ` Linus Walleij
@ 2015-10-15 15:21 ` Sudeep Holla
0 siblings, 0 replies; 12+ messages in thread
From: Sudeep Holla @ 2015-10-15 15:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On 15/10/15 15:57, Linus Walleij wrote:
> On Tue, Oct 13, 2015 at 3:32 PM, Sudeep Holla <sudeep.holla@arm.com> wrote:
>
>> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
>> two boolean properties to enable gpio buttons as wakeup source:
>> 1. "wakeup-source" or
>> 2. the legacy "gpio-key,wakeup"
>>
>> However juno, ste-snowball and emev2-kzm9d dts file have a undetected
>> "wakeup" property to indicate the wakeup source.
>>
>> This patch fixes it by making use of "wakeup-source" property.
>>
>> Cc: Simon Horman <horms@verge.net.au>
>> Cc: Magnus Damm <magnus.damm@gmail.com>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>
> OK nice,
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
Can you pick this up as fix for v4.3 with Ack from Simon and Linus
Walleij ? I will repost 2/2 as a part of bigger cleanup for v4.4
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-10-15 15:21 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-13 13:32 [PATCH 1/2] ARM: dts: fix gpio-keys wakeup-source property Sudeep Holla
2015-10-13 13:32 ` [PATCH 2/2] ARM: dts: change gpio-key,wakeup property to boolean Sudeep Holla
2015-10-13 14:07 ` Rob Herring
2015-10-13 14:26 ` Sudeep Holla
2015-10-13 14:38 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup with wakeup-source property Sudeep Holla
2015-10-13 15:08 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key,wakeup " Viresh Kumar
2015-10-13 17:52 ` [PATCH 2/2][UPDATE] ARM: dts: replace gpio-key, wakeup " Heiko Stübner
2015-10-14 0:13 ` [PATCH 1/2] ARM: dts: fix gpio-keys " Simon Horman
2015-10-14 9:01 ` Sudeep Holla
2015-10-14 15:27 ` Sudeep Holla
2015-10-15 14:57 ` Linus Walleij
2015-10-15 15:21 ` Sudeep Holla
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).