From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 9/9] drivers: soc: Add support for Exynos PMU driver
Date: Fri, 13 Nov 2015 19:28:55 +0900 [thread overview]
Message-ID: <5645BB67.8050102@samsung.com> (raw)
In-Reply-To: <1447406983-27835-10-git-send-email-pankaj.dubey@samsung.com>
On 13.11.2015 18:29, Pankaj Dubey wrote:
> This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
> to "drivers/soc/samsung". This driver is mainly used for setting misc
> bits of register from PMU IP of Exynos SoC which will be required to
> configure before Suspend/Resume. Currently all these settings are done
> in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
> support, there is a need of this PMU driver in driver/* folder.
>
> This driver uses existing DT binding information and there should
> be no functionality change in the supported platforms.
>
> Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
> arch/arm/mach-exynos/Kconfig | 1 +
> arch/arm/mach-exynos/Makefile | 4 +---
> drivers/soc/samsung/Kconfig | 4 ++++
> drivers/soc/samsung/Makefile | 4 ++++
> arch/arm/mach-exynos/pmu.c => drivers/soc/samsung/exynos-pmu.c | 0
> {arch/arm/mach-exynos => drivers/soc/samsung}/exynos-pmu.h | 0
> {arch/arm/mach-exynos => drivers/soc/samsung}/exynos3250-pmu.c | 0
> {arch/arm/mach-exynos => drivers/soc/samsung}/exynos4-pmu.c | 0
> {arch/arm/mach-exynos => drivers/soc/samsung}/exynos5250-pmu.c | 0
> {arch/arm/mach-exynos => drivers/soc/samsung}/exynos5420-pmu.c | 0
> 10 files changed, 10 insertions(+), 3 deletions(-)
> rename arch/arm/mach-exynos/pmu.c => drivers/soc/samsung/exynos-pmu.c (100%)
> rename {arch/arm/mach-exynos => drivers/soc/samsung}/exynos-pmu.h (100%)
> rename {arch/arm/mach-exynos => drivers/soc/samsung}/exynos3250-pmu.c (100%)
> rename {arch/arm/mach-exynos => drivers/soc/samsung}/exynos4-pmu.c (100%)
> rename {arch/arm/mach-exynos => drivers/soc/samsung}/exynos5250-pmu.c (100%)
> rename {arch/arm/mach-exynos => drivers/soc/samsung}/exynos5420-pmu.c (100%)
>
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 83c85f5..874cb38 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -16,6 +16,7 @@ menuconfig ARCH_EXYNOS
> select ARM_GIC
> select COMMON_CLK_SAMSUNG
> select EXYNOS_THERMAL
> + select EXYNOS_PMU
> select EXYNOS_SROM if PM
> select HAVE_ARM_SCU if SMP
> select HAVE_S3C2410_I2C if I2C
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index 2d58063..34d29df 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -9,9 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
>
> # Core
>
> -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o \
> - exynos3250-pmu.o exynos4-pmu.o \
> - exynos5250-pmu.o exynos5420-pmu.o
> +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
>
> obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
> obj-$(CONFIG_PM_SLEEP) += suspend.o
> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
> index 2833b5b..f545d6c 100644
> --- a/drivers/soc/samsung/Kconfig
> +++ b/drivers/soc/samsung/Kconfig
> @@ -10,4 +10,8 @@ config EXYNOS_SROM
> bool
> depends on ARM && ARCH_EXYNOS && PM
>
> +config EXYNOS_PMU
> + bool
> + depends on ARCH_EXYNOS
> +
> endmenu
> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
> index 9c554d5..26fb489 100644
> --- a/drivers/soc/samsung/Makefile
> +++ b/drivers/soc/samsung/Makefile
> @@ -1 +1,5 @@
> obj-$(CONFIG_EXYNOS_SROM) += exynos-srom.o
> +ifdef CONFIG_ARM
> +obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \
> + exynos5250-pmu.o exynos5420-pmu.o
> +endif
Why ifdef CONFIG_ARM? This already depends on ARCH_EXYNOS. If you want
to limit to ARMv7 then add the dependency to Kconfig (just like
EXYNOS_SROM).
Rest looks ok - nice renames.
Best regards,
Krzysztof
> diff --git a/arch/arm/mach-exynos/pmu.c b/drivers/soc/samsung/exynos-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/pmu.c
> rename to drivers/soc/samsung/exynos-pmu.c
> diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
> similarity index 100%
> rename from arch/arm/mach-exynos/exynos-pmu.h
> rename to drivers/soc/samsung/exynos-pmu.h
> diff --git a/arch/arm/mach-exynos/exynos3250-pmu.c b/drivers/soc/samsung/exynos3250-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/exynos3250-pmu.c
> rename to drivers/soc/samsung/exynos3250-pmu.c
> diff --git a/arch/arm/mach-exynos/exynos4-pmu.c b/drivers/soc/samsung/exynos4-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/exynos4-pmu.c
> rename to drivers/soc/samsung/exynos4-pmu.c
> diff --git a/arch/arm/mach-exynos/exynos5250-pmu.c b/drivers/soc/samsung/exynos5250-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/exynos5250-pmu.c
> rename to drivers/soc/samsung/exynos5250-pmu.c
> diff --git a/arch/arm/mach-exynos/exynos5420-pmu.c b/drivers/soc/samsung/exynos5420-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/exynos5420-pmu.c
> rename to drivers/soc/samsung/exynos5420-pmu.c
>
next prev parent reply other threads:[~2015-11-13 10:28 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-13 9:29 [PATCH v5 0/9] samsung: pmu: split up SoC specific PMU data Pankaj Dubey
2015-11-13 9:29 ` [PATCH v5 1/9] ARM: EXYNOS: removing redundant code from regs-pmu.h Pankaj Dubey
2015-11-13 9:29 ` [PATCH v5 2/9] ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf Pankaj Dubey
2015-11-13 9:29 ` [PATCH v5 3/9] ARM: EXYNOS: Move pmu specific headers under "linux/soc/samsung" Pankaj Dubey
2015-11-13 10:06 ` Krzysztof Kozlowski
2015-11-13 9:29 ` [PATCH v5 4/9] ARM: EXYNOS: split up exynos3250 SoC specific PMU data Pankaj Dubey
2015-11-13 9:29 ` [PATCH v5 5/9] ARM: EXYNOS: split up exynos4 " Pankaj Dubey
2015-11-13 10:16 ` Krzysztof Kozlowski
2015-11-13 9:29 ` [PATCH v5 6/9] ARM: EXYNOS: split up exynos5250 " Pankaj Dubey
2015-11-13 9:29 ` [PATCH v5 7/9] ARM: EXYNOS: split up exynos5420 " Pankaj Dubey
2015-11-13 10:08 ` Krzysztof Kozlowski
2015-11-13 9:29 ` [PATCH v5 8/9] ARM: EXYNOS: rearrange static and non-static functions of PMU driver Pankaj Dubey
2015-11-13 10:09 ` Krzysztof Kozlowski
2015-11-13 9:29 ` [PATCH v5 9/9] drivers: soc: Add support for Exynos " Pankaj Dubey
2015-11-13 10:28 ` Krzysztof Kozlowski [this message]
2015-11-13 15:36 ` Pankaj Dubey
2015-11-14 11:30 ` Krzysztof Kozlowski
2015-11-17 3:44 ` pankaj.dubey
2015-11-17 4:28 ` Krzysztof Kozlowski
2015-11-14 11:24 ` [PATCH v5 0/9] samsung: pmu: split up SoC specific PMU data Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5645BB67.8050102@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).