[PATCH v3 0/3] ARM: OMAP2+ McASP(3) support for DRA7xx family

[peter.ujfalusi@ti.com (Peter Ujfalusi)]

Tony,

On 10/30/2015 06:11 PM, Paul Walmsley wrote:
> Hi P?ter
> 
> On Fri, 30 Oct 2015, Peter Ujfalusi wrote:
> 
>> Changes since v2:
>> - DTS patch added which is needed because of the clock handling changes
>>
>> Felip Balbi reported that linux-next is broken right now since the DTS part of
>> the earlier series has been applied, but we do not have the mcasp hwmod in the
>> kernel:
>> ...
>> [    0.181029] platform 48468000.mcasp: Cannot lookup hwmod 'mcasp3'
>> ...
>> [    6.121072] davinci-mcasp 48468000.mcasp: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
>> [    6.130790] ------------[ cut here ]------------
>> [    6.135643] WARNING: CPU: 0 PID: 244 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c()
>> [    6.145576] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER2_P3 (Read): Data Access in User mode during Functional access
>> ...
>>
>> This is the followup series for the hwmod changes needed to get audio working
>> on DRA7xx family based boards.
>> The DTS patches has been applied by Tony from the original series:
>> http://www.spinics.net/lists/linux-omap/msg121473.html
>>
>> I have addressed your comments in the hwmod data and did some research also
>> regarding to the use of ahclkx as fclk in the original submission.
>> It turned out that McASP _needs_ all clocks to be enabled (fclk, iclk and
>> ahclkx/r) to be able to access registers. The original patch where we handled
>> the ahclkx as fclk worked, because the fclk clock got enabled in the HW w/o
>> any SW interaction.
>> All in all, the McASP found in DRA7 needs all clocks to be enabled.
>> To satisfy this I have introduced a new flag to hwmod, which means that the
>> listed optional clocks need to be handled alongside with the fclk clock.
> 
> Thanks.  I'm happy with your series and appreciate the indepth 
> investigation.  As you probably saw last week, we've hit the limit for 
> v4.4-rc1:
> 
> http://marc.info/?l=linux-omap&m=144564929721826&w=2
> 
> This is why I haven't done anything with this series at this time.  
> Unfortunately I don't have a DRA7xx board, so I can't do any testing.  
> But if this series fixes a problem with DRA7xx in linux-next, we should 
> definitely merge it.
> 
> Tony, if you want to take this now, you can either take it with my ack, or 
> I can send a pull request.  Or, if you'd prefer to take it for v4.4-rc2, 
> I can send a pull request after v4.4-rc1.

The ARM soc changes for 4.4 are now pulled in to mainline, including the
DRA7/72/X15 audio related DTS changes, but this three patch is not. This means
that dra7-evm, dra72-evm and bealge-x15 will not boot from mainline.
Is there a way to push these patches as soon as possible?

Thanks,
P?ter