From: mehta.salil.lnk@gmail.com (Salil Mehta)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 net-next 4/5] net:hns: Add support of ethtool TSO set option for Hip06 in HNS
Date: Mon, 23 Nov 2015 12:05:06 +0000 [thread overview]
Message-ID: <565300F2.7030308@gmail.com> (raw)
In-Reply-To: <564F2915.1090507@cogentembedded.com>
On 20/11/15 14:07, Sergei Shtylyov wrote:
> On 11/19/2015 11:58 PM, Salil Mehta wrote:
>
>> From: Salil <salil.mehta@huawei.com>
>>
>> This patch adds the support of ethtool TSO option to V1 patch,
>> meant to add support of Hip06 SoC to HNS
>>
>> Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
>> Signed-off-by: lisheng <lisheng011@huawei.com>
>> ---
>> drivers/net/ethernet/hisilicon/hns/hns_enet.c | 47
>> +++++++++++++++++++++++++
>> 1 file changed, 47 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
>> b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
>> index 055e14c..a0763ab 100644
>> --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
>> +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
>> @@ -1386,6 +1386,51 @@ static int hns_nic_change_mtu(struct
>> net_device *ndev, int new_mtu)
>> return ret;
>> }
>>
>> +static int hns_nic_set_features(struct net_device *netdev,
>> + netdev_features_t features)
>> +{
>> + struct hns_nic_priv *priv = netdev_priv(netdev);
>> + struct hnae_handle *h = priv->ae_handle;
>> +
>> + switch (priv->enet_ver) {
>> + case AE_VERSION_1:
>> + if ((features & NETIF_F_TSO) || (features & NETIF_F_TSO6))
>
> if ((features & (NETIF_F_TSO| NETIF_F_TSO6))
Thanks. changed in V4 PATCH.
>
>> + netdev_info(netdev, "enet v1 do not support tso!\n");
>> + break;
>
> The *break* should have the same indentation level as *if*.
Thanks for pointing out. changed in V4 PATCH.
>
>> + default:
>> + if ((features & NETIF_F_TSO) || (features & NETIF_F_TSO6)) {
>
> if ((features & (NETIF_F_TSO| NETIF_F_TSO6))
>
>> + priv->ops.fill_desc = fill_tso_desc;
>> + priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso;
>> + /* The chip only support 7*4096 */
>> + netif_set_gso_max_size(netdev, 7 * 4096);
>> + h->dev->ops->set_tso_stats(h, 1);
>> + } else {
>> + priv->ops.fill_desc = fill_v2_desc;
>> + priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx;
>> + h->dev->ops->set_tso_stats(h, 0);
>> + }
>> + break;
>
> Same here.
Thanks for pointing out. changed in V4 PATCH.
>
>> + }
>> + netdev->features = features;
>> + return 0;
>> +}
>> +
>> +static netdev_features_t hns_nic_fix_features(
>> + struct net_device *netdev, netdev_features_t features)
>> +{
>> + struct hns_nic_priv *priv = netdev_priv(netdev);
>> +
>> + switch (priv->enet_ver) {
>> + case AE_VERSION_1:
>> + features &= ~(NETIF_F_TSO | NETIF_F_TSO6 |
>> + NETIF_F_HW_VLAN_CTAG_FILTER);
>> + break;
>> + default:
>> + break;
>> + }
>
> Here it's indented correctly.
Got it, thanks!
>
>> + return features;
>> +}
>> +
>> /**
>> * nic_set_multicast_list - set mutl mac address
>> * @netdev: net device
> [...]
>
> MBR, Sergei
>
next prev parent reply other threads:[~2015-11-23 12:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 20:58 [PATCH V3 net-next 0/5] net:hns: Add support of Hip06 SoC to the Hislicon Network Subsystem Salil Mehta
2015-11-19 20:58 ` [PATCH V3 net-next 1/5] " Salil Mehta
2015-11-22 9:19 ` Yuval Mintz
2015-11-26 7:44 ` Salil Mehta
2015-11-19 20:58 ` [PATCH V3 net-next 2/5] net:hns: Add Hip06 "RSS(Receive Side Scaling)" support to HNS Driver Salil Mehta
2015-11-22 9:30 ` Yuval Mintz
2015-11-26 7:31 ` Salil Mehta
2015-11-19 20:58 ` [PATCH V3 net-next 3/5] net:hns: Add Hip06 "TSO(TCP Segment Offload)" support " Salil Mehta
2015-11-22 8:49 ` Yuval Mintz
2015-11-26 8:19 ` Salil Mehta
2015-11-19 20:58 ` [PATCH V3 net-next 4/5] net:hns: Add support of ethtool TSO set option for Hip06 in HNS Salil Mehta
2015-11-20 14:07 ` Sergei Shtylyov
2015-11-23 12:05 ` Salil Mehta [this message]
2015-11-19 20:58 ` [PATCH V3 net-next 5/5] net:hns: Add the init code to disable Hip06 "Hardware VLAN assist" Salil Mehta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565300F2.7030308@gmail.com \
--to=mehta.salil.lnk@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).