From: marc_gonzalez@sigmadesigns.com (Marc Gonzalez)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 1/2] arm-soc: Import initial tango4 device tree
Date: Mon, 2 Nov 2015 16:18:45 +0100 [thread overview]
Message-ID: <56377ED5.4070203@sigmadesigns.com> (raw)
In-Reply-To: <56377E76.2080209@sigmadesigns.com>
This device tree was tested on a Sigma Designs SMP8758 Vantage-1172
development board.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/tango4-common.dtsi | 121 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/tango4-smp8758.dtsi | 30 ++++++++
arch/arm/boot/dts/tango4-vantage-1172.dts | 24 ++++++
4 files changed, 177 insertions(+)
create mode 100644 arch/arm/boot/dts/tango4-common.dtsi
create mode 100644 arch/arm/boot/dts/tango4-smp8758.dtsi
create mode 100644 arch/arm/boot/dts/tango4-vantage-1172.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a244f6..2499295051d5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -605,6 +605,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_ARCH_TANGOX) += \
+ tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
tegra20-iris-512.dtb \
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
new file mode 100644
index 000000000000..90e9a6e736ae
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -0,0 +1,121 @@
+/*
+ * Derived from Mans Rullgard's Tango3 DT
+ * https://github.com/mansr/linux-tangox
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clocks {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ };
+
+ clkgen: clkgen at 10000 {
+ compatible = "sigma,tango4-clkgen";
+ reg = <0x10000 0x40>;
+ clocks = <&xtal>;
+ clock-output-names = "cpuclk", "sysclk";
+ #clock-cells = <1>;
+ };
+ };
+
+ gic: interrupt-controller at 20001000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x20001000 0x1000>, <0x20000100 0x0100>;
+ };
+
+ l2cc: l2-cache-controller at 20100000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x20100000 0x1000>;
+ cache-level = <2>;
+ cache-unified;
+ };
+
+ periphclk: periphclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&clkgen 0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ #clock-cells = <0>;
+ };
+
+ twd-timer at 20000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20000600 0x10>;
+ interrupts = <GIC_PPI 13 0xf04>;
+ interrupt-parent = <&gic>;
+ clocks = <&periphclk>;
+ always-on;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tick-counter at 10048 {
+ compatible = "sigma,tick-counter";
+ reg = <0x10048 0x4>;
+ clocks = <&xtal>;
+ };
+
+ uart: serial at 10700 {
+ compatible = "ralink,rt2880-uart";
+ reg = <0x10700 0x30>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&irq0>;
+ clock-frequency = <7372800>;
+ reg-shift = <2>;
+ };
+
+ eth0: ethernet at 26000 {
+ reg = <0x26000 0x800>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&irq0>;
+ clocks = <&clkgen 1>;
+ };
+
+ intc: interrupt-controller at 6e000 {
+ reg = <0x6e000 0x400>;
+ ranges = <0 0x6e000 0x400>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ irq0: irq0 at 6e000 {
+ reg = <0x000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ irq1: irq1 at 6e100 {
+ reg = <0x100 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ irq2: irq2 at 6e300 {
+ reg = <0x300 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
new file mode 100644
index 000000000000..4eb23a12e27f
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
@@ -0,0 +1,30 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "sigma,tango4-smp";
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu at 1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ interrupt-parent = <&gic>;
+ interrupts =
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
new file mode 100644
index 000000000000..22de3624ed97
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+#include "tango4-smp8758.dtsi"
+#include "tango4-common.dtsi"
+
+/ {
+ model = "Sigma Designs SMP8758 Vantage-1172 dev board";
+ compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4";
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>; /* 2 GB */
+ };
+};
+
+ð0 {
+ compatible = "sigma,smp8758-ethernet", "sigma,smp8734-ethernet", "sigma,smp8642-ethernet", "aurora,nb8800";
+ phy-connection-type = "rgmii";
+ max-speed = <1000>;
+};
+
+&intc {
+ compatible = "sigma,smp8758-intc", "sigma,smp8642-intc";
+};
--
2.4.5
next prev parent reply other threads:[~2015-11-02 15:18 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-02 15:17 [PATCH v8 0/2] Sigma Designs Tango4 port Marc Gonzalez
2015-11-02 15:18 ` Marc Gonzalez [this message]
2015-11-02 16:01 ` [PATCH v8 1/2] arm-soc: Import initial tango4 device tree Måns Rullgård
2015-11-02 17:11 ` Marc Gonzalez
2015-11-02 17:59 ` Måns Rullgård
2015-11-03 0:57 ` Måns Rullgård
2015-11-02 20:33 ` Florian Fainelli
2015-11-02 15:19 ` [PATCH v8 2/2] arm-soc: Add support for arm-based tango4 platforms Marc Gonzalez
2015-11-02 16:22 ` Måns Rullgård
2015-11-02 17:33 ` Marc Gonzalez
2015-11-02 18:01 ` Måns Rullgård
2015-11-02 18:26 ` Mark Rutland
2015-11-02 18:30 ` Måns Rullgård
2015-11-02 18:37 ` santosh shilimkar
2015-11-03 8:34 ` Marc Gonzalez
2015-11-03 10:12 ` Måns Rullgård
2015-11-03 16:37 ` santosh shilimkar
2015-11-03 17:04 ` Marc Gonzalez
2015-11-03 18:02 ` Måns Rullgård
2015-11-02 15:52 ` [PATCH v8 0/2] Sigma Designs Tango4 port Marc Gonzalez
2015-11-02 21:40 ` Arnd Bergmann
2015-11-03 9:00 ` Marc Gonzalez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56377ED5.4070203@sigmadesigns.com \
--to=marc_gonzalez@sigmadesigns.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).