From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v2 3/4] ARM: BCM: Add SMP support for Broadcom NSP
Date: Fri, 06 Nov 2015 12:03:49 -0800 [thread overview]
Message-ID: <563D07A5.8090305@gmail.com> (raw)
In-Reply-To: <563D060D.6070606@gmail.com>
On 06/11/15 11:57, Florian Fainelli wrote:
> On 06/11/15 11:49, Kapil Hali wrote:
>> Add SMP support for Broadcom's Northstar Plus SoC
>> cpu enable method. This changes also consolidates
>> iProc family's - BCM NSP and BCM Kona, platform
>> SMP handling in a common file.
>>
>> Northstar Plus SoC is based on ARM Cortex-A9
>> revision r3p0 which requires configuration for ARM
>> Errata 764369 for SMP. This change adds the needed
>> configuration option.
>>
>> Signed-off-by: Kapil Hali <kapilh@broadcom.com>
>> ---
>
> Technically, this is not quite a RESEND, using the same git format-patch
> --subject command as before maybe?
>
> [snip]
>
>> +#ifndef __BCM_NSP_H
>> +#define __BCM_NSP_H
>> +
>> +extern void nsp_secondary_startup(void);
>
> This does not appear to be needed anymore since you use the standard
> secondary_boot entry point now.
>
>> +
>> +#endif /* __BCM_NSP_H */
>> diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c
>> similarity index 75%
>> rename from arch/arm/mach-bcm/kona_smp.c
>> rename to arch/arm/mach-bcm/platsmp.c
>> index 66a0465..925402f 100644
>> --- a/arch/arm/mach-bcm/kona_smp.c
>> +++ b/arch/arm/mach-bcm/platsmp.c
>> @@ -1,5 +1,5 @@
>> /*
>> - * Copyright (C) 2014 Broadcom Corporation
>> + * Copyright (C) 2014-2015 Broadcom Corporation
>> * Copyright 2014 Linaro Limited
>> *
>> * This program is free software; you can redistribute it and/or
>> @@ -12,16 +12,23 @@
>> * GNU General Public License for more details.
>> */
>>
>> -#include <linux/init.h>
>> +#include <linux/cpumask.h>
>> +#include <linux/delay.h>
>> #include <linux/errno.h>
>> +#include <linux/init.h>
>> #include <linux/io.h>
>> +#include <linux/jiffies.h>
>> #include <linux/of.h>
>> #include <linux/sched.h>
>> +#include <linux/smp.h>
>>
>> +#include <asm/cacheflush.h>
>> #include <asm/smp.h>
>> #include <asm/smp_plat.h>
>> #include <asm/smp_scu.h>
>>
>> +#include "bcm_nsp.h"
>
> Likewise.
>
>> +
>> /* Size of mapped Cortex A9 SCU address space */
>> #define CORTEX_A9_SCU_SIZE 0x58
>>
>> @@ -75,6 +82,37 @@ static int __init scu_a9_enable(void)
>> return 0;
>> }
>>
>> +static int nsp_write_lut(void)
>> +{
>> + void __iomem *sku_rom_lut;
>> + phys_addr_t secondary_startup_phy;
>> +
>> + if (!secondary_boot) {
>> + pr_warn("required secondary boot register not specified\n");
>> + return -EINVAL;
>> + }
>> +
>> + sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot,
>> + sizeof(secondary_boot));
>
> That looks weird to me, are not you intending to get a virtual mapping
> of the SKU ROM LUT base register address here? What would
> sizeof(function) return here?
secondary_boot != secondary_startup, I read it wrong, this is fine.
--
Florian
next prev parent reply other threads:[~2015-11-06 20:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-06 19:49 [PATCH RESEND v2 0/4] SMP support for Broadcom NSP Kapil Hali
2015-11-06 19:49 ` [PATCH RESEND v2 1/4] dt-bindings: add SMP enable-method " Kapil Hali
2015-11-06 19:49 ` [PATCH RESEND v2 2/4] ARM: dts: add SMP support " Kapil Hali
2015-11-06 19:49 ` [PATCH RESEND v2 3/4] ARM: BCM: Add " Kapil Hali
2015-11-06 19:57 ` Florian Fainelli
2015-11-06 20:03 ` Florian Fainelli [this message]
2015-11-09 10:09 ` Linus Walleij
2015-11-10 2:29 ` Florian Fainelli
2015-11-10 16:21 ` Kapil Hali
2015-11-16 21:09 ` Linus Walleij
2015-11-06 19:49 ` [PATCH RESEND v2 4/4] ARM: BCM: Add SMP support for Broadcom 4708 Kapil Hali
2015-11-25 0:06 ` [PATCH RESEND v2 0/4] SMP support for Broadcom NSP Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=563D07A5.8090305@gmail.com \
--to=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).