From mboxrd@z Thu Jan  1 00:00:00 1970
From: rnayak@codeaurora.org (Rajendra Nayak)
Date: Mon, 23 Nov 2015 14:42:29 +0530
Subject: [PATCH 2/4] arm64: dts: Add msm8996 SoC and MTP board support
In-Reply-To: <1447809149-29724-3-git-send-email-sboyd@codeaurora.org>
References: <1447809149-29724-1-git-send-email-sboyd@codeaurora.org>
 <1447809149-29724-3-git-send-email-sboyd@codeaurora.org>
Message-ID: <5652D87D.20201@codeaurora.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org


On 11/18/2015 06:42 AM, Stephen Boyd wrote:
> Add initial device tree support for the Qualcomm MSM8996 SoC and
> MTP8996 evaluation board.
> 
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
[]...

> +
> +		spmi_bus: qcom,spmi at 400f000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x400f000 0x1000>,
> +			      <0x4400000 0x800000>,
> +			      <0x4c00000 0x800000>,
> +			      <0x5800000 0x200000>,
> +			      <0x400a000 0x002100>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		mmcc: clock-controller at 8c0000 {
> +			compatible = "qcom,mmcc-msm8996";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			reg = <0x8c0000 0xc0000>;

I think the size here should be 0x40000 and not 0xc0000

regards,
Rajendra

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation