From: wei@redhat.com (Wei Huang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 10/20] KVM: ARM64: Add reset and access handlers for PMCCNTR register
Date: Fri, 16 Oct 2015 10:06:35 -0500 [thread overview]
Message-ID: <5621127B.8070704@redhat.com> (raw)
In-Reply-To: <1443133885-3366-11-git-send-email-shannon.zhao@linaro.org>
On 09/24/2015 05:31 PM, Shannon Zhao wrote:
> Since the reset value of PMCCNTR is UNKNOWN, use reset_unknown for its
> reset handler. Add a new case to emulate reading to PMCCNTR register.
>
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
> arch/arm64/kvm/sys_regs.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index e7f6058..c38c2de 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -518,6 +518,12 @@ static bool access_pmu_regs(struct kvm_vcpu *vcpu,
> }
> } else {
> switch (r->reg) {
> + case PMCCNTR_EL0: {
> + val = kvm_pmu_get_counter_value(vcpu,
> + ARMV8_MAX_COUNTERS - 1);
> + *vcpu_reg(vcpu, p->Rt) = val;
> + break;
> + }
> case PMXEVCNTR_EL0: {
> val = kvm_pmu_get_counter_value(vcpu,
> vcpu_sys_reg(vcpu, PMSELR_EL0));
> @@ -748,7 +754,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
> access_pmu_regs, reset_pmceid, PMCEID1_EL0 },
> /* PMCCNTR_EL0 */
> { Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b000),
> - trap_raz_wi },
> + access_pmu_regs, reset_unknown, PMCCNTR_EL0 },
> /* PMXEVTYPER_EL0 */
> { Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b001),
> access_pmu_regs, reset_unknown, PMXEVTYPER_EL0 },
> @@ -997,6 +1003,12 @@ static bool access_pmu_cp15_regs(struct kvm_vcpu *vcpu,
> }
> } else {
> switch (r->reg) {
> + case c9_PMCCNTR: {
> + val = kvm_pmu_get_counter_value(vcpu,
> + ARMV8_MAX_COUNTERS - 1);
PMCCNTR is for cycle counter. There is a filter register, PMCCFILTR_EL0,
associated with it. When kvm_pmu_set_counter_event_type() is called, I
didn't see this filter config been used in perf_event_attr when
perf_event is created.
> + *vcpu_reg(vcpu, p->Rt) = val;
> + break;
> + }
> case c9_PMXEVCNTR: {
> val = kvm_pmu_get_counter_value(vcpu,
> vcpu_cp15(vcpu, c9_PMSELR));
> @@ -1051,7 +1063,8 @@ static const struct sys_reg_desc cp15_regs[] = {
> reset_pmceid, c9_PMCEID0 },
> { Op1( 0), CRn( 9), CRm(12), Op2( 7), access_pmu_cp15_regs,
> reset_pmceid, c9_PMCEID1 },
> - { Op1( 0), CRn( 9), CRm(13), Op2( 0), trap_raz_wi },
> + { Op1( 0), CRn( 9), CRm(13), Op2( 0), access_pmu_cp15_regs,
> + reset_unknown_cp15, c9_PMCCNTR },
> { Op1( 0), CRn( 9), CRm(13), Op2( 1), access_pmu_cp15_regs,
> reset_unknown_cp15, c9_PMXEVTYPER },
> { Op1( 0), CRn( 9), CRm(13), Op2( 2), access_pmu_cp15_regs,
>
next prev parent reply other threads:[~2015-10-16 15:06 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 22:31 [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 01/20] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 02/20] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 03/20] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-10-07 8:25 ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-10-16 5:35 ` Wei Huang
2015-10-21 6:27 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 05/20] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 06/20] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 07/20] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-10-16 6:08 ` Wei Huang
2015-10-21 6:32 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 08/20] KVM: ARM64: Add reset and access handlers for PMXEVTYPER register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 09/20] KVM: ARM64: Add reset and access handlers for PMXEVCNTR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 10/20] KVM: ARM64: Add reset and access handlers for PMCCNTR register Shannon Zhao
2015-10-16 15:06 ` Wei Huang [this message]
2015-10-21 6:48 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 11/20] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 12/20] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 13/20] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 14/20] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 15/20] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-10-16 15:25 ` Wei Huang
2015-10-21 7:02 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 16/20] KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 17/20] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-10-07 8:17 ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 18/20] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-10-16 15:28 ` Wei Huang
2015-09-24 22:31 ` [PATCH v3 19/20] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 20/20] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-10-16 4:55 ` [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Wei Huang
2015-10-16 17:01 ` Christopher Covington
2015-10-21 7:26 ` Shannon Zhao
2015-10-26 11:33 ` Christoffer Dall
2015-10-27 1:15 ` Shannon Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5621127B.8070704@redhat.com \
--to=wei@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).