[PATCH v2 0/2] ARM: OMAP2+ McASP(3) support for DRA7xx family

[peter.ujfalusi@ti.com (Peter Ujfalusi)]

Hi Paul,

On 10/14/2015 12:23 PM, Peter Ujfalusi wrote:
> Hi Paul,
> 
> This is the followup series for the hwmod changes needed to get audio working
> on DRA7xx family based boards.
> The DTS patches has been applied by Tony from the original series:
> http://www.spinics.net/lists/linux-omap/msg121473.html
> 
> I have addressed your comments in the hwmod data and did some research also
> regarding to the use of ahclkx as fclk in the original submission.
> It turned out that McASP _needs_ all clocks to be enabled (fclk, iclk and
> ahclkx/r) to be able to access registers. The original patch where we handled
> the ahclkx as fclk worked, because the fclk clock got enabled in the HW w/o
> any SW interaction.
> All in all, the McASP found in DRA7 needs all clocks to be enabled.
> To satisfy this I have introduced a new flag to hwmod, which means that the
> listed optional clocks need to be handled alongside with the fclk clock.

Can you, please look at this patch?

Thank you,
P?ter

> 
> Regards,
> Peter
> ---
> Peter Ujfalusi (2):
>   ARM: OMAP2+: hwmod: Add hwmod flag for HWMOD_OPT_CLKS_NEEDED
>   ARM: OMAP: DRA7: hwmod: Add data for McASP3
> 
>  arch/arm/mach-omap2/omap_hwmod.c          | 66 +++++++++++++++++--------------
>  arch/arm/mach-omap2/omap_hwmod.h          |  3 ++
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 56 ++++++++++++++++++++++++++
>  3 files changed, 95 insertions(+), 30 deletions(-)
>