linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/17] irqchip: Convert all alloc/xlate users from of_node to fwnode
Date: Wed, 14 Oct 2015 16:31:17 +0100	[thread overview]
Message-ID: <561E7545.9070305@arm.com> (raw)
In-Reply-To: <561E7408.3050106@linaro.org>

On 14/10/15 16:26, Tomasz Nowicki wrote:
> Hi Marc,
> 
> On 13.10.2015 13:51, Marc Zyngier wrote:
>> Since we now have a generic data structure to express an
>> interrupt specifier, convert all hierarchical irqchips that
>> are OF based to use a fwnode_handle as part of their alloc
>> and xlate (which becomes translate) callbacks.
>>
>> As most of these drivers have dependencies (they exchange IRQ
>> specifiers), change them all in a single, massive patch...
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
>> ---
>>   arch/arm/mach-exynos/suspend.c       | 55 ++++++++++++++++---------------
>>   arch/arm/mach-imx/gpc.c              | 55 ++++++++++++++++---------------
>>   arch/arm/mach-omap2/omap-wakeupgen.c | 55 ++++++++++++++++---------------
>>   drivers/irqchip/irq-crossbar.c       | 62 ++++++++++++++++++----------------
>>   drivers/irqchip/irq-gic-v2m.c        | 18 ++++++----
>>   drivers/irqchip/irq-gic-v3-its.c     | 20 ++++++-----
>>   drivers/irqchip/irq-gic-v3.c         | 49 +++++++++++++--------------
>>   drivers/irqchip/irq-gic.c            | 33 ++++++++++++++++---
>>   drivers/irqchip/irq-imx-gpcv2.c      | 64 ++++++++++++++++--------------------
>>   drivers/irqchip/irq-mtk-sysirq.c     | 49 ++++++++++++++-------------
>>   drivers/irqchip/irq-nvic.c           | 18 +++++++---
>>   drivers/irqchip/irq-tegra.c          | 55 ++++++++++++++++---------------
>>   drivers/irqchip/irq-vf610-mscm-ir.c  | 42 +++++++++++++++--------
>>   13 files changed, 323 insertions(+), 252 deletions(-)
>>
> 
> [...]
> 
>>
>>   static int its_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
>> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
>> index 5793880..05d010b 100644
>> --- a/drivers/irqchip/irq-gic-v3.c
>> +++ b/drivers/irqchip/irq-gic-v3.c
>> @@ -737,32 +737,30 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
>>   	return 0;
>>   }
>>
>> -static int gic_irq_domain_xlate(struct irq_domain *d,
>> -				struct device_node *controller,
>> -				const u32 *intspec, unsigned int intsize,
>> -				unsigned long *out_hwirq, unsigned int *out_type)
>> +static int gic_irq_domain_translate(struct irq_domain *d,
>> +				    struct irq_fwspec *fwspec,
>> +				    unsigned long *hwirq,
>> +				    unsigned int *type)
>>   {
>> -	if (irq_domain_get_of_node(d) != controller)
>> -		return -EINVAL;
>> -	if (intsize < 3)
>> -		return -EINVAL;
>> +	if (is_of_node(fwspec->fwnode)) {
>> +		if (fwspec->param_count < 3)
>> +			return -EINVAL;
>>
>> -	switch(intspec[0]) {
>> -	case 0:			/* SPI */
>> -		*out_hwirq = intspec[1] + 32;
>> -		break;
>> -	case 1:			/* PPI */
>> -		*out_hwirq = intspec[1] + 16;
>> -		break;
>> -	case GIC_IRQ_TYPE_LPI:	/* LPI */
>> -		*out_hwirq = intspec[1];
>> -		break;
>> -	default:
>> -		return -EINVAL;
>> +		/* Get the interrupt number and add 16 to skip over SGIs */
>> +		*hwirq = fwspec->param[1] + 16;
>> +
>> +		/*
>> +		 * For SPIs, we need to add 16 more to get the GIC irq
>> +		 * ID number
>> +		 */
>> +		if (!fwspec->param[0])
>> +			*hwirq += 16;
>> +
>> +		*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
>> +		return 0;
>>   	}
>>
>> -	*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
>> -	return 0;
>> +	return -EINVAL;
>>   }
> 
> What about GIC_IRQ_TYPE_LPI type? Previously we leaved interrupt line nr 
> and now +32.

Please see the patch I've posted earlier that address this particular issue:

https://lkml.org/lkml/2015/10/14/272

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2015-10-14 15:31 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-13 11:51 [PATCH v2 00/17] Divorcing irqdomain and device_node Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 01/17] irqdomain: Use irq_domain_get_of_node() instead of direct field access Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 02/17] irqdomain: Convert irqdomain->of_node to fwnode Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 03/17] irqdomain: Allow irq domain lookup by fwnode Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 04/17] irqdomain: Introduce a firmware-specific IRQ specifier structure Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 05/17] irqchip: Convert all alloc/xlate users from of_node to fwnode Marc Zyngier
2015-10-14 15:26   ` Tomasz Nowicki
2015-10-14 15:31     ` Marc Zyngier [this message]
2015-10-14 15:37       ` Tomasz Nowicki
2015-10-13 11:51 ` [PATCH v2 06/17] irqdomain: Introduce irq_create_fwspec_mapping Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 07/17] irqdomain: Introduce irq_domain_create_{linear, tree} Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 08/17] irqdomain: Add a fwnode_handle allocator Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 09/17] acpi/gsi: Always perform an irq domain lookup Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 10/17] acpi/gsi: Add acpi_set_irq_model to initialize the GSI layer Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 11/17] irqchip/gic: Get rid of gic_init_bases() Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 12/17] irqchip/gic: Switch ACPI support to stacked domains Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 13/17] irqchip/gic: Kill the xlate method Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 14/17] acpi/gsi: Cleanup acpi_register_gsi Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 15/17] irqdomain: Introduce irq_domain_create_hierarchy Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 16/17] irqdomain/msi: Use fwnode instead of of_node Marc Zyngier
2015-10-13 11:51 ` [PATCH v2 17/17] irqdomain: Documentation updates Marc Zyngier
2015-10-13 13:49 ` [PATCH v2 00/17] Divorcing irqdomain and device_node Hanjun Guo
2015-10-13 15:33   ` Hanjun Guo
2015-10-13 15:38   ` Marc Zyngier
2015-10-13 16:39 ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=561E7545.9070305@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).