[PATCH] extcon: palmas: add support for using VBUSDET output

[cw00.choi@samsung.com (Chanwoo Choi)]

Hi Felipe,

Looks good to me. But I have one comment.

On 2015? 11? 13? 02:57, Felipe Balbi wrote:
> TPS659038 can remux its GPIO_1 as VBUSDET output,
> which can be tied to a SoC GPIO and used as a VBUS
> interrupt.
> 
> Beagle X15 uses that, in fact, and without it, I
> could not get USB peripheral working with that
> board.
> 
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> ---
>  drivers/extcon/extcon-palmas.c | 22 ++++++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> index 93c30a885740..7985d092c069 100644
> --- a/drivers/extcon/extcon-palmas.c
> +++ b/drivers/extcon/extcon-palmas.c
> @@ -296,10 +296,28 @@ static int palmas_usb_probe(struct platform_device *pdev)
>  	}
>  
>  	if (palmas_usb->enable_vbus_detection) {
> +		int irq = platform_get_irq(pdev, 0);
> +
> +		if (irq > 0) {
> +			/* remux GPIO_1 as VBUSDET */
> +			status = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE,
> +					PALMAS_PRIMARY_SECONDARY_PAD1,
> +					PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK,
> +					(1 << 3));

PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT is appropriate instead of using '3'.
Also, I don't recommend the over line 80. The everything else is good


> +			if (status < 0) {
> +				dev_err(&pdev->dev, "can't remux GPIO1\n");
> +				return status;
> +			}
> +
> +			palmas_usb->vbus_irq = irq;
> +		} else {
> +			irq = regmap_irq_get_virq(palmas->irq_data,
> +					PALMAS_VBUS_IRQ);
> +			palmas_usb->vbus_irq = irq;
> +		}
> +
>  		palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data,
>  						       PALMAS_VBUS_OTG_IRQ);
> -		palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data,
> -							   PALMAS_VBUS_IRQ);
>  		status = devm_request_threaded_irq(palmas_usb->dev,
>  				palmas_usb->vbus_irq, NULL,
>  				palmas_vbus_irq_handler,
> 

Thanks,
Chanwoo Choi