From mboxrd@z Thu Jan 1 00:00:00 1970 From: santosh.shilimkar@oracle.com (santosh.shilimkar at oracle.com) Date: Sun, 29 Nov 2015 16:29:29 -0800 Subject: [PATCH v3] clocksource: arm_global_timer: fix suspend resume In-Reply-To: <1448653624-25006-1-git-send-email-grygorii.strashko@ti.com> References: <1448653624-25006-1-git-send-email-grygorii.strashko@ti.com> Message-ID: <565B9869.10800@oracle.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/27/15 11:47 AM, Grygorii Strashko wrote: > Now the System stall is observed on TI AM437x based board > (am437x-gp-evm) during resuming from System suspend when ARM Global > timer is selected as clocksource device (CPUIdle not enabled) - SysRq are working, > but nothing else. > > The reason of stall is that ARM Global timer loses its contexts during > System suspend: > GT_CONTROL.TIMER_ENABLE = 0 (unbanked) > GT_COUNTERx = 0 > > Hence, update ARM Global timer driver to reflect above behaviour > - re-enable ARM Global timer on resume GT_CONTROL.TIMER_ENABLE = 1. > > CC: Arnd Bergmann > Cc: John Stultz > Cc: Felipe Balbi > Cc: Tony Lindgren > Cc: Santosh Shilimkar > Cc: Marc Zyngier > Signed-off-by: Grygorii Strashko > --- > Changes in v3: > - dropped all DT specific code > Changes in v2: > - suspend/resume simplified: nothing is stored any more and > ARM GT just re-enabled > Link on v2: > https://lkml.org/lkml/2015/11/20/355 > Link on v1: > https://lkml.org/lkml/2015/11/13/456 > Looks reasonable to me. > drivers/clocksource/arm_global_timer.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c > index a2cb6fa..10d1417 100644 > --- a/drivers/clocksource/arm_global_timer.c > +++ b/drivers/clocksource/arm_global_timer.c > @@ -195,12 +195,19 @@ static cycle_t gt_clocksource_read(struct clocksource *cs) > return gt_counter_read(); > } > > +static void gt_resume(struct clocksource *cs) > +{ > + /* re-enable timer on resume */ > + writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); Check if its disabled before enabling it. Other than that, Reviewed-by: Santosh Shilimkar