From: alim.akhtar@samsung.com (Alim Akhtar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/6] Switch to generic syscon regmap based drivers
Date: Wed, 21 Oct 2015 11:39:32 +0530 [thread overview]
Message-ID: <56272C1C.8040007@samsung.com> (raw)
In-Reply-To: <1606098.olLAyTIhB3@dell2.five-lan.de>
On 10/20/2015 10:53 PM, Markus Reichl wrote:
> Am Dienstag, 20. Oktober 2015, 21:22:05 schrieb Alim Akhtar:
>> On Tue, Oct 20, 2015 at 9:17 PM, Alim Akhtar <alim.akhtar@gmail.com> wrote:
>>> Hi Markus,
>>>
>>> On Tue, Oct 20, 2015 at 8:29 PM, Markus Reichl <m.reichl@fivetechno.de> wrote:
>>>> Am 20.10.2015 um 11:24 schrieb Alim Akhtar:
>>>>> Now we have a nice way to reboot/poweroff system using a generic
>>>>> syscon regmap based drivers, this series moves exynos SoCs to
>>>>> make use of the same.
>>>>>
>>>>> Changes since v1:
>>>>> * Added a comment about the register information
>>>>> * Droped defconfig changes as disscussed
>>>>> * Collected various Reviewed-by, Tested-by and Acked-by tags
>>>>> * Added SYSCON-{RESET, POWEROFF} to select from Kconfig
>>>>>
>>>>> Alim Akhtar (6):
>>>>> arm: dts: Add syscon-{reboot, poweroff} nodes for exynos3250 SoCs
>>>>> arm: dts: Add syscon-{reboot, poweroff} nodes for exynos4
>>>>> arm: dts: Add syscon-{reboot, poweroff} nodes for exynos5
>>>>> arm: dts: Add syscon-{reboot, poweroff} nodes for exynos5410 SoC
>>>>> ARM: exynos: select POWER_RESET_SYSCON and
>>>>> POWER_RESET_SYSCON_POWEROFF
>>>>> ARM: EXYNOS: Remove code for restart and poweroff for exynos SoCs
>>>>>
>>>>> arch/arm/boot/dts/exynos3250.dtsi | 14 ++++++++++++
>>>>> arch/arm/boot/dts/exynos4.dtsi | 14 ++++++++++++
>>>>> arch/arm/boot/dts/exynos5.dtsi | 14 ++++++++++++
>>>>> arch/arm/boot/dts/exynos5410.dtsi | 14 ++++++++++++
>>>>> arch/arm/mach-exynos/Kconfig | 3 +++
>>>>> arch/arm/mach-exynos/pmu.c | 43 -------------------------------------
>>>>> 6 files changed, 59 insertions(+), 43 deletions(-)
>>>>>
>>>>
>>>> Hi Alim,
>>>>
>>>> I have installed your patch set above with git am on top of
>>>> 4.3.0-rc6-00108-gce1fad2 torvalds/linux of today
>>>> with make exynos_defconfig on Odroid U3.
>>>>
>>> which exynos soc Odroid U3 uses?
>>>
>> OK, I can see its uses exynos4412 and exynos4412-odroidu3.dts does
>> include exynos4.dtsi,
>> so these should have worked.
>>
>>>> "halt -p" worked (power 0.0W).
>>>> "reboot" got stuck at 0.5W.
>>>>
>>> reboot stuck mean system does not reboot any more?
>
> It freezes when going for reboot.
> Have to power off/on to boot again.
>
> Btw I use an mmc, not an sd-card.
> No other HW connected, just LAN-cable.
> Bootloader is u-boot v2015.10.
> o
Have checked on 4.3.0-rc6-00006-gd03c139e7e77, still works on peach boards.
Sorry I don't have Odroid U3 with me, may be Javier or Krzysztof might
help here to check whats wrong. To me its looks more of a board specific
issue for now.
>>> As far as I can see there in __no__ functional changes that my patch introduce.
>>> So ideally it should have work. My patches are based on the top on
>>> vanilla v4.3-rc5.
>>> (25cb62b Linux 4.3-rc5), can you check at this commit?
>
> Will try tomorrow.
>
>>>
>>> Will check with the commit mentioned by you tomorrow.
>>>
>>>>
>>>> Without your patch set reboot worked.
>>>>
>>>>
>>>> Thanks,
>>>> --
>>>> Markus Reichl
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>>>> the body of a message to majordomo at vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>>> --
>>> Regards,
>>> Alim
>>
>>
>>
>>
> Thanks,
> --
> Markus
>
next prev parent reply other threads:[~2015-10-21 6:09 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 9:24 [PATCH v2 0/6] Switch to generic syscon regmap based drivers Alim Akhtar
2015-10-20 9:24 ` [PATCH v2 1/6] arm: dts: Add syscon-{reboot, poweroff} nodes for exynos3250 SoCs Alim Akhtar
2015-11-20 0:20 ` Krzysztof Kozlowski
2015-10-20 9:24 ` [PATCH v2 2/6] arm: dts: Add syscon-{reboot, poweroff} nodes for exynos4 Alim Akhtar
2015-11-20 0:20 ` Krzysztof Kozlowski
2015-10-20 9:24 ` [PATCH v2 3/6] arm: dts: Add syscon-{reboot, poweroff} nodes for exynos5 Alim Akhtar
2015-10-20 10:30 ` Javier Martinez Canillas
2015-10-21 11:55 ` Anand Moon
2015-11-20 0:22 ` Krzysztof Kozlowski
2015-10-20 9:24 ` [PATCH v2 4/6] arm: dts: Add syscon-{reboot, poweroff} nodes for exynos5410 SoC Alim Akhtar
2015-11-20 0:21 ` Krzysztof Kozlowski
2015-10-20 9:24 ` [PATCH v2 5/6] ARM: exynos: select POWER_RESET_SYSCON and POWER_RESET_SYSCON_POWEROFF Alim Akhtar
2015-10-20 10:30 ` Javier Martinez Canillas
2015-10-21 0:14 ` Krzysztof Kozlowski
2015-10-20 9:24 ` [PATCH v2 6/6] ARM: EXYNOS: Remove code for restart and poweroff for exynos SoCs Alim Akhtar
2015-10-20 10:31 ` Javier Martinez Canillas
2015-10-20 10:29 ` [PATCH v2 0/6] Switch to generic syscon regmap based drivers Javier Martinez Canillas
2015-10-20 14:59 ` Markus Reichl
2015-10-20 15:47 ` Alim Akhtar
2015-10-20 15:52 ` Alim Akhtar
2015-10-20 17:23 ` Markus Reichl
2015-10-21 6:09 ` Alim Akhtar [this message]
2015-10-21 10:16 ` Javier Martinez Canillas
2015-10-21 10:42 ` Markus Reichl
2015-10-21 10:46 ` Alim Akhtar
2015-10-21 11:46 ` Anand Moon
2015-10-21 13:25 ` Javier Martinez Canillas
2015-10-21 10:44 ` Alim Akhtar
2015-10-21 13:23 ` Javier Martinez Canillas
2015-10-21 14:56 ` Alim Akhtar
2015-10-21 14:50 ` Alim Akhtar
2015-10-21 14:55 ` Javier Martinez Canillas
2015-10-21 15:01 ` Alim Akhtar
2015-10-22 0:17 ` Krzysztof Kozlowski
2015-10-22 3:54 ` Alim Akhtar
2015-11-19 18:06 ` Alim Akhtar
2015-11-19 18:18 ` Javier Martinez Canillas
2015-11-20 0:46 ` Krzysztof Kozlowski
2015-11-20 5:08 ` Alim Akhtar
2015-10-23 18:52 ` Kukjin Kim
2015-10-23 18:59 ` Kukjin Kim
2015-10-21 0:08 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56272C1C.8040007@samsung.com \
--to=alim.akhtar@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).