From mboxrd@z Thu Jan  1 00:00:00 1970
From: hs@denx.de (Heiko Schocher)
Date: Mon, 30 Nov 2015 07:51:01 +0100
Subject: [PATCH v2] arm, am335x: add support for the bosch shc board
In-Reply-To: <564C35D0.8060609@denx.de>
References: <1447748655-2088-1-git-send-email-hs@denx.de>
 <564B9C3D.7070303@ti.com> <564C35D0.8060609@denx.de>
Message-ID: <565BF1D5.8020708@denx.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hello all,

Am 18.11.2015 um 09:24 schrieb Heiko Schocher:
> Hello Dave,
>
> Am 17.11.2015 um 22:29 schrieb Dave Gerlach:
>> Hi,
>> On 11/17/2015 02:24 AM, Heiko Schocher wrote:
>>> add support for the am335x based shc board.
>>>
>>> UART: 0-2 and 4
>>> DRAM: 512 MiB
>>> MMC:  OMAP SD/MMC: 0 @ 26 MHz
>>>        OMAP SD/MMC: 1 @ 26 MHz
>>> I2C:  at24 eeprom, pcf8563
>>> USB:  USB1 (host)
>>>
>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>> ---
>>> The following patches are needed to get all working
>>> for the shc board:
>>> - disable clkout on pcf8563
>>>    accepted.
>>>    http://www.spinics.net/lists/devicetree/msg98542.html
>>>
>>> - leds: leds-gpio: add shutdown function
>>>    accepted.
>>>    https://lkml.org/lkml/2015/10/13/169
>>>
>>> - net: phy: smsc: disable energy detect mode
>>>    accepted
>>>    [PATCH v2 2/2] net: phy: smsc: disable energy detect mode
>>>    https://lkml.org/lkml/2015/10/17/2
>>>    [PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
>>>    https://lkml.org/lkml/2015/10/17/4
>>>
>>> - ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
>>>    http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html
>>>    @Dave: What is the current state of this patch?
>>>    I have the same problem here on this am335x based board
>>>
>>
>> A different approach is being taken for resolving the issue of rtc hwmod on am43x epos evm [1],
>> which is what I was attempting to solve with the patch you have linked. We decided to avoid changing
>> omap_hwmod code and I haven't been pursuing the ti,no-init flag anymore.
>
> Maybe I overlook something, but I cannot see, how [1] solves the RTC
> hwmod problem on am335x SoC based boards. Not all boards have this problem,
> so the RTC hwmod cannot be disabled for all am335x boards ...
>
> It must be somehow configurable for boards ... I have am335x boards
> which use the rtc from the SoC

gentle ping ...

No more comments on this patch? Is it Ok for mainline or are
there more issues?

bye,
Heiko
>
>> Regards,
>> Dave
>>
>> [1] http://www.spinics.net/lists/linux-omap/msg121987.html
>
> bye,
> Heiko

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany