From mboxrd@z Thu Jan 1 00:00:00 1970 From: cw00.choi@samsung.com (Chanwoo Choi) Date: Fri, 20 Nov 2015 14:39:33 +0900 Subject: [PATCH 2/2] arm: boot: beaglex15: pass correct interrupt In-Reply-To: <1447350781-20649-3-git-send-email-balbi@ti.com> References: <1447350781-20649-1-git-send-email-balbi@ti.com> <1447350781-20649-3-git-send-email-balbi@ti.com> Message-ID: <564EB215.5080209@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On 2015? 11? 13? 02:53, Felipe Balbi wrote: > According to latest schematics [1], GPIO_1/VBUSDET > on TPS659038 is tied to AM57x GPIO4_21. We can use > that as a VBUS interrupt, instead of relying on > PMIC's VBUS interrupts which don't seem to be firing > on x15 at all. > > A follow up patch will add support for using this > GPIO-based interrupt mechanism for notifying about > VBUS. > > [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf > > Signed-off-by: Felipe Balbi > --- > arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts > index 6f3a1a7ec5f9..5e47162f7883 100644 > --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts > +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts > @@ -560,6 +560,7 @@ > extcon_usb2: tps659038_usb { > compatible = "ti,palmas-usb-vid"; > ti,enable-vbus-detection; > + interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>; > }; > > }; > I check the schematic file. The GPIO4_21 pin is connected as following: - GPIO_1/VBUSDET -> PMIC_VBUS_DET -> VBUS_DET -> AM5728 GPIO4_21 pin Reviewed-by: Chanwoo Choi Thanks, Chanwoo Choi